Speechless ........................ The DC-16, surely is the best quality Transmitter in the world. Carved from a solid block .... I will stick with my Taranis, but, I do know quality when I see it !
es macht einfach Spaß als stolzer Besitzer einer jeti dc 16 zu sehen wie das Produkt das man benützt und fasziniert gefräst und bearbeitet wird :) weiter so jeti modellsport ! ;)
Ich bin Stolz mit was für einer hohen Qualität die Sender bei euch gefertigt werden. Und freue mich schon riesig auf mein neuen Sender DC 24 Dark Orange Carbon Line Multimode.
JJ, připojuje se. Opravdu nádherná práce a věřím, že i kvalita vysílače bude na špičkové úrovni. Ale to je skoro jisté, JETI přeci dělá kvalitní výrobky - přijímače, regly, BECy a vše osatní taky.
velmi zaujimave videjko...aky cas realne trva vyroba jedneho ramu ? nebolo by jednoduchsie robit nejake odliatky ? zda sa mi ze odpadu pri tomto procese je az privela
Now I know why my DS-24 feels so solid. Quality is outstanding, and seeing this production vid, I think the price tag is surely justifiable! Build quality: 100% - Programming: 95% - Haptic: 100% I must confess that the new Spektrum ix-20 gets my attention, but it looks like a cheap plastic case, with a super duper display and a lot of interesting functions for sure. But the build quality is just 0?%,
Cena kovové formy pro tlakové lití by asi nebyla úměrná požadovanému množství. A lití do gravitační kokily nebo do písku by nesplňovalo nároky na kvalitu. A než nějaký plastový výlisek, to raději pevný hliníkový rám.....Pěkná práce, Jeťáci...!
Podstivá práce ? Vždyť to udělá mašina za pár korun.......ty pak jdeš a koupíš si tohle rádio za 30 nebo 50 tisíc !!! To ti přijde normální ? Živíme tuhle předraženou společnost !!!
I like the transmitter, but what a waste of good aluminium. 4 panels, one underplate and 8 hex screws would have done the trick too. 90% of het block was wasted.
This is the wrong place for that type of comment. Jeti owners get their very own billet-milled case for their transmitter. This makes it FAR more special that a bunch of stamped panels screwed together. Aluminum is recyclable and the amount of aluminum Jeti uses is nothing compared to the soda can or automotive industry.
@@gabrielmorales9752 LMAO. This the right place. Because this is the place where you see >90% of a massive block disappear for no good reason. Anyway, congrats for two pre-chewed arguments that, unfortunately, are useless in the context. I never said Al wasn't recyclable but I will say that it will take a lot of energy to get all that back into one piece. Your second argument is a rough diamond. Because what you say is basically that you can waste whatever you want as much as you want, as long as you aren't the most wasteful company or industry on the planet, it's OK. Please reply, I can't wait for the sequel.
@@VUO4E ...not really arguments, but rather appreciation for the product. I still say this is the wrong place for your comment because you are targeting one of the most desirable aspects of the radio's construction. The context of this video IS THAT, you get a, milled aluminum case. You can argue that everything we do is wasteful unless we operate at the bare minimum of energy and at maximum efficiency. An industrialized world with different levels of purchasing power, does not operate that way, though. It's interesting that you are eagerly waiting for a response...individuals such as yourself, are never satisfied, you simply enjoy arguing, lol.
@@gabrielmorales9752 OK, so you'd rather I comment about the aluminum tray in video about the circuit board ? Really... And yes, I was eager to read the bogus arguments and you came through, like a hero. What if they made it out of carbon ? very little waste, and as desirable as Al. And fyi, you replied to a comment I made so that makes you the one who likes to argue...LOL X 2
![JETI MULTIMODE | MODE ÄNDERN UND KNÜPPELAGGREGATE EINSTELLEN | JETI DS-12 SPECIAL-EDITION [DEUTSCH]](http://i.ytimg.com/vi/GFRRQ3axXuM/mqdefault.jpg)
![JETI MULTIMODE | MODE ÄNDERN UND KNÜPPELAGGREGATE EINSTELLEN | JETI DS-12 SPECIAL-EDITION [DEUTSCH]](/img/tr.png)
О ГОСПОДИ, ЭТО САМОЕ ЛУЧШЕЕ ЧТО Я ВИДЕЛ В СВОЕЙ ЖИЗНИ!
