*_The reveal of the final product is 30sec too short-at least, we hardly get to see the end result!?_* *_And what's with the skull graphics in the middle of the shot?_*
Looks so good, I need to upgrade my Photon Mono to something bigger lol. What do you use to gap fill things like the gap between the horse head and the body, or the gap in the cloak on the rider?
I'd assume they probably either resin welded the parts with UV resin, or they used epoxy or putty. I know my favorite method is resin welding so as to not lose detail
I spent almost a month printing this and close to $200 in resin, if i remember correctly, making this model. Very upset with it. The horse and rider are very top heavy and only 2 points of contact to hold it to the base. Turns out this problem has been known for several years, and nothing has been done to address this. I now have a model that is in several pieces because it fell over and broke. For a 12 month loyalty reward this should be fixed. This is far too beautiful of a model to have an issue like this. And as always Marcia, your an incredible artist, phenomenal paint job.
HAAAAAAAAAAAAAAAAAAAAAAAAAAAAA GRANDE LIND0 EU QUER0000, minha impressora vai levar um mes ou mais, e so de resina e pintura adeus vida social $$$$, mas quem liga!!?
Amazing! I love the models you guys make they look so damn good and the faces!! are great many model makers even pros cant get faces right as they are very complex.
guys i just watched a resin printing introduction video you did 2 years ago recommending a phrozen 4k, i would love to hear what you would recommend in the middle range of resin printers today ,. I was thinking of a jupiter2 but would gladly hear even more details like the issue of some printers being locked to subscription for slicers vs open source, what resin to choose etc. Many thanks in advance. Regards/Ed
Is it possible to request your team for a figure that originally was a minuter figure into a large one with beautiful coloring and detail 🙏 if not do you know someone or a company that will?
Não vou mentir, achei estranho a cabeça da moça saindo da traseira do cavalo na imagem final 🤣. Mas tanto o modelo quanto a pintura ficaram fantásticas, o trabalho de vocês é maravilhoso! Parabéns.
Not sure how your prints are coming out so beautiful keep it coming!!!! I’ve been trying to print large prints with siraya tech navy grey normal exposure 1.5s and bottom exposure 40s and they won’t stick to supports but small prints come out perfect
👉SUBSCRIBE NOW and start printing, painting, and playing!
bit.ly/3CwElcI
Marcia is such a amazing painter always brings the teams prints a new life, great job as always Loot..
*_The reveal of the final product is 30sec too short-at least, we hardly get to see the end result!?_*
*_And what's with the skull graphics in the middle of the shot?_*
How much does it cost?
Where can I buy such things?
Amazing model!!!!
Way too short for a good appreciation of the final result
Ok, game on!
Now we need the how to paint this video!
😁
Nice job👍I know how much work and effort has been put into this. Good job!🥰👌
Printer used, paints and colors used please.
Amazingly beautiful, but my favorite was the ending shot. You can’t help but smile!
so how much would this cost?
i mean the printing only, not paying the work time for paint etc.
Looks so good, I need to upgrade my Photon Mono to something bigger lol. What do you use to gap fill things like the gap between the horse head and the body, or the gap in the cloak on the rider?
I'd assume they probably either resin welded the parts with UV resin, or they used epoxy or putty. I know my favorite method is resin welding so as to not lose detail
Damn. I’m only at 6mo. Now I can’t wait! Seriously need to get a bigger printer!!!
As always Marcia, your paint job truly brings the model to life. You are so talented! I can’t wait to get my hands on that model!
Amazing work. What printer is this?
I spent almost a month printing this and close to $200 in resin, if i remember correctly, making this model. Very upset with it. The horse and rider are very top heavy and only 2 points of contact to hold it to the base. Turns out this problem has been known for several years, and nothing has been done to address this. I now have a model that is in several pieces because it fell over and broke. For a 12 month loyalty reward this should be fixed. This is far too beautiful of a model to have an issue like this. And as always Marcia, your an incredible artist, phenomenal paint job.
How much is a finished, painted and varnished piece worth?
Damn thats bad ass! Very nice!
This months offerings look really good, I'm seriously considering rejoining.
Curious about your Mono X printer settings
I love this hobby! We can build and paint things we only imagined!
That is incredible!!
