@@vigotogar Yes it does when he is putting this much work into making it perfect. Balancing the wires helps(along with the lubing) eliminate any of the rattle that might happen when keys are pressed.
@@vigotogar I have not personally done it but I have typed on a board that has. I can not give you a concrete yes as there is more than just 1 factor to that. The lupe, balancing, quality of stabilizer all matter.
Hi, new to mech keebs Q: What are you doing to the battery at 1:07? Q: How do you know where to cut the stabalizers? Q: Whats going on at 4:17? Thanks!
@@3ildcat ur my 1st keyboard mod channel i watched, im basically new to this but what's the ratio in the 1st krytox mix or is it the same in the 2nd one you mixed?
@@alyzzagailmicabalo2385 krytox 205g0 is basically 205g2(or normal 205) mix with 30%-40% 105, personally speaking the viscosity is similar, and he adding 1:1 ratio of krytox 205g0 and 105 into his 205g0 + 105 mix so make the ratio of dilute effectively into a 70%ish 105 and 30%ish 205g2 mix which is more liquid like and easier to use edit: the one he use for stabilizer is different kind of lube edit 2 : you can treat the 70% 105 and 30% 205 as 205g00 which is thinner lube than 205g0 but still a grease which will stick to the surface instead of and oil which will sink into the bottom housing over time
After binge watching a lot of your videos, I've finally decided to get myself a mechanical keyboard! I want to start with the Kemove snowfox for the bluetooth and hot swappable feature which would be a good way for a beginner like me to explore. Like your modded womier video, I hope to mod it with the pom jelly caps and holy panda switches one day! Do you think this is a good start 😊?
I just got this keyboard today after seeing your video, wow this keyboard feels amazing. I'm still not used to the arrow keys but the brown switches it came with sounds so nice, I don't think I need to lube it. Also the spacebar on mine is perfectly fine, the only button that has a little rumble on mine is the backspace. I have bought quite a few keyboards over the past few days but this one has been by far the best to type on. Not sure if its the switch or the keys. Ughh if only they came out with a 87 key version of this!
Finally!! Waited for this, ordered the same keyboard because of your video! :D And do you think I should spray lube, cause I never lubed any switches (I never opened one). Maybe spray lubing might be better for an newbie? (BTW. I'm "Sasuke Uchiha" from the other video, maybe you remember me :) )
Aha you changed the name! It's totally up to you. If you want to spray lube, shake well before applying and if you can, pull the switch out first. That would be better for keeping the plate clean.
@@3ildcat okey thank you! No this is just my first account :3 I have a non used keyboard which is, for some, hottswap, so I would use that board for the spray lubing so the plate won't get dirty :D
@@ryan9818 Not who you were asking, but I also recently just got this keeb. This is my first keyboard, and its a great prebuild for beginners from what I can tell. The factory lubing is pretty good, and the build is sturdy. I plan to replace the keycaps soon because the ones that come with it are a little bit ugly. I don't really have any complaints for this board, so I would definitely recommend it for those who don't want to heft out the price for a custom.
3 года назад+1
@@ryan9818 Got it yesterday. Mine came with 5pin hotswap instead of 3pin. Works great so far. Software is in beta and buggy. This is only my second mechboard so im not the most xp guy with these keyboards, but i really like it. It is very satisfying to type on compared to all my previos keyboards that is for sure.
It's Doro desk mat. (in the description) As I am not Chinese, I used a freight forwarder. Sadly hard to get.. item.taobao.com/item.htm?spm=2013.1.20141001.1.6d7a252a74Xs97&id=587143973122&scm=1007.12144.95220.42296_0_0&pvid=a6292b85-ea22-4a8a-8a75-6457bf41e623&utparam=%7B%22x_hestia_source%22%3A%2242296%22%2C%22x_object_type%22%3A%22item%22%2C%22x_mt%22%3A0%2C%22x_src%22%3A%2242296%22%2C%22x_pos%22%3A1%2C%22x_pvid%22%3A%22a6292b85-ea22-4a8a-8a75-6457bf41e623%22%2C%22x_object_id%22%3A587143973122%7D
After weeks of searching for kits, most of the good ones are sold out or are super delayed shipping, I nearly pulled the trigger on some that weren't as versatile as this one. Once this one stumbled into my vision, I was surprised that it met nearly every aspect I wanted, and was willing to pay considerably more for just a kit with more limitations before. I bought this one in a heartbeat. I don't plan on doing too much mod work, but the possibilities are clearly there. And the base you get is superb on its own.
