You don’t have to remove the whole back lift gate trim to access the center tail lights. there are 2 windows that pop off right on the trim, that will give you all the access you need. And will save you 30-60 min 😂
Very useful video! I also found the same defective soldered resistor on my board. Just a little clarification: you don't really need to remove all those big plastic parts of the back door.
Worked 100% ! It was that R750 needed resoldering. Very good to mention you need to heat the card under it to get good solder. I have not seen that tip in other videos. Thankfully my workplace has all equipment for this.
Bravo !!! Iti vine sa crezi ca in BMW iti zic sa schimbi complet farurile... daca ai ocazia fa un video si pentru alea din fata pls... ca la modelele led dispare culoare deseori la ledurile de zi... Merci si bravo pentru tot ceea ce faci!!!!!
Salut Ovidiu! Felicitari pentru clip si succes in continuare. Daca poti spune ce microscop folosesti si ce statie de lipit, masa de lucru, sfaturi pentru un incepator. Te rog. Multumesc.
Hello, how are you? I have a series 1I have a problem with the rear LED light. It does not work. I want to know what type of lamp it is running so I can buy from it now. Two new ones cost a lot for me. Can you please help me as soon as possible? Thanks
Thank you my friend, my x5 2021 car, the rear light on the fender and the rear light on the trunk are out of the circuit and sometimes it turns on, and most of the time, the reason , the water leaking from the small wall is a break, do I have to open the inside of the light , or is the problem, for example, the external fuse I have, please advise
Salut, Ovidiu, ai idee daca se poate face ceva la stopuri? Se aburesc putin in partea de sus iarna doar, crezi ca exista vreo rezolvare sau singura solutie este sa fie schimbat? Am un x3 f25 nu e facelift e 2013, multumesc.
Hi Ovi, could I please ask you which set up I need for Ista D? Need to register new EMF module, can I do it just with e-com cable and adapter to usb? The car is f25 x3
Can we do the same diagnosis and apply the same fix for BMW x1 F48 2016 model? Issue is rear Left LED Taillight is not working although left outer light is working fine.
Salut Ovidiu,am un f45 si la farul dreapta fata unul din cele 2 angels functioneaza jumatate cu intensitate normala si cealalta jumatate cu o intensitate mai scazuta.Se poate repara sau.....Ms.
Good evening M.ovidiu this Robert Cruz live in new Zealand my car bmw x3 2007 led tail lights right side are not working I thing is the module some not working
Te salut cu stima! La modelul meu X3 2011 F25 ledul poziție dreapta spate e mai slab ca intensitate decât celalalt. Dacă schimb modulul va rezolva problema? Mulțumesc!
Hey @M.Ovidiu I have a broken E61 LCI 3rd brake light, some of the leds in the array are either off or give very dim light, is there any fix for this? a replacement unit sets me back 150 euro, even from the scrapyard. Any ideas?
You need to have the original seal to be in good condition , clean the vehicle surface, apply a little bit of grease ideally silicon grease and mount it back, no other seals added or other stuff. Watch the video!!!
salut , nici ledurile mele de la F48 2019 nu se mai deschid alea care is pe portbagaj in dreapta, SPUNE-MI TE ROG tare mult, POT CUMPARA PLACILE ASTEA de undeva de pe net, ca nu ma apuc sa folosesc cositor si alte prostii....
Salut . Din pacate nu te pot ajuta , Acest canal de RUclips e cu scop educativ si de entartainment nu e o reclama la un service sau ceva de genul , pentru problema ta va trebui sa apelezi la un service specializat BMW din zona ta ! Multumesc pentru interesul acordat , Succes!
They were done very well ! but due to the regulations in force related to pollution, lead is no longer used in the solder and as a result after many thermal contractions it cracks and creates a cold solder or imperfect contact.
Probably at that time, I was caught on doing the video and disassembled everything, but you are one of the few who knows how to do it! And observe it! You are Awesome!
