Olá!! Eu fico curioso pra saber como e limpo a carcaça do câmbio ( eu antes de abrir um câmbio limpo toda a carcaça ,retirando a maior quantidade de sujeira com jato d'água e muito diesel e escovação A i no seu país é fácil obter máquinas de lavagens né ?!?!?
@@CurmudgeonTransmission спасибо,нашел на ebay фото,по фото нашел аналоги,просто у нас в казахстане дорого покупать запчасти на американские старые автомобили)
Hey Tom, the 4t65e I rebuilt 3 years ago started having reverse slipping Friday, all forward gears are fine. Any ideas what might have happened to it? Thanks
If 1st gear is ok you either have a reverse band/servo problem or #5 check ball problem. While it is rare for the reverse band to break, I have seen it happen. BTW, there are 2 #5 check balls. They are both in the valve body side. The large one on the left and the small one just below it.
@@CurmudgeonTransmission I drove it this morning when cold reverse seemed fine till it got up to temp,then it started like slipping in reverse, it's like a shutter but it still backs up, just removed reverse servo and everything seems fine on it. It did raise pressure up I guess from detecting a slip. Can any of the electric solenoids cause this, when I rebuilt it 3 years ago I put all new acdelco solenoids in it.
![[SFM] Risky Recital](http://i.ytimg.com/vi/RzNkY1_Nk3o/mqdefault.jpg)
100%❤ الاوتوماتيك
Thanks
I always enjoy watching your videos
I appreciate that!
Olá!! Eu fico curioso pra saber como e limpo a carcaça do câmbio ( eu antes de abrir um câmbio limpo toda a carcaça ,retirando a maior quantidade de sujeira com jato d'água e muito diesel e escovação
A i no seu país é fácil obter máquinas de lavagens né ?!?!?
Yes it is. Diesel is fine, or mineral spirits.
Is this a manual?
@@TheCRTman Yes
Здравствуйте, подскажите пожалуйста номера роликовых подшипников??
I don't know the numbers. You can contact WIT or Transtar and they can get you the proper kit for it. Links are in the description.
@@CurmudgeonTransmission спасибо,нашел на ebay фото,по фото нашел аналоги,просто у нас в казахстане дорого покупать запчасти на американские старые автомобили)
Hey Tom, the 4t65e I rebuilt 3 years ago started having reverse slipping Friday, all forward gears are fine. Any ideas what might have happened to it? Thanks
If 1st gear is ok you either have a reverse band/servo problem or #5 check ball problem. While it is rare for the reverse band to break, I have seen it happen. BTW, there are 2 #5 check balls. They are both in the valve body side. The large one on the left and the small one just below it.
@@CurmudgeonTransmission I'm fixing to start on it and see what happened, thank you!
@@CurmudgeonTransmission I drove it this morning when cold reverse seemed fine till it got up to temp,then it started like slipping in reverse, it's like a shutter but it still backs up, just removed reverse servo and everything seems fine on it. It did raise pressure up I guess from detecting a slip. Can any of the electric solenoids cause this, when I rebuilt it 3 years ago I put all new acdelco solenoids in it.
Should have problems in other gears also. Did your kit come with the metal channel plate gaskets or paper?
@@CurmudgeonTransmissionI'm pretty sure it was metal gaskets, kit I ordered was deluxe L2 kit with red clutches.