Gonna do this once my K6 arrives, although it looks like it’s gonna be a hot minute. Also, do you always mix the two lubes for the switches, and use a separate lube for the stabs?
I ordered this keyboard then during processing, the company said they were out of stock of SnowFoxes ._. :3ildcat did you buy their entire inventory right then? hahaha
actually this was way before you posted the last vid. so idek how it happened xD I thought it was weirdly underrated since it was both great at Hot-swap and the RGB software from Kemove is really good. and then of course lots of new unboxings of it cropped up ^^"
I live in Brazil and I just bought this board. I'm looking for alternatives for the krytox lube that are more easily purchasable. I'm able to buy even if I'm willing to import. The dielectric grease for the stabs is ease to found, but I'm out of luck when it comes to lubing my switches.
Yeah, I found some even locally but the cost is just nuts... They are overcharging by a lot here. I will follow some recommendations that I found about using super lube synthetic grease and oil.
Wow, conocí este canal y me ha encantado, definitivamente quiero comprarme ese teclado, pero para hacer el mod no sé dónde conseguir los productos que usas, (más que todo las 'cremas' o suavizantes)
I wish he would sell the modified KEMOVE 61 cuz I do not know how to mod to save my life. (Foetus in the mechanical keyboard world here, all I have is an RK71 and only looking for keycaps to have a more thockier sounding keyboard, which obviously won't work)
One major flaw, please don't do it again, do a sound test before modding! Then play a 10 second verdict between the sounds at the end, thank you. Edit: LMAO you did afterwards, thanks!
This video is truly amazing. This is a master class in keyboard modding. Thank you for the incredibly high quality videos that explain in just a few minutes what would take hundreds or thousands of words in an article of how-to. Keep up the incredibly high content. Absolutely crushing it!
Hi Wildcat! Can I ask a question? Is it necessary to add band aid to the PCB? What is the main reason people does that? Will it benefit me in making the stab sound much better? Looking forward for your reply! Thanks for putting out such great content! Cheers 🥳
Honestly, i feel that down to preference that is a tad too much lube, i've only ever lubed a keyboard once but even when i did i've never seen anyone lube this much and in this way, surely the typing felt mushy? or was it smooth, just asking because in the second typing test i could hear some like 'lube' sounds idk and they just sounded kinda mushy.
Hello can you tell if the macro and remap configuration of the keys is saved on the keyboard to use on bluetooth? Or does the software only work with cable losing the configuration on bluetooth? I want to use the keyboard only with bluetooth on the company's notebook and I wanted to have the key maps configured on bluetooth! Thanks if you can answer, I research it but I can't find the precise information, sorry not native english.
지금 앤프로2를 사용 중인데 kemove61로 넘어갈까 생각 중입니다. 블루투스 5, 더 큰 배터리, 그리고 hot swappable이 맘에 들고 무엇보다 약 20불정도 저렴하네요. 앤프로2를 환불할 수 있어서 넘어가려고 하는데 와캣님의 생각은 어떠신지요? 간헐적으로 앤프로2가 끊기는것도 약간 거슬리네요. 영상 항상 잘 보고 있습니다 :)
블투가 끊긴다면 환경적인 이유로 다른 블투도 끊길 수도 있어서 그부분은 넘어가고, 큰 배터리나 디자인, 핫스왑이 더 맘에 드신다면 괜찮을 것 같습니다. 개인적으로 앤프로1&2 외에는 무선 키보드들 다 별로 안좋아하는데 키무브 만큼은 포장부터 제품퀄까지 생각보다 괜찮았습니다. 무선기능은 앤프로나 키무브나 영상용으로 외에는 잘 안쓰는 기능이라 따로 말씀드릴게 없네요..
I watched it without breathing whooa! What a long journey to get a fancy keyboard sound. I'd like to customize my keyboard someday and i know it won't happen😏 한글 타자 치실 때 묘하게 빠르고 강해지는 거 저만 웃긴가요 역시 빨리빨리 민족ㅋㅋㅋㅋ ㅋㅋ
Could I do it on every keyboard to make same improvement (especially for those large key) like yours? Im using the Razer blackwidow v2 TE (I know the quality is way worse) right now, but I just love the feeling on the yellow switches.
I love the intros so much, I don't know who in their right mind would skip them!