This video is very misleading you do not need to take all the plastic off, there are two access points when you take off and unscrew the lights. I did this myself years ago. What a waste of time. Secondly you can buy those boards on Amazon for $19 each.
You don’t have to remove the whole back lift gate trim to access the center tail lights. there are 2 windows that pop off right on the trim, that will give you all the access you need. And will save you 30-60 min 😂
Very useful video! I also found the same defective soldered resistor on my board. Just a little clarification: you don't really need to remove all those big plastic parts of the back door.
Yes you are right ! :)
"I'm doing this for me!" - I love it! Amazing workmanship as always! Thanks for the great content
It still is very satisfying to see you work. Have a nice day.
Thank you! Cheers!
Very nicely done. Personally I always like to do so even loads people around me see me waisting time🤨 All the best!
This how the job must be done clean .100% 👏🏽👏🏽
another one bites the dust, great video cheers
Glad you enjoyed it
Thank you for this great video! I will try this repair myself.
Worked 100% ! It was that R750 needed resoldering. Very good to mention you need to heat the card under it to get good solder. I have not seen that tip in other videos. Thankfully my workplace has all equipment for this.
Bravo !!! Iti vine sa crezi ca in BMW iti zic sa schimbi complet farurile... daca ai ocazia fa un video si pentru alea din fata pls... ca la modelele led dispare culoare deseori la ledurile de zi... Merci si bravo pentru tot ceea ce faci!!!!!
Salut Ovidiu! Felicitari pentru clip si succes in continuare. Daca poti spune ce microscop folosesti si ce statie de lipit, masa de lucru, sfaturi pentru un incepator. Te rog. Multumesc.
Bravo Ovidiu!!!! Respect pt ceea ce faci! Super video
Crezi ca pt e70 nonfacelift ai avea ceva referitor la stopuri? Numai bine ,sănătate!!!
ruclips.net/video/lzgDvTMGKVA/видео.html&ab_channel=M.Ovidiu
Hey there, brilliant video!
One question please, do you think this will fix the same problem on F11 2011?
Nothing new here, just perfection…………AGAIN
Hello, how are you? I have a series 1I have a problem with the rear LED light. It does not work. I want to know what type of lamp it is running so I can buy from it now. Two new ones cost a lot for me. Can you please help me as soon as possible? Thanks
Hello. The same problem but I have not LED but halogen. Do I need to make replacement of this motherboard?
Thank you my friend, my x5 2021 car, the rear light on the fender and the rear light on the trunk are out of the circuit and sometimes it turns on, and most of the time, the reason , the water leaking from the small wall is a break, do I have to open the inside of the light , or is the problem, for example, the external fuse I have, please advise
Yes we like!
Thank you for the great video!What is that you put on 14:53? What is the product? :)
Very helpful thanks
Salut, Ovidiu, ai idee daca se poate face ceva la stopuri? Se aburesc putin in partea de sus iarna doar, crezi ca exista vreo rezolvare sau singura solutie este sa fie schimbat? Am un x3 f25 nu e facelift e 2013, multumesc.
Salutare oare se poate schimba și la BMW f11
aceiasi problema am eu la x3 e83 2007 se pot repara ?
Why removed all those panels??
Hi Ovi, could I please ask you which set up I need for Ista D? Need to register new EMF module, can I do it just with e-com cable and adapter to usb? The car is f25 x3
Can we do the same diagnosis and apply the same fix for BMW x1 F48 2016 model? Issue is rear Left LED Taillight is not working although left outer light is working fine.
Unfortunately No , they are different !
Are both boards the same? So does one fit into the other? Or are they different?

Hello, they are identical to all 4 lights, 2 on the tailgate and 2 on the body.
Salut Ovidiu,am un f45 si la farul dreapta fata unul din cele 2 angels functioneaza jumatate cu intensitate normala si cealalta jumatate cu o intensitate mai scazuta.Se poate repara sau.....Ms.
