How To: Gauge Relocation & Top Tree Install on a Harley-Davidson Road Glide ST!
HTML-код
- Опубликовано: 8 сен 2024
- Today we are going to show you how to install our top tree, gauge relocation, and bar setup on your Harley-Davidson Road Glide. We start off with a stock 2022 Road Glide ST and walk you through what it takes to install these parts and clean up your wiring. Ditch those stock wheel barrow bars and check out our performance set up. Guaranteed to take your Road Glide to the next level!
This setup will work on 2014 - 2022 Harley Davidson Road Glide Models. Please note with the CVO flash also known as keyless entry, you will still need to have your key fob to start the bike. For security when you park your bike you can lock your forks and make sure to take your key fob with you and no one will be able to start your bike.
Check out all of the parts that we used in this video here.
Top Tree - www.thrashinsu...
Gauge Relocation - www.thrashinsu...
Risers - www.thrashinsu...
Bars - www.thrashinsu...
Perch Clamps - www.thrashinsu...
Grips - www.thrashinsu...
Get Dialed Now!
You guys have a good chemistry together and I mean that in the straightest way lol, and it results in high quality content . The video literally makes me wanna buy some bars
I always use a tiny bit of dielectric grease on every connection so if water ever did work its way into a connector it wont corrode or short anything😊❤
Great tip!
Man! I’m nervous and inspired at the same time… contemplating doing my own install on my 2023 Road Glide ST.
Same! I think we just gotta go for it!
What a great install video, Juan and lance great team and how long have you been buddies? Nice and clean🤙🇨🇦
The Raddest Set up. Finest Made In America components, Cleanest design with full functionality&comfort and simply the best handling. ⚡️ The installation video nails it!
The door that hides the lock is so sick!
You guys kill it! Love the working flow w you and cool Juan..🤙🏽
My top tree and gauge relocation has just arrived so I'm looking forward to getting this installed. The video makes it look super simple due to the clear step by step process you show!!!! thanks in advance and I'll send some photos when it's done!!!
Wow Thank You Lance & Juan.
I'm about to install it on a Road Glide......Have to wait for the Gauge relocation & Triple Clamp to make to to Australia.....Will Really Help to make it easy to Install now....It was good to see how you Cleanned up the Cables.
6 1/2 Pulback Risers & High Bend Bars & Perch clamps....
Cheers
🤙🇦🇺🤙
Hell yeah doin it now on a 19 Road glide special built to 153ci
Very well explained, and entertaining.. Great Job Boyz 🤙
Thank you for making this video, I have the same bike and I just finished installing all the foot controls, and am seriously considering changing from my current config now that you have these products available. Also, what tape did you use to protect the bike, so many options so any links would be great! Hope you enjoy Sturgis and keep the vids coming!.
Love how you guys give all the info needed to install. Great vid and great look. Wish your bars excepted heated grips
Our bars do accept heated grips. Lance has the stock Harley OEM heated grips on his CVO bagger with Our bars.
@@THRASHIN I must have done something wrong cause mine pushed out the center and broke.
Need to make stuff like this for Dyna !
Probably the best install video I’ve ever watched. Thanks again for the best products and great videos!
Whelp... looks like Thrashings getting my money. Nice job guys and great looking parts.
Man i can’t wait to get this setup… super sick guys🤘🏻🤘🏻🤘🏻
Just finished install of this setup. Loving it.
I’m gonna swing by and get all the parts I need for the guage relo . I have the thrashin T bars installed already ( came w/ bike 2022 FLTRX)
Lance, you're a really helpful guy for folks installing gear they buy from Thrashin' Supply. Great how to. I sometimes wonder how many GoldFling rider's customize their Hondas?
This company has it going on . Great instructions to install their accessories. They are the best ! I’m getting a new cvo Road Glide in two weeks and will be ordering a lot of their products. As a retired Harley Davidson dealer from 1957 to 2020 I can tell you this is the products out period . Abernathy’s Harley Davidson Union City Tn . A legend !
