Cast Concrete HOME Building Easy and Cheap Part 3

Поделиться
HTML-код
  • Опубликовано: 8 дек 2024

Комментарии • 56

  • @clyoest
    @clyoest 13 дней назад +1

    Its looking better every day ☺️

  • @smartbiz888
    @smartbiz888 14 дней назад +7

    Looking good!
    Late night of work here, so I caught this immediately...
    Lucky to be the 2d commenter!
    Anyway...
    Enjoy your T-day and TC!
    👍😎👍

  • @mannymanuel7030
    @mannymanuel7030 14 дней назад +5

    Good job great start 💪👍

  • @joefugate9338
    @joefugate9338 13 дней назад +3

    Thanks, James. A lot of armchair quarterbacks like to make rude comments. You handle it much better than I would. Take care.

  • @redneckgamer1460
    @redneckgamer1460 13 дней назад +1

    Hey James I'm still here watching everyday the build is looking amazing brother! I'm back here in the Philippines with the wife we will come stay at your beautiful place once you are all done with everything!

    • @TexasFilipino
      @TexasFilipino  13 дней назад +1

      You guys come on down! The door is always open

    • @redneckgamer1460
      @redneckgamer1460 13 дней назад +1

      @TexasFilipino yes sir sure will ! I have been watching a long time brother pretty much every video...I'm from Southern Oklahoma! Like maybe 160 miles from were you lived close to Dallas area!

  • @RandyLee-om4ni
    @RandyLee-om4ni 14 дней назад +2

    Looking good

  • @JWDREAM-d3x
    @JWDREAM-d3x 13 дней назад +2

    Yippie another build pour these are my absolute favs brother thank ya thank ya 🙏.
    Bless your heart ❤️ 😂. Man those upper rooms overlooking the pool will be allsum i would have no problem staying there in any of your beautiful rooms james . I would feel safer in your place in any typhon or small to medium quake because i see the quality that gos in them . And i know you know your shit you have proven it to me over & over on many different projects of all types . Im amazed you have this knowledge stored in that Texas size head in just a few short years lol 😆. Im jealous 😆. I really enjoyed this vedieo as i do all of your stuff James God Bless bro .

    • @TexasFilipino
      @TexasFilipino  13 дней назад +1

      Your so funny and kick ass my friend.

  • @JeremyLuebke
    @JeremyLuebke 14 дней назад +2

    James, the mason of my heart ;)

    • @TexasFilipino
      @TexasFilipino  14 дней назад +2

      funny

    • @JWDREAM-d3x
      @JWDREAM-d3x 13 дней назад +1

      ​@TexasFilipino It might just be that way huh lmao 🤣

  • @Johnb-ht1je
    @Johnb-ht1je 13 дней назад +1

    Great work going on. Looks awesome. By the way, nice 47 hat!

    • @TexasFilipino
      @TexasFilipino  13 дней назад +1

      Thank you. I am confused on the 47 hat statement as I don't have one. I checked the video and I am wearing an Dallas Stars and a Salt Life cap.

  • @mikeheyjoebuenavistadreamin272
    @mikeheyjoebuenavistadreamin272 14 дней назад +1

    haters gonna hate, but im gonna congratulate instead .. looking good as always

  • @VinceSalzer
    @VinceSalzer 14 дней назад +3

    We need to have this technique throughout the world.

  • @josephkumnick7696
    @josephkumnick7696 13 дней назад +1

    Happy Thanksgiving my Friend!

  • @bryanprehoda
    @bryanprehoda 14 дней назад +1

    Good foreman

  • @joshuaheap4549
    @joshuaheap4549 13 дней назад +1

    Nice video like I said before I Love the plug for the rooms. I would like to know the names of the rooms, as there shown . So I can book without guessing 😊

  • @scottsinthephilippines
    @scottsinthephilippines 13 дней назад +1

    👍

  • @ChuckFasst
    @ChuckFasst 14 дней назад +3

    Give a man a hammer - he looks for a nail. Give a man a stick- he looks for a nail. Wait, what? Why did I say that? 🧐

  • @outbackyank6122
    @outbackyank6122 14 дней назад +1

    That tv is longer than your banca boat!!!!! lololol

  • @jsully4064
    @jsully4064 14 дней назад +1

    Can you send me some plans for a 2 bedroom 1 bath ? Whats the roofing options? Thanks and myself do enjoy the content you have on your channel.

    • @TexasFilipino
      @TexasFilipino  13 дней назад +1

      I don't do work for other people. Thanks for the support.

  • @Twobeers1
    @Twobeers1 14 дней назад +2

    The Geckos are watching you work. They are good to have around, they eat at lot of insects. Good progress. Just sayin

  • @alanporter2694
    @alanporter2694 14 дней назад +2

    This is all new for me (from N. Ireland). Do you have to add any bonding agent, when overnight bottom pour dries overnight, to enable top pour to join it?

    • @TexasFilipino
      @TexasFilipino  14 дней назад +2

      it's a compression joint it does not need to bond.

    • @JWDREAM-d3x
      @JWDREAM-d3x 13 дней назад +1

      ​@TexasFilipino It might just be that way huh lmao 🤣

  • @airwess3369
    @airwess3369 14 дней назад +1

    1st

  • @stacy58306
    @stacy58306 14 дней назад +3

    I know they don't make hard toe flip flops in the Philippines.

  • @kyleesteban467
    @kyleesteban467 14 дней назад +2

    Your team is doing a phenomenal job well done.
    In the future, I will need to hire five or six of Your guys. Because You (Mike) gave Your mentee(s) team true formulated working skill as their Mentor.
    They will be working side by side with Masonic Master Stone Masons.

