How to make you’re own tumbler! Full instructions in pinned comment.Full tutorial on YouTube channel
HTML-код
- Опубликовано: 1 окт 2021
- Want a sparkly tumbler, but don’t want to spend a fortune on one? Well, here you go!! Its soooooo easy!!!!
This one is extremely basic, just to show beginners how easy it is to make your own.
#shorts #DoItYourself #CustomTumbler #DIYForBegginers #YouCanDoIt 
Развлечения
📣📣Instructions:📣📣
I used the following:
Cup turner
30 oz cup from Hogg
Counter Culture Fast Set Epoxy
Glitter of your choice. I used Backfist Custom Glitter’s “Platinum Dust” on my first and last layer of epoxy. I used BCG’s “Hong Kong” on the bottom first layer and Byrdsnest Designs “Hey Beautiful” on the second bottom layer.
Sticker or decal of your choice
1. Spray or paint your cup with your choice of paint. Let dry completely.
2. Mix epoxy using a 1-1 ratio. I use 20mls (10 mls of each) on my first coat. I also added about one teaspoon of Backfist Custom Glitter’s “Platinum Dust” glitter in the epoxy and cover my entire cup. I use Counter Culture DIY epoxy.
As soon as your first layer of epoxy is smooth, but still wet, sprinkle your glitter on the bottom half, while the epoxy is still wet. Use heat gun or torch to pop bubbles. Let dry completely.
3. If your cup isn’t smooth, you can wet sand it. (Sand it smooth while running under water) Let dry completely. If it is smooth, skip this step.
4. Place sticker or waterslide of your choice where desired on your cup.
5. Mix 30 mls of epoxy(15 mls each). I also added another 1/2 teaspoon of platinum dust to my top layer of epoxy for a super sparkly finish.
6. Apply final layer of epoxy using a heat gun or torch to pop bubbles, and let spin until completely dry.
Be sure to use a heat gun or torch to pop the bubbles immediately after applying each layer of epoxy. But, keep the heat moving and don’t let it sit in one place or you will burn your epoxy.
If you have any questions, please leave them in the comments or message me on Instagram or Facebook at Monner’s Market.
Brenda
Thanks will try today and let you know how it turns out!
Hello, I tried to follow the instructions but mine ended up with a lot of dimples. After adding the bottom glitter, I let it spin for 8 hours then added the second coat of resin. Is there any way I can prevent these dimples from happening? Thank you in advance. I love you cup.
@Maranda Faulkner I’m so sorry 😞 I just saw this. You have to make sure your spinner is perfectly balanced.
@ellechim Yes there is. You can go to www.counterculturediy.com and get their “Quick Coat”. It’s a game changer! Here is the link. counterculturediy.com/product/primers/quick-coat-1-oz-sample-size/
I am not an affiliate or paid in any way by them. I’m just a huge fan of their amazing products!! I’ll tag them to see if they may have some extra input.
@counterculturediy #counterculturediy
Thank you 😊
I love it
Thank you!!
I love I’m gonna subscribe
Awwwww I’m so happy to have you!!!
Absolutely amazing Brenda. Love it 🌻💜
That came out awesome!
Thank you! I wanted to do an easy one for people who are just starting out.
Beautiful!!!❤❤❤
Thank you!!🌹🌹
That’s beautiful 💞💞💞
Thank you Gert!! 💖💖
This is so coll, love seeing the process.
This one is extremely basic, just to show beginners how easy it is to make your own.
Awesome! How does one wash this
By hand with warm soap and water.
@@monnersmarket great, thanks!
shut the front door and back while your at it, this was so freakin cool and what is that contraption your using it looks functionally amazing
That is called a cup turner. Epoxy is self leveling, so if you don’t have one you have to constantly spin the cup so that it dries flat and glass-like. They are very easy to make and very inexpensive to purchase. They are a lifesaver!
Amazing short video
Thank you sweetie!!
I am so curious!! Any stickers ?? Love the tumbler by the way!!!
Hey Stacy! If you’re asking if you can use any stickers on a cup, the answer is yes! Let me know if I can help further. 🌹🌹
What products did you use
Wow that is so c,ever ,I'm so glad to see your video I had trouble getting to it I'm not sure if it's a RUclips thing or not ,I'm hoping your all ok too as I haven't seen you put anything up and I miss seeing you craft and hearing you chatting as you craft take care lovely lady all the best Mary in Australia 🌻
I’m finally crafting again! Had to take a couple of weeks off. You’re the best!