@Naoto ;-;
I just want to see his insane typing skills
@Naoto what a psychopath omg
me
best intros in all of youtube.
Everybody gangsta till he starts typing in Korean
KamilxHueHue stfu stolen
Rizzy Playzz its not stolen one person comments it every vid
The Korean Taeha Types
..oh wait
lol
lol
lol
lol
lol
Imagine how many keyboards this guy just has laying around his house
Wildcat: Let’s mod the Kemove 61 SnowFox
Literally rebuilds the entire keyboard.....
How fast can you type in Korean?
Wildcat: YES
Oh :3ildcat lemme ask, is your typing fast among Koreans or is it just us English noobs who are slow?
he's fast
don't lump me in with the slow typers I type at a consistent speed of 2 wpm
Im fast as fuck boyyyy
I am not sure
I think just a bit faster than average?
:ooo I finally got a heart. -crys in english-
I love how he uses an iphone to balance the wires
does balancing the wires matter?
@@vigotogar Yes it does when he is putting this much work into making it perfect. Balancing the wires helps(along with the lubing) eliminate any of the rattle that might happen when keys are pressed.
@@keeperkell13 have you done it? if so, does it eliminate the "ping" sound while tapping it lightly?
@@vigotogar I have not personally done it but I have typed on a board that has. I can not give you a concrete yes as there is more than just 1 factor to that. The lupe, balancing, quality of stabilizer all matter.
@@keeperkell13 oh i see okay thanks!
The "after" sounds really, really nice.
I just ordered this keyboard and definitely will do these mods if it makes it sound good.
I do wish he had done a sound test before he modded it.
@@stopthephilosophicalzombie9017 He did, check the description.
@@TheChadillac My bad.
Me: Hey I kinda want that keyboard
My money: No u
sum cheaper one's on amazon & banggoods (hope you're ready to wait a month) but their are cheaper options out!
It’s a not funny joke
@@M4TTYN Oooof a month?!
rk61 is a good, cheap choice (AU$70 on Banggood)
@@ingalam2893 who asked?
I wanna customize my own keyboard so bad lol
Which Keyboard is it?
@@ewoenam9919 I mean like pick out all the parts myself so its fully customised how i like it lol
@@notkyruto same same
@@Dubufy i was asking him which keyboard he had silly
@@Dubufy oof
This is sick! I really like these modding pre-built videos. Keep it up!
Hi, new to mech keebs
Q: What are you doing to the battery at 1:07?
Q: How do you know where to cut the stabalizers?
Q: Whats going on at 4:17?
Thanks!
1. Just looking around
2. Pause 1:43 and look carefully
3. Because of the big front bumps, hard to use the opener
:3ildcat thank you :)
@@3ildcat ur my 1st keyboard mod channel i watched, im basically new to this but what's the ratio in the 1st krytox mix or is it the same in the 2nd one you mixed?
@@alyzzagailmicabalo2385 krytox 205g0 is basically 205g2(or normal 205) mix with 30%-40% 105, personally speaking the viscosity is similar, and he adding 1:1 ratio of krytox 205g0 and 105 into his 205g0 + 105 mix so make the ratio of dilute effectively into a 70%ish 105 and 30%ish 205g2 mix which is more liquid like and easier to use
edit: the one he use for stabilizer is different kind of lube
edit 2 : you can treat the 70% 105 and 30% 205 as 205g00 which is thinner lube than 205g0 but still a grease which will stick to the surface instead of and oil which will sink into the bottom housing over time
@@get_troll thanks i understand a lot!
Something about this, is so, Aesthetically Pleasing....
Each video is more amazing than the last !
Thank you
Idea for the future: A case swap with a metal one
Thanks from germany
Damn, you have beautiful hands, it's so mesmerizing to watch these videos
Everybody gangsta till :3ildcat starts typing in Korean
After binge watching a lot of your videos, I've finally decided to get myself a mechanical keyboard! I want to start with the Kemove snowfox for the bluetooth and hot swappable feature which would be a good way for a beginner like me to explore. Like your modded womier video, I hope to mod it with the pom jelly caps and holy panda switches one day! Do you think this is a good start 😊?
Whenever you are satisfied, who can say it's not good? :3
저 타자 연습 프로그램은 뭔가요??
What's the name of the typing practice program?
설명란에 타이핑웍스 입니다.
OMG I want to buy one of your keyboards your work its amazing
The after typing sounds were like straight up ASMR for me. I could listen to that for a while.
