ME TOO!!! LOLIt has a little gold piece on the front of the fuel solenoid that im guessingnis for fuel pressure with a built in filter? No instructions included with the kit 😅🤣🤙
The carbs gravity fed, so sucking fuel from the filler cap isnt that stopping the flow of fuel down to the carb? I know that on my quad i had a faulty one way valve on the overflow pipe and it wouldnt feed the carb until it was removed. Just an idea
Darren also the carb is still getting its fuel from the petcock, i havent changed any of the stock setup, the fuel pump routed through the top is just for the nitrous solenoid setup
Yea it does seem starved for fuel..but I can't tell without being there & riding it, or really rich like you said...yea it could be getting liquid from that bottle too..you'll get it bro!👊 Good job with hooking it up 👍 we all rootin for ya 👊 even the dog looked excited!!
You should try do some gusset bit to make your frame more stronger and some decent paint job on frames,swimgarms,a-arm,rims, front bumper and rear grab bar and nerf bars that be so awesome project cheers
Gotcha! Thanks for the feedback. I need to know how much pressure we have first, definetely think theres an issue between that n the cold 👊🤙 thanks for the feedback bro
I could easily turbo it but finding an oil feed line may be challenging. Honest to god i had a free turbo i was supposed to pick up and it just never went down yet
Hot is lean but you should measure the exhaust temps to be sure or do a plug read. As for the reserve piece i would say sounds lile the petcock is clogged!
Well the reserve and the on both have the same flow so the gas cap shouldnt affect one and not the other. 1 time i had the filter on the on side of the petcock sort of melt from gas because it was cheap china made and when i removed the filter it worked fine. Just a thought ✊👊
Stupid Fast okay I’m going to check that and I was thinking it’s was the gas cap because yesterday I could Hear the pressure release form the cap and today I couldn’t hear it
Watch grind hard plumbing they have built some crazy mini jeep with crf450 motor in and they are so awesome to see them it's best build the way the size of power wheels it's so crazy
@@StupidFastJohn I was hoping you would atleast get it working with 10hp shot before it shits the tin 😂 I wanna see the rod out the side of the case as much as you 😂
Good idea! I think the bottle pressure was super low but i dont have a gauge on it yet to verify which if it were low then the nos wont turn from a liquid to a gas and wont come out of the bottle
@@andychapman6646 no but the thought crossed my mind! Once i check bottle pressure and get it warm enough if current setup doesnt work that will be next!
Lmfao 👊 peeps like you make me want to keep making vids, i have slowed down while trying to get my shop in order for winter but VERY SOON i will be back at it full time again more then ever!!!
Y did y mount it on the “Bumper” come on
Alwaya tryinf diff mounts
Can’t wait to see this go pop! Lol.
Sounds like it’s flooding out. Is the fuel pressure regulated or just whatever that little pump can throw at it?
ME TOO!!! LOLIt has a little gold piece on the front of the fuel solenoid that im guessingnis for fuel pressure with a built in filter? No instructions included with the kit 😅🤣🤙
The carbs gravity fed, so sucking fuel from the filler cap isnt that stopping the flow of fuel down to the carb? I know that on my quad i had a faulty one way valve on the overflow pipe and it wouldnt feed the carb until it was removed. Just an idea
I took the gas cap valve out and drilled a few small 1/8 inch holes in the top to relieve the pressure. Should be enough? 🤙👊
Darren also the carb is still getting its fuel from the petcock, i havent changed any of the stock setup, the fuel pump routed through the top is just for the nitrous solenoid setup
Yea it does seem starved for fuel..but I can't tell without being there & riding it, or really rich like you said...yea it could be getting liquid from that bottle too..you'll get it bro!👊
Good job with hooking it up 👍 we all rootin for ya 👊 even the dog looked excited!!
You should try do some gusset bit to make your frame more stronger and some decent paint job on frames,swimgarms,a-arm,rims, front bumper and rear grab bar and nerf bars that be so awesome project cheers
Youll get it. Check the solenoids sometimes they get stuck closed. I even seen clogged nitrous jets from factory.
Gotcha! Thanks for the feedback. I need to know how much pressure we have first, definetely think theres an issue between that n the cold 👊🤙 thanks for the feedback bro
whats the part number on the kit? Thanks an advanced.
The nitrous kit?
Can you turbo it?
I could easily turbo it but finding an oil feed line may be challenging. Honest to god i had a free turbo i was supposed to pick up and it just never went down yet
New sub here, what do u do for a living/work?
I am an engineering technician for reynolds in the hefty division. Tx for subbing man! 👊🤙
Yo I got a 2020 250cc yesterday but now it won’t run unless it on reserve what can it be?? And is it normal if it gets really hot??