I want to buy every Radio Jeti Makes. State of the Art
Speechless ........................
The DC-16, surely is the best quality Transmitter in the world.
Carved from a solid block ....
I will stick with my Taranis, but, I do know quality when I see it !
es macht einfach Spaß als stolzer Besitzer einer jeti dc 16 zu sehen wie das Produkt das man benützt und fasziniert gefräst und bearbeitet wird :) weiter so jeti modellsport ! ;)
Skvělá práce! Věřím, že takový vysílač si stačí pořídit jednou... a máš ho do konce života... Jen tak dál. Tato filozofie se mi líbí!
Ich habe meine DC-16 gestern bestellt!
Hoffentlich kommt sie bald!
Ich bin Stolz mit was für einer hohen Qualität die Sender bei euch gefertigt werden. Und freue mich schon riesig auf mein neuen Sender DC 24 Dark Orange Carbon Line Multimode.
This is the exact reason i have gone for a Jeti DC-16! Much better than those cheap plastic transmitters! Cant wait to order mine :D
JJ, připojuje se. Opravdu nádherná práce a věřím, že i kvalita vysílače bude na špičkové úrovni. Ale to je skoro jisté, JETI přeci dělá kvalitní výrobky - přijímače, regly, BECy a vše osatní taky.
OK fellas, this is quite cool for an RC transmitter!
Just scored a dc16.
Craftsmanship to the gimbals.
I'll get the upcoming ds12, to complement it 😎
Also have scored a ds14, hehehe.
C'est beau la technique quand même !
velmi zaujimave videjko...aky cas realne trva vyroba jedneho ramu ? nebolo by jednoduchsie robit nejake odliatky ? zda sa mi ze odpadu pri tomto procese je az privela
Now I know why my DS-24 feels so solid. Quality is outstanding, and seeing this production vid, I think the price tag is surely justifiable!
Build quality: 100% - Programming: 95% - Haptic: 100% I must confess that the new Spektrum ix-20 gets my attention, but it looks like a cheap plastic case, with a super duper display and a lot of interesting functions for sure. But the build quality is just 0?%,
Hlavně at už jsou v obchodě. :)
Cena kovové formy pro tlakové lití by asi nebyla úměrná požadovanému množství. A lití do gravitační kokily nebo do písku by nesplňovalo nároky na kvalitu. A než nějaký plastový výlisek, to raději pevný hliníkový rám.....Pěkná práce, Jeťáci...!
Realy satisfying to watch 😉👍✈
Skutočne pekná strojárska a poctivá práca.
Podstivá práce ? Vždyť to udělá mašina za pár korun.......ty pak jdeš a koupíš si tohle rádio za 30 nebo 50 tisíc !!!
To ti přijde normální ? Živíme tuhle předraženou společnost !!!
не аппа, а мечта...)))
říkal jsem si proč je vysílač tak drahý ... tak už vím ... ale jinak krásné video.
No nejlevnější není, ale if bude umět to co se očekává a šušká...at už ji mám doma :)
masakra, graupner i hitec może sie schować, a ja sprzedaję sanwe bo chcę miec te pudło !
jetzt weiß ich auch warum der kram so teuer ist.
I like the transmitter, but what a waste of good aluminium. 4 panels, one underplate and 8 hex screws would have done the trick too. 90% of het block was wasted.
Not wasted at all. The swarf will be recycled and used again along with the MILLIONS of drinks cans etc
This is the wrong place for that type of comment. Jeti owners get their very own billet-milled case for their transmitter. This makes it FAR more