Awesome install you two work great together. That's what you call team work. 👍
Very well done vid boys. Edited to perfection. Thanks for all the tips. I will be watching this again when I finally get this whole setup for my rg. Cheers from down under
great video can't wait to install on my RG when my parts come in.
Thank you 🙏🙏. This is the video I needed today !
Great video. You & Juan dynamic duo. 🤙🏿
Good video I enjoyed it keep thinking of having a ride on the new HD st but in the UK we don't have easy access to all the stuff you chaps have stateside. Hope my videos improve in time LOL Ride safe.I have liked and subscribed me and the missis are watching your sturgess ride
Appreciate the vid..I always do some kind of “oh shit” thing when doing projects like this..I’m really wanting this system for my newly acquired 2019 RG Special. Need a Thrashin certified installer..
Cannot wait for my
More install videos please!!!!
15 to 30 mins at harley lol. Ayways love your vlogs 🤘
Hi, the bike looks fantastic with the new handlebar. Do you know the measurements of the holes for the cables on switches and the hole in the middle of the handlebar?
Looks great!
Wonderful instructional video, one of the best. Hope you make one like this for your new Low Rider ST.
awesome video.. helped me decide which setup to get now.. Thrashin all the way.. Question: I'm 5' 8" thinking about smaller risers like the 6.5 pullback with mid height bars. Any concerns with this setup?
Is there a product list/links of all the components needed for this job? I looked around and couldn’t find it. Thanks in advanced. What I got from the video: Bars, risers, top tree, relocation kit, and perch clamp. Am I missing anything? Thanks! Awesome video and great products.
What’s highest you can go with riser and bars? I’m tall 6’4 and find 16 inch and over comfy for me.
I’ve been wondering this myself. I run 16 apes as well as a lepera a daddy long leg seat to be comfortable. Im curious with the 9.5 risers and bars on this setup what the height is comparable to apes.
Nice ⚡️🔥
Teamwork! 🤘
Love it! My bars and risers get here Tuesday I can't wait! Can you guys confirm what height you need to extend the clutch cable on the 21+ bikes? I read anything over 12" it needs to be extended but this setup is at 13.5" correct??
this is a 22 bike and didnt need the extended cables so I am guessing the info you have been given isnt correct.
I have 16 road glide ultra and I have ordered the exact same setup in this video. I wonder if I need extended clutch/brake cables etc, have u installed yours? please let me know thanks.
@@wldxb yes I installed mine and no I did not need to extend anything.
@@indecisivegearhead thanks brother
Are you able to measure the distance from the tank to the bars , I can see how I can use the gas cap as a reference point but I’d like to know the hight.
Do you have this set up for the Street Glide St ? If not is it in the works ? I will be your 1st customer 🙏
Now do a riser/bar install for the new Lowrider ST ;)
great guys, Im from Mexico
When will they make the video so that the ignition stays in stock?
What size do you wear and what is your height?
love it!
Can I do this to my 23 cvo road glide anniversary bike.
Questions? I am thinking about adding this bar setup on my 2020 road glide limited. I would like to go with the 14.5" setup, is there a need to swap out the brake and Hydraulic clutch lines with longer ones? i have the 14" KST spearheads on the bike now and did not need to replace these lines. Question 2- what will need to be done with the accessory switches i have on my bike? i have a switch on my gauge nacelle for running lights. Is there an option for those of us with these factory switches? Love your products, i installed your 9.5" pullbacks and your footboards on my Lowrider ST.
What does it mean that “the bike is flashed” in regards to the lock wire?
I’m a 5,9 , you think that set up will work for me ?
Sweden support 🤘🏼🇸🇪
Guage pod does not include the mounting bracket that will run you another 2 bills
What happend to the ignition switch? Is it gone?
Did the exact same install. Everything works but my fuel/voltage gauge isn’t working. Any ideas? I have 2022 RG ST. Thanks
What size are the bolts going into the riser clamp for gauge relocation? I need 2 of them I didn’t find em in my kit.
Do you still need to carry the FOB after enabling the keyless ignition ?