Salut. va trebui desfacut si vazut care e problema , dar de obicei se topeste capatul fibrei si atunci va trebui inlocuita (decapsat farul )
Good evening M.ovidiu this Robert Cruz live in new Zealand my car bmw x3 2007 led tail lights right side are not working I thing is the module some not working
Hello Robert . First you need to do some investigation! if you are not able, I advise you to go to your local BMW specialist!
Te salut cu stima! La modelul meu X3 2011 F25 ledul poziție dreapta spate e mai slab ca intensitate decât celalalt. Dacă schimb modulul va rezolva problema? Mulțumesc!
Salut , nustiu daca va rezolva sau nu problema .. trebuie facut o verificare si vazut daca e o problema de LED sau modul...
Wauuu ,You are amazing!
Bravo
Hey @M.Ovidiu I have a broken E61 LCI 3rd brake light, some of the leds in the array are either off or give very dim light, is there any fix for this? a replacement unit sets me back 150 euro, even from the scrapyard. Any ideas?
Well, it depends on the problem, if you don't disassemble it, you can't know what is the problem !
Hi boss
How can I contact you..
Please
Tinere cum se numesc moduleje alea care le ai reparat,? Ca am aceeasi problema la bmw-ul meu f46. Si nu stiu cum se numesc ca sa comand
Salut, se numesc LED driver
Te rog zi mi cum pot comanda pt un bmw f46. Ca nu stiu cum sa caut. Au o denumire speciala sau?
Alguien me puede decir qué año es la F25?
F25 es 2014-2016
You are the best
Thanks! 😀
How you seal the backlight lamp on trunk on bmw x5 e70
I try original sponge all around backlight and also that black butyl band sealant
But water came inside from time to time
You need to have the original seal to be in good condition , clean the vehicle surface, apply a little bit of grease ideally silicon grease and mount it back, no other seals added or other stuff. Watch the video!!!
Care este sealant original?
salut , nici ledurile mele de la F48 2019 nu se mai deschid alea care is pe portbagaj in dreapta, SPUNE-MI TE ROG tare mult, POT CUMPARA PLACILE ASTEA de undeva de pe net, ca nu ma apuc sa folosesc cositor si alte prostii....
Salut , f48-ul tau e total diferit e cu totul alta generatie si tehnologie folosita , va trebui sa inlocuiesti lampa complet
it is quite cheap ti replace. 40$ for both and you are done
Salut, ma poti ajuta cu un retrofit la un Bmw g30?
Salut . Din pacate nu te pot ajuta , Acest canal de RUclips e cu scop educativ si de entartainment nu e o reclama la un service sau ceva de genul , pentru problema ta va trebui sa apelezi la un service specializat BMW din zona ta ! Multumesc pentru interesul acordat , Succes!
@@MOvidiu ok, multumesc!
Why bmw do this bad cold welding?
They were done very well ! but due to the regulations in force related to pollution, lead is no longer used in the solder and as a result after many thermal contractions it cracks and creates a cold solder or imperfect contact.
@@MOvidiu understood
Why are you removing the whole back panel, when they have light panel access on each side? 🤣
Probably at that time, I was caught on doing the video and disassembled everything, but you are one of the few who knows how to do it! And observe it! You are Awesome!
There’s absolutely no need to remove the entire rear door panel to remove the taillights. Just the covers. Did anyone else realize this ?
Yes , but with what will affect the viewers to watch and enjoy the video ? I repeat this is not a DIY video !
This video is very misleading you do not need to take all the plastic off, there are two access points when you take off and unscrew the lights. I did this myself years ago. What a waste of time. Secondly you can buy those boards on Amazon for $19 each.
This video is misleading in witch way? This is not a DIY , it says very clearly in the video description, this is an entertainment video.
What is the link for the boards? I do not see them in video description. May have overlooked them.