Sewing for Beginners Stretch fabrics on LS14 | Abi’s Den ✂️🧵🌸

Поделиться
HTML-код
  • Опубликовано: 21 ноя 2024

Комментарии • 18

  • @helenreynolds6579
    @helenreynolds6579 11 месяцев назад +1

    Hi Abi, I couldn't have done what I needed to do without your wonderful tutorial. It was so clearly demonstrated and explained, even I couldn't go wrong. Thank you so much.

  • @HomeCentsWithNell
    @HomeCentsWithNell 5 лет назад +3

    I never knew how important it was to choose the right stitch. Thank you!

  • @franceshooper2307
    @franceshooper2307 5 месяцев назад

    Thanks so much for this tutorial as I was gonna buy a walking foot! Will hang off for now also watching you stitch with stretched fabric is a game changer for me so thankyou 😊

  • @foxxybrown291
    @foxxybrown291 5 лет назад +3

    That’s the 1st sewing machine I got and I absolutely love it! And I have used a generic walking foot with it and it seemed fine. Been using it since for few years and no damage has been done. But I guess it just depends on the foot and how often you use it. I didn’t know what stitches 12-14 did 🤣🤣🤣 Thank you xx

  • @suelampshire33
    @suelampshire33 5 лет назад +2

    Thanks Abi.... that is so helpful, because I am a beginner making clothes from knit fabrics on the same machine. 👍

  • @natalieflynn7383
    @natalieflynn7383 4 года назад +1

    Such an informative video thank you. Do you have a video on tension? I am confused by the numbers I am a total beginner thank you

  • @EmMa-fr3nl
    @EmMa-fr3nl 3 года назад +1

    Great tutorial ❤️ thank you xx

  • @dshe8637
    @dshe8637 4 года назад +2

    Sometimes beginners stretch the fabric accidentally while trying to keep it straight; don't be afraid to pause and rearrange your work instead of trying to pull it back into line. Also, if you stop with the needle down in the fabric and raise the presser foot, it will stay in place while you place it straight.

  • @buttsahab4179
    @buttsahab4179 5 лет назад +2

    thanks for the very informative video, I want to know that can I use the side cutter foot with my brother ls14 machine

  • @birdyboy7971
    @birdyboy7971 5 лет назад +1

    Truly wonderful and masterful tutorial. My only suggestion for improvement would be to show a clear picture of each stitch you are using. (1,2,3,4,etc are different on every machine and I could NOT see the dial that well to determine the stitch. Perhaps a pic of the manual showing these stitches?) I just wnt to the amazon site you referenced & they have a close up of the stitch selection dial.
    Again, thank you so much for this video.

    • @AbisDen
      @AbisDen  5 лет назад

      Thank you, that's a great idea,

  • @Aliali817
    @Aliali817 5 лет назад +1

    Great video.x

  • @Jules-fx2sc
    @Jules-fx2sc 3 года назад

    I have this machine, but on setting 4 my zig zag is nowhere near as wide as yours. Is there something else I need to do?

  • @amycrawford5773
    @amycrawford5773 3 года назад +1

    Hi I have this machine but it won't let me turn to the zig zag stitch is there a reason for this?

    • @AbisDen
      @AbisDen  3 года назад

      Possibly. Check needle is up and out. Check bobbin race is in properly.

  • @noshaba4274
    @noshaba4274 5 лет назад +1

    I don't v this model but the thing I am confuse with like do we need to change needle and foot to sew the stretchy fabric?????

    • @AbisDen
      @AbisDen  5 лет назад

      Noshaba Nargis yes, change your needle to ball point needle. You will find stitches are much better with the right needle.

    • @noshaba4274
      @noshaba4274 5 лет назад

      @@AbisDen thanks for ur prompt reply. But I didn't get any ballpoint needle with this machine. I recently bought this machine. I live in oman. Don't know wd it be available or not. Any other solution. How to fix the foot. This should be little lose or what