Yes you do
Follow up comment. As I have this bike, and I have been stepping through the process considering going with this solution, I had a couple additional questions. What riser did you use on the ST? Looks like the 9.5 riser but you did not state that in the video that I recall, and what size wire looms did you use to clean it all up? Looked very nice once done. Thanks 👍
On the Lowrider st we did not use wire looms. On the road slide st we did, we supply it with the gauge relocation
@@THRASHIN Thank you for your response, This comment is on the Road Glide ST video so great that you supply the loom. Is it a 1 inch loom and what riser did you use on the Road Glide ST for the build. Thanks
If you guys need a test dummy for street glide stuff let me know lol
Do the Dakota digital gauges fit in the gauge housing?
so if you end up taking off the plastic nacelle with the ignition switch on it, you wouldn't have to purchase the riser adapter since you can bolt the riser right to the tree (whether its stock or the Thrashin one) yeah?
Correct. Just stock ones not pretty and only has 1 location to mount risers. And highly recommended to do solid mount bushings, definitely don’t use the stock bushings.
@@THRASHIN thank you for the speedy reply! Once I get some plow money saved up this winter time I’m definitely going to be placing a order for the whole kit with you guys. Speedo relocation and all!
What is the price of all the parts I have the same bike. I really want to do it
will this help me learn to wheelie
Wrong video. But we do have one, it’s in another “How To” thanks for watching!
Hey there, if the top tree does not require bushings, is there a notable difference in vibrations back to the grips? No bushings do mean no wiggle ever, so that is a Pro for sure.
We have noticed that there is less oscillation of the handlebars since there is no play. In terms of vibration, we have not noticed a significant increase in vibration while going to our solid set up, we have many of customers currently running it with no issues 🤘🏻
@@THRASHIN Thanks for the quick reply! Most likely gonna get this top tree.
@thrashinsupply if you compared the height of this setup to apes what would it be? Thanks for the great video!
Hey Zach, hard to compare without knowing bike model and height model we are comparing. But you can usually expect a more aggressive and controlled feel with a bar set up like in this video. Feel free to give us a call 818-626-8350
@@THRASHIN absolutely makes sense….. 2020 road glide special
What's the tape?
Disappointed when I was told Jaun doesn’t take phone calls anymore. Need clarification on toque settings.
What torque wrench do you use?
What size do I need if I'm 6'2
How much a set up like that cost with labor??? 22 rode glide special.
What up! We don’t do labor so we don’t know those prices. But you can call us or add up a cart on the site and get dialed in 👍🏻
What grip glue do you recommend for installing your grips?
I have personally used a very small amount of pro taper grip glue. Some guys like windex, some use spray paint, some use most motocross grip glue. But use a lite amount, cause they are thin grips
Are you guys in So. Cal?
@thrashin do you guys no longer offer this top tree?
This one? www.thrashinsupply.com/collections/baggerparts/products/road-glide-top-tree-black
@@THRASHIN wtf 🤦🏻♂️ I was looking on the site for probably 30 minutes for that. I’m an idiot 🥴 Thank you! 🤙🏼
Tesa tape would look cleaner and not as sticky as electrical tape
Can we use stock cables for 9.5 risers and gauge relocation?
Yes. 🔥 but to be sure, feel free to give us a call 818-626-8350
How do you ground the top tree?
Juan do u always work on bikes so slow in the canyons?
I honestly try not to work on bikes in the canyons.
Do I need longer brake lines?
No 👍🏻
Thank you
Well, that's 2000 $ just for the parts right ?
How can I get some of those grips?!
They’re on the ‘site, Coming soon
Harley states they do not do this! 3 different Harley I have called in NY and CT and all state they don’t do keyless ignition
I know this is old but maybe can help someone else. I believe you tell them you want to flash for Ignition delete or maybe can be simple and say you want it to start like a CVO. I had it done before I picked my RG up. So stupid to have to turn on first. Any dealer should be able to do it. If they don't know then no way in hell let them ever touch your bike.
For all the money Harley want for a bike... There should be no plastic pieces....I dgaf...
To bad you kids did not light up your working environment, very dark video.
Just doing our best brother.
Very well explained, and entertaining.. Great Job Boyz 🤙
Looks awesome.