Absolut spannend, einem solch großartigem Projekt zuzuschauen.
HAAAAAAAAAAAAAAAAAAAAAAAAAAAAA GRANDE LIND0 EU QUER0000, minha impressora vai levar um mes ou mais, e so de resina e pintura adeus vida social $$$$, mas quem liga!!?
How much resin did this print take including supports?
So cool looking!!!
Looks amazing but how big is the figure at the end?
Why would you use CA glue on that? I would have used 2 part epoxy on anything that large.
Can't wait to get around to printing this!
*_"The biggest decision you have made was to print your largest model, The Dark Rider"._*
Amazing! I love the models you guys make they look so damn good and the faces!! are great many model makers even pros cant get faces right as they are very complex.
This is incredible.
Are the files pre supported? I'd love to learn your support settings.
they are
how much it would cost that if you'll sell it?
Beautiful model. Question: How many buckets of paint will I need to do this one?
Caramba! Ficou incrível de mais! Parabéns.😁
How can I get it this size, I love it
OMG. Amazing model
She did an amazing job 🤠
Beautiful work!!!
ty 😁
Had to learn this new word to describe it: astonishing
Holy Dung Nuggets...
With what printer was it made?
Just WOW! So happy to be a Loot subscriber. How about a 200mm Eve Fargrace?
The Giant Bard/Smasher of Sins in all of Panshaw, sounds cool!
No final results?
That’s amazing! Great job!
Amazing work
Such a detailed figure and such poor final model presentation. Dislike.
I cant seem to find this model on your page. What bundle was this with, or was it a single purchase?
It was a Loyalty Reward, now available on our Loot Rewards page: app.lootstudios.com/rewards-home/
can i buy this stl?
That's epic! What a great job!
This looks amazing!
Maybe I'm mistaken, but I thought you guys did a huge version of the dwarf blacksmith - that was bigger, wasn't it?
This is the biggest on the subscription, it was model at this scale. the Dwarf was just a scaled up mini
8k ir 12k?
Hey, i Cant find the Stl. Were can I Buy it?
Amazing work By the way
How long did this take to print?
Almost a week!
guys i just watched a resin printing introduction video you did 2 years ago recommending a phrozen 4k, i would love to hear what you would recommend in the middle range of resin printers today ,. I was thinking of a jupiter2 but would gladly hear even more details like the issue of some printers being locked to subscription for slicers vs open source, what resin to choose etc. Many thanks in advance. Regards/Ed
Hello very nice job !! Can you help me to find this 3D model on loot studio ? Thanks😅
Is it possible to request your team for a figure that originally was a minuter figure into a large one with beautiful coloring and detail 🙏 if not do you know someone or a company that will?
oh wow me need like OUR BIGGEST MODEL
How much Resin does this Model Take
I saw this on instagram and have been dying to know where to get it! 12 month loyalty reward? bet
Why'd you go through all that effort and not hide the mold lines?
Não vou mentir, achei estranho a cabeça da moça saindo da traseira do cavalo na imagem final 🤣. Mas tanto o modelo quanto a pintura ficaram fantásticas, o trabalho de vocês é maravilhoso! Parabéns.
Loot arrasando como sempre!
Bellissimo ! Che colla usate per assemblare ?
Would love to have the loot exposure settings
How did you fill the gaps?
plz help me where can i find the 3d model?
What printer did you use
What 3d printer did you use
Is this in a monthly loot?
👏🏿👏🏿👏🏿👏🏿👏🏿👏🏿👏🏿👏🏿👏🏿👏🏿👏🏿👏🏿
Not sure how your prints are coming out so beautiful keep it coming!!!! I’ve been trying to print large prints with siraya tech navy grey normal exposure 1.5s and bottom exposure 40s and they won’t stick to supports but small prints come out perfect
you need longer than 1.5 second for each layer to print larger models.
Incredible
Needs more supports
wonderfull work
I love it
Epic 😱😱😱
Lindo
Arrasou
Do you know what brush she is using at 2:02 ? I really need a large brush like that for dry brushing large models
Its a makeup brush. Search for Kabuki Powder brush or similar.
@@Fernanda-gs1qq being new to all of this, is there a special purpose for this brush for the paintwork?? Is it used for effects in the paint??
Impressive