ERCF Filamentalist Rewinder Assembly
HTML-код
- Опубликовано: 10 сен 2024
- Github: github.com/Enr...
----------------------------------------------------
PCB Store: store.isiks.tech/
----------------------------------------------------
Support me on:
GitHub Sponsorships: l.isiks.tech/G... (one time or monthly)
Patreon: l.isiks.tech/P...
RUclips Memberships: l.isiks.tech/M...
----------------------------------------------------
Join the Isik's Tech Discord Server:
l.isiks.tech/D...
----------------------------------------------------
Find me here:
Twitter: l.isiks.tech/T...
Patreon: l.isiks.tech/P...
GitHub: l.isiks.tech/G...
Thingiverse: l.isiks.tech/T...
Amazon Page (Tools I like): l.isiks.tech/A...
Polymaker Affiliate: us.polymaker.com?aff=147
----------------------------------------------------
There are affiliate (or Amazon Associate) links above. I earn a commission on qualifying purchases.
Nice build!
Nice job. Thanks for the help.
Will this fit in a RepBox?
Do printed parts need supports when printed? And thank you for the video. I am going to print and assembly.
This is in the list of printed parts in the Filamentalist github site.
MR is for miniature metric bearing with special dimensions
nice.. could you tell me the dimensions of the rewinder.. curious if this can fit in a 21cup dry box.
Thx for sharing! I too want to build some. May I ask if it needs much reverse-force to roll back the filament into the roll in case the roll is almost full (heavy weight at that moment)?
If you're using, or upgrading from a ERCFv1 or v2 RC1A version you may want/need a higher torque gear motor. Many in the Beta team ran NEMA 17's spec'd at 55 N-cm max torque and config'd them for 1-1.5A (probably overkill...). Grafton's 40 Tooth NEMA 17 Mod is a good addition for gaining more speed from a high torque motor. This may not be required so if you already have built your ERCF, try the Filamentalist with the motor/gearing you have and decide if you think you need more torque/speed.