The production quality on this channel is just top notch.
I just got this keyboard today after seeing your video, wow this keyboard feels amazing. I'm still not used to the arrow keys but the brown switches it came with sounds so nice, I don't think I need to lube it. Also the spacebar on mine is perfectly fine, the only button that has a little rumble on mine is the backspace. I have bought quite a few keyboards over the past few days but this one has been by far the best to type on. Not sure if its the switch or the keys. Ughh if only they came out with a 87 key version of this!
Nice!
No dislikes yet!!
Finally!! Waited for this, ordered the same keyboard because of your video! :D And do you think I should spray lube, cause I never lubed any switches (I never opened one). Maybe spray lubing might be better for an newbie? (BTW. I'm "Sasuke Uchiha" from the other video, maybe you remember me :) )
Aha you changed the name!
It's totally up to you.
If you want to spray lube, shake well before applying and if you can, pull the switch out first.
That would be better for keeping the plate clean.
@@3ildcat okey thank you! No this is just my first account :3 I have a non used keyboard which is, for some, hottswap, so I would use that board for the spray lubing so the plate won't get dirty :D
YES this is my keyboard!!
I got this keyboard after watching this video.
@@gamerman708 how was it?
@@ryan9818 Not who you were asking, but I also recently just got this keeb. This is my first keyboard, and its a great prebuild for beginners from what I can tell. The factory lubing is pretty good, and the build is sturdy. I plan to replace the keycaps soon because the ones that come with it are a little bit ugly. I don't really have any complaints for this board, so I would definitely recommend it for those who don't want to heft out the price for a custom.
@@ryan9818 Got it yesterday. Mine came with 5pin hotswap instead of 3pin. Works great so far. Software is in beta and buggy. This is only my second mechboard so im not the most xp guy with these keyboards, but i really like it. It is very satisfying to type on compared to all my previos keyboards that is for sure.
@ Thank you for the info. I might get the GMMK white ice maybe.
But..finally how many keyboard do you have..
I need to get some of this modding gear. That slider picker and lubing station look amazing!
와 벽긁는소리 사라진거 대박이내요ㄷㄷㄷ
차이 미쳤다ㄷㄷㄷ
게적순정은 못들어줄 정도내요;;
Noce build.
Can't believe this video will turn 2 years old in May
why havent u blown up already.... u produce incredibly high quality content
That spacebar is so sad even after lubing
You think so? I thought it sounded pretty good after the lubing!
Do they all sound like this? I noticed this in other reviews of the keyboard, it has a rattle/scratching noise.
Which keyboard would you prefer This or the Anne pro 2?
Nice video! Btw where can I buy that mousepad it’s pretty cool
It's Doro desk mat. (in the description)
As I am not Chinese, I used a freight forwarder.
Sadly hard to get..
item.taobao.com/item.htm?spm=2013.1.20141001.1.6d7a252a74Xs97&id=587143973122&scm=1007.12144.95220.42296_0_0&pvid=a6292b85-ea22-4a8a-8a75-6457bf41e623&utparam=%7B%22x_hestia_source%22%3A%2242296%22%2C%22x_object_type%22%3A%22item%22%2C%22x_mt%22%3A0%2C%22x_src%22%3A%2242296%22%2C%22x_pos%22%3A1%2C%22x_pvid%22%3A%22a6292b85-ea22-4a8a-8a75-6457bf41e623%22%2C%22x_object_id%22%3A587143973122%7D
After weeks of searching for kits, most of the good ones are sold out or are super delayed shipping, I nearly pulled the trigger on some that weren't as versatile as this one. Once this one stumbled into my vision, I was surprised that it met nearly every aspect I wanted, and was willing to pay considerably more for just a kit with more limitations before. I bought this one in a heartbeat. I don't plan on doing too much mod work, but the possibilities are clearly there. And the base you get is superb on its own.
What did you buy from the kit? I see a couple listed, but is the grease the only thing you need?
Gonna do this once my K6 arrives, although it looks like it’s gonna be a hot minute. Also, do you always mix the two lubes for the switches, and use a separate lube for the stabs?
not always
you will know if you watch my other mod videos.
Just testing new type of krytox mix.
Omg i've been waiting for this since I just got myself and my brother this keyboard. Thanks so much!! I ordered because of your previous video!