Hot is lean but you should measure the exhaust temps to be sure or do a plug read. As for the reserve piece i would say sounds lile the petcock is clogged!
Stupid Fast I doubt the peacock is clogged because it brand new I was thinking it might be the gas cap but I’m not sure
Well the reserve and the on both have the same flow so the gas cap shouldnt affect one and not the other. 1 time i had the filter on the on side of the petcock sort of melt from gas because it was cheap china made and when i removed the filter it worked fine. Just a thought ✊👊
Stupid Fast okay I’m going to check that and I was thinking it’s was the gas cap because yesterday I could Hear the pressure release form the cap and today I couldn’t hear it
Stupid Fast it’s fixed I had put a vent line that wasn’t letting air flow and when I removed it today it started working fine
hahaha xD dont blow it up! xD we wanna se you do more sick things with that quad. maybe turbo next with nitrous? xD would be epic xD
LOL but i have an epic build i want to get started on😅😅😅👊🤙
@@StupidFastJohn gogo boom it is! xD
@@jurg1bye65 trust me brother when you see the next project its def worth it!!! 👊😅😅😅
You deserve more subs nice edits
Thank you Connor! Appreciate it man 👊🤙
I have a Chinese ATV and I'm having problems with my harness wiring 😢 I'm in Lowell Massachusetts I heed a mechanic.
Best way to heat a bottle fast is with a propane torch.
Watch grind hard plumbing they have built some crazy mini jeep with crf450 motor in and they are so awesome to see them it's best build the way the size of power wheels it's so crazy
I watch em all the time brotha' 👊
Great sound track!
Thanks man 🙏👊
Either your nos solenoid isn't kicking on or you have way too much fuel going in @ WOT.
Yup agreed! Think it was because the bottle pressure was low so it may have not been putting any nos in
@@StupidFastJohn Better that way around than all nos and no fuel 😱 and detonating your engine.
But i wanna blow it up 😅😅😅😇
@@StupidFastJohn I was hoping you would atleast get it working with 10hp shot before it shits the tin 😂
I wanna see the rod out the side of the case as much as you 😂
Nice car and truck and bikes
Adjust main jet to let more fuel an nos in at same time an half choke the carbi.
Good idea! I think the bottle pressure was super low but i dont have a gauge on it yet to verify which if it were low then the nos wont turn from a liquid to a gas and wont come out of the bottle
Yep that's right I'm uploading a video today I will explain it all in the video
Awesome vid
Is it Noss or N.O.S.
Its NOSSSS! 👆 RUN!
you need top gear ful rpm them you squeeze the gas bro
Lol im with yah man! Seriously
What’s the name of the quad
Honestly i have no idea lol o never figured it out! I just know its a 250cc i think its a honda replica motor
awesome video
Just spray it into the air intake
Thats what it is doing the nozzle is right behind the carb 👊🤙
@@StupidFastJohn ya but I think it's the extra fuel that's flooding it. Did u try just NOS with just it's normal fuel intake?
@@andychapman6646 no but the thought crossed my mind! Once i check bottle pressure and get it warm enough if current setup doesnt work that will be next!
link to the kit?
Good job 👍 you'll get it bro!!👊
Shit yah we will! Jusy gotta get that bottle warm! 👊🤙
Tao Tao, best quad ever made 🤦♂️
If it takes that nitrous it is 🤣👊🤙
can still make your shitty ass grizz catch a lane homie 😂🤣🤣🤣💯
@@edwino.3490 Not my Grizz. You must have a Tao Tao...
@@mikelwmc tao tao on a swapped motor running on nos ain’t nothin compared to a grizz my g 🤣
and that tao tao i don’t even use g i got a drag banshee that’s being built rn 😂
Nice lift
She don't wanna die lol
Ikr!!! Im all like 😈😈😈 n shes all like 😇😇😇
Needs a carb
Or like the Brand
Intro was too long. I couldnt watch the whole video
Sounds Like its flooding!!
Yea thats what i thought too
When you tear up this engine ca. I have it lol
Lol!
@@StupidFastJohn can i though
Where u located?
@@StupidFastJohn TX
Oh wow, lol thats a bit of a drive for a chinese engine?
Nitrous Sniffing pitbull
Thats wat i hope the end result is lolll 👊🤙
Im back :)
Lmfao 👊 peeps like you make me want to keep making vids, i have slowed down while trying to get my shop in order for winter but VERY SOON i will be back at it full time again more then ever!!!
@@StupidFastJohn ill be watching 👊
First
Ahhhh shitttt 👊🤙 timm-ay commin in for the kill 👌💪🤘
👎👎👎👎👎👎👎👎👎👎👎👎👎👎👎👎👎👎👎👎
Awesome vid
Awesome vid