    • @TexasFilipino
      @TexasFilipino  14 дней назад +1

      Mike? I'm James

    • @JWDREAM-d3x
      @JWDREAM-d3x 13 дней назад

      ​@TexasFilipino Might just be like that huh lmao 🤣

  • @1rockinthedadbod
    @1rockinthedadbod 13 дней назад +1

    Is a poured wall build really cheaper than block? Of so, by what percentage?

    • @TexasFilipino
      @TexasFilipino  13 дней назад +2

      When we was building the house we stopped and did 8 foot wide by 9.5 foot tall walls one was hallow block and the other cast. The cast wall took 9 bags of portland mix with a strong mix. The block wall with rendering took 21 bags plus you had to buy block. You make 3 different cement mixes for the hallow block. 1 mix for mortar 1 mix for pouring into the voids in the block 1 mix for rendering. The rendering mix is a lot of portland mixed with fine sand. You have to spend time screening the sand. The rendering cracks from heat because the portland is so strong in it. We cast the wall one morning and it was ready to strip the forms the next day. The hallow block wall was still being rendered 2 days later and was nowhere as nice. Plus still needed to have slots cut in for wiring and plumbing which was more work still. NO COMPARISON.

    • @1rockinthedadbod
      @1rockinthedadbod 13 дней назад +1

      @TexasFilipino Thanks for your reply. I appreciate that. I'll be going with casting.

  • @larryanshelm6100
    @larryanshelm6100 14 дней назад +2

    I’m wondering how thick the outside walls are your perimeter walls of your building they must be 6 or 8 inches thick - 🤔

    • @TexasFilipino
      @TexasFilipino  14 дней назад +1

      4 inches if your talking about this current build project. Engineered strength by knowing how to combine 90 degree walls and T walls to gain massive strength and pour your caps in a soild pour to cap it all off. The load these can carry is amazingly strong. Bigger is not always better ( not what she said LOL) How are you Larry?

    • @larryanshelm6100
      @larryanshelm6100 14 дней назад +1

      @ my wife and I are planning on moving to Quezon province Where are we have 10 hectors , next year full-time and building a new house etc - Your videos are very interesting - you put a lot of thought into your projects. Great work. - We living on Vancouver Island, British Columbia.

  • @HOLLYWOODdaYORKIEandMommyTV
    @HOLLYWOODdaYORKIEandMommyTV 13 дней назад +1

    Can,u give your website in the comments? I can't find it

  • @andrewmcmurray41
    @andrewmcmurray41 14 дней назад +2

    Feet and inches?, bruh 😁

    • @TexasFilipino
      @TexasFilipino  14 дней назад +2

      Yes feet and inches as 80% of my viewers are from North America as am I. Also the Filipinos use both ways.

    • @andrewmcmurray41
      @andrewmcmurray41 13 дней назад +1

      ​@TexasFilipino yeah,I get it,I was a tradie in Australia,plumber,started the trade in imperial then changed to metric,thank christ,its just so much easier and accurate,we still measure surfboards in imperial though, like 6'5"x22"x2 7/8",but the volume in litres 😁

  • @LawrenceWeber-z5o
    @LawrenceWeber-z5o 14 дней назад +2

    over watered mixture and cold joints, the integrity of those walls and the appearance will be crap. of course they will skim coat over that mess to try and make it look good. overtime cracks will appear in those walls. construction practices here in PH are the shits, even the government projects like the MRT extension in Manila. They try to overcome the lousy concrete work by using lots of rebar.

    • @TexasFilipino
      @TexasFilipino  14 дней назад +4

      we can have cold joint on top of these walls. as they are compression joints. My house has been here several years and come walk through it top to bottom and find one single crack or line. Also you need some cold joints for earth quakes. In concrete buildings in earthquake zones you place cold joints for slips. They even sell metal pieces to attach to the end of the walls where they meet to better allow slip. I would have never built this house by their methods as I really don't want to be squished flat while sleeping when a quake comes along. LOL. Yes concrete mix weak with too much water. The rendering they do too will make spider cracks everywhere from mixing heavy portland with fine sand. You can skim ocat and paint them 1000 times and the spider cracks will always reappear. This way avoids all of that.

    • @Rasputin-p4e
      @Rasputin-p4e 14 дней назад

      Shut up. You are a scum. If your allegation is true. We are the most earthquaked and typhooned country in the world, then why there's no bridges or high rise buildings fell in the ground.

    • @Rasputin-p4e
      @Rasputin-p4e 14 дней назад +1

      This man is a joke. Accusing MRT buildings as substandard. Hey, a**h**e!, MRT contractors are the following: Sumitomo Corporation and Mitsubishi Heavy Industries Inc. Do you have any idea who are they? And you, what's yer trade. Are you more knowledgeable than them?

  • @carymukrson2564
    @carymukrson2564 14 дней назад +2

    Remember brother do not become greedy lay off the adds it is your content I came to see I can watch TV to see adds

    • @TexasFilipino
      @TexasFilipino  14 дней назад +5

      RUclips places the ads not me and my endless hours working on this are not free. If youtube put more ads it is because it's popular content. My sponsorship on the motorcycle stuff is a blessing to us as youtube is paying about half what they once did before inflation and saturated market. If you enjoy our content please be happy for us and support us by simply enduring some ads or skip them.

    • @JWDREAM-d3x
      @JWDREAM-d3x 13 дней назад +2

      ​​@@TexasFilipinoI concur absolutely 100% A few ads never hurt anyone if you don't like a ad just skip it simple bless your heart Texas Big Dawg lmao 😉 ❤ PREACH IT PREACH IT!!!

    • @redneckgamer1460
      @redneckgamer1460 13 дней назад

      @carymukrson2564 get RUclips premium if you don't want to watch adds ....that's what I have