Can i mix GPL205 G2 with GPL105 G0 for lubrication of switches?
last time, I used them.
is there a diffrence between Krytox 205g0 and Krytox 205g0 10g
Its just the amount i think
didn't know balancing stab wires is a thing until this video.. question, which point did you make the pressure to balance it?
just by twisting wire legs little by little
@@3ildcat nice!
What is the side mounted cup/bin you use?
I ordered this keyboard then during processing, the company said they were out of stock of SnowFoxes ._.
:3ildcat did you buy their entire inventory right then? hahaha
That's sad.
I think many people bought it from the last video.
actually this was way before you posted the last vid. so idek how it happened xD
I thought it was weirdly underrated since it was both great at Hot-swap and the RGB software from Kemove is really good.
and then of course lots of new unboxings of it cropped up ^^"
Amo tus vídeos 😍😜
rewatching your old videos! glad to see the improvements compared to your new ones ♡
2:03
Using old Iphone for... Balancing wires, huh? :P
what does balancing stabs do anyway?
Dude I watched the intro like four times...that’s bad ass! LOL it’s the little things in life you know? Pun intended
It seems so much easier modding hotswap keyboards than desoldering
I live in Brazil and I just bought this board.
I'm looking for alternatives for the krytox lube that are more easily purchasable. I'm able to buy even if I'm willing to import.
The dielectric grease for the stabs is ease to found, but I'm out of luck when it comes to lubing my switches.
On google, you can find many stores that ship internationally
krytox or tribosys
Yeah, I found some even locally but the cost is just nuts... They are overcharging by a lot here.
I will follow some recommendations that I found about using super lube synthetic grease and oil.
@@reisnobre olá, onde vc achou ambos? dielectric grease e o krytox? eu também estava procurando algo parecido por aqui no brasil mas não achei nada...
6:10 why didn't you add any foam? you usually do it, is it not needed on the snowfox?
It's just an option so just tried without foam
do more womier k66 vids
Wow, conocí este canal y me ha encantado, definitivamente quiero comprarme ese teclado, pero para hacer el mod no sé dónde conseguir los productos que usas, (más que todo las 'cremas' o suavizantes)
es grasa dielectrica,loprimero, el krytox si es especial para teclados pero cuesta bastante
@@jaiversalazarortiz779 Muchas gracias amigo
I wish he would sell the modified KEMOVE 61 cuz I do not know how to mod to save my life. (Foetus in the mechanical keyboard world here, all I have is an RK71 and only looking for keycaps to have a more thockier sounding keyboard, which obviously won't work)
One major flaw, please don't do it again, do a sound test before modding! Then play a 10 second verdict between the sounds at the end, thank you.
Edit: LMAO you did afterwards, thanks!
This video is truly amazing. This is a master class in keyboard modding. Thank you for the incredibly high quality videos that explain in just a few minutes what would take hundreds or thousands of words in an article of how-to. Keep up the incredibly high content. Absolutely crushing it!
Hi Wildcat! Can I ask a question?
Is it necessary to add band aid to the PCB? What is the main reason people does that? Will it benefit me in making the stab sound much better?
Looking forward for your reply! Thanks for putting out such great content! Cheers 🥳
Honestly, i feel that down to preference that is a tad too much lube, i've only ever lubed a keyboard once but even when i did i've never seen anyone lube this much and in this way, surely the typing felt mushy? or was it smooth, just asking because in the second typing test i could hear some like 'lube' sounds idk and they just sounded kinda mushy.
That Intro is wonderful! I love your videos, keep up the amazing work!
Thank you so much!
The wandering use enthrallingly develop because root reassembly unfasten a a adjoining drizzle. thoughtless, instinctive stone
Thanks
Hello can you tell if the macro and remap configuration of the keys is saved on the keyboard to use on bluetooth? Or does the software only work with cable losing the configuration on bluetooth? I want to use the keyboard only with bluetooth on the company's notebook and I wanted to have the key maps configured on bluetooth! Thanks if you can answer, I research it but I can't find the precise information, sorry not native english.
Whats the benefit of the krytox mix? I planned to use 105 for springs and 205 for switches
지금 앤프로2를 사용 중인데 kemove61로 넘어갈까 생각 중입니다. 블루투스 5, 더 큰 배터리, 그리고 hot swappable이 맘에 들고 무엇보다 약 20불정도 저렴하네요.
앤프로2를 환불할 수 있어서 넘어가려고 하는데 와캣님의 생각은 어떠신지요?
간헐적으로 앤프로2가 끊기는것도 약간 거슬리네요.