@@monnersmarket so glad your back 🌻😘
❤❤
🩷🩷
Are those chemicals safe to use on these types of cups for an at home business? I’m a beginner and want to use a safe good quality product.
Absolutely!! The key is letting it your first coat of epoxy cure for no less than 72 hours before the first use.
Full instructions, please
They are pinned in the comments
Is there a full video on how you did this and the steps you did? I am a beginner and would love to be able to create something like this!
Hey Danielle! Not this one particularly, but there is one similar a few videos down. No one has shown much interest in the cups so I’ve sort of stayed away from that. However, if you want to message me on Instagram I’m very happy to help you in any way I can.
Yeah, I also wanted to learn how to make tumblers like these lol
@BaileyJ28 You can do it!! It’s so easy!
Every time i use spray paint it cracks or bubbles on me.
I would suggest using a high quality paint, make sure you’re shaking it for a long time and use small quit spirts. There are several good RUclips videos on that. Hope that helps. Good luck.
Do you add the glitter then epoxy or the epoxy then glitter? 😊
I mix the glitter in the epoxy. It lays much smoother that way. The full instructions are in a pinned comment.
Hello I want to make my own tumblers and pen . Can u guide me what I need and how to make them . Please and thank you
I sure can! You will need a turner. Epoxy is self leveling so I needs to spin constantly while it’s drying. You will need some epoxy. It’s usually a 1 to 1 mixture of part A and B. Make sure you mix it very well before applying to your tumbler. ALWAYS wear gloves when using epoxy and make sure you are in a well ventilated place. I will come back in a moment and add some step by step videos.
ruclips.net/video/RbKRsovyt6Y/видео.html Also go to my pinned comment for a list of items I used on this cup and step by step instructions.
I want to start making these so bad. But idk if all the material used are toxic for the people.
It can be toxic if you’re not careful. You always need to use gloves and always be in a very ventilated area. A lot of people choose to use a mask when using resin. It is a personal preference. But definitely always take safety precautions. But it is very simple and, very satisfying when you create something that you love.
@Monner’s Market thank you so much for your reply ❤️ i was also wondering, since we are drinking from those, do we use a specific epoxy?
No. Any will do. My favorite is Counter Culture DIY. After 3 days it is cured and very safe to use.
How did you do your wording is that a sticker ?
That one is actually a sticker. Rub on transfers also work really good. They are easier to cover with epoxy.
Wow that looks so easy! You make everything look easily lol. It’s very pretty.
Thank you! It’s super easy!
What are the products you used?
I just saw your message. I’m sorry it took so long to respond.
I used the following:
30 oz cup from Hogg
Counter Culture Fast Set Epoxy
Glitter of your choice
Sticker or decal of your choice
I am doing a video at the end of the week that goes much slower if you are interested in how it all works.
@@monnersmarket what type of spray paint is best
@@christinehairston1833 I like Rustoleum 2X paint personally.
How much do you sell your Cups for
It depends on the design and the size.
When sanding it. My tumbler became dull and lost shine….. how to fix it
Once you get it smooth, and your epoxy dries, you just need to add a light layer of epoxy.
It will shine again on next coat of epoxy
for you just let me now
Let me know exactly what you’re looking for. It’s easier to reach me on Instagram DM. 🌹
what can you do like cow print
@sarahelton6p838p I sure can. I can do pretty much anything you want. Send me a picture on Instagram of what you’re looking for.
ok do you have a k
@@monnersmarket
hey can i have a cup please.
Are you looking to buy one?
yes
@@monnersmarket
Couldn’t see the final cup. Your ad was in the way. Not so good for me.
I've watched it several times to see what you are talking about and there is no ad at the end. Not sure what you are referring to.
and i will have the money
What are you looking for?
cow print @@monnersmarket
ok@@monnersmarket
How much do you want for your cups
It depends on the size, style and location. But generally, a 20oz cup is $45 and a 30oz cup is $55. You can dm me on Instagram for a private message if you would like. (Brenda)
@@monnersmarket ok do you now have were Sebring Is
The one in Florida near Avon Park?
Can you give one a little bit lower
What do you mean?
this is a lot of chemicals
Yep! But, once it cures it very safe.