영상 항상 잘 보고 있습니다 :)
블투가 끊긴다면 환경적인 이유로 다른 블투도 끊길 수도 있어서 그부분은 넘어가고,
큰 배터리나 디자인, 핫스왑이 더 맘에 드신다면 괜찮을 것 같습니다.
개인적으로 앤프로1&2 외에는 무선 키보드들 다 별로 안좋아하는데 키무브 만큼은 포장부터 제품퀄까지 생각보다 괜찮았습니다.
무선기능은 앤프로나 키무브나 영상용으로 외에는 잘 안쓰는 기능이라 따로 말씀드릴게 없네요..
I think I would need to open up my $40 dollar Drevo Grammer 84 keyboard and lube it. A lots of de soldering.
That's possibly the worst stock spacebar I've ever heard, definitely worth the mod
I watched it without breathing whooa! What a long journey to get a fancy keyboard sound. I'd like to customize my keyboard someday and i know it won't happen😏 한글 타자 치실 때 묘하게 빠르고 강해지는 거 저만 웃긴가요 역시 빨리빨리 민족ㅋㅋㅋㅋ ㅋㅋ
The slide picker is actually a metal clutch pencil :)
The sounds of the BEFORE typing test literally made me cringe.
항상 잘 보고있어요!! 다음 영상 기다립니당☺️
Help! Kemove snowfox 61 or Gamakay tk68 ? Thanks c:
this or a custom hotswap build? its cheaper to get this and swap switches/keycaps but quality/UX wise i feel a custom?
Do you now do youtube fulltime?
I think so
Excellent video, thank you!
Is mixing the lube better than just using 205g0?
not better or worse
just 'different'
Where can I buy these keyboards from?
PS - I am from India.
Could that plate be replaced with one of another material? Can't find any with matching stand offs. Would it be so bad to leave the plate floating?
What are you clipping off and why? First time with my keyboard and trying to find out how lub - mod it
Awesome video thanks! Also what tape do you use for the stabilizers?
I wish i wold know how to do in mine Snowfox!
I dont have all the patience u do!
Does dk61 bluetooth automatically reconnect after the keyboard going into sleep?
Click any one key, Bluetooth will reconnect automatically
what type of foam do you use?
sponge foam
how does one call the little thing by your desk at 0:24? looks so handy >_
I’m sad bec I don’t have a mechanical keyboard and my mom does not want to buy me one :( I’m the saddest person in the world :(((
What is your favorite keyboard??
space65
@@3ildcat yeah is the BEST
How can the sound change that much having the same switches??!!
Why do you clip the black pieces at 1:30? Thanks for all the great content!
1:35 저기는 왜 자르는건가요?
그리고 혹시 풀윤활하시는데 얼마나 걸렸는지 알 수 있을까요?
저 튀어나온 부분이 pcb를 건드리면서 깔끔하지 못한 소리를 냅니다. 저렇게 잘라주면 해결됩니다.
도구나 숙련도에 따라 시간편차가 제법 있습니다. 예전에는 4시간 넘게 걸렸는데 요즘엔 1~2시간 안에 끝냅니다.
This what im waiting for 😍 always satisfied with the result. Maybe you wanna try tecware phantom elite tkl next?
can i use krytox 205g0 for everything in this video?
Hey wildcat! What are your thoughts on orings?
I tried in the past, never use again.
I can use Halo clear in this keybord?
yes
@@3ildcat thx
ive heard about buying plate mounted stabilizers, but i dont know if buying those or doing what you do in the vid is better?
8:58
"Practice makes perfect"
The main difference for me was the space bar, Jesus Christ that thing went from a rattly horrible mess to the deepest and smoothest thing ever wtf 😭
I don't need this! I have an Anne Pro 2.
.
.
...But I really want it.
is modding the stabs still necessary with the new yellow stabs of kemove?
Me : hey I wanna try modding my keyboard
Keyboard : *don't touch me*
:3ildcat, Id love to see you mod a ducky one two mini, just a suggestion!
Anyone ever use keg lube on the stabilisers? It's food safe and won't eat away at the rubber.
Bought this as a tester couple weeks back. Not that bad.
Could I do it on every keyboard to make same improvement (especially for those large key) like yours? Im using the Razer blackwidow v2 TE (I know the quality is way worse) right now, but I just love the feeling on the yellow switches.
maybe? you may need to apply according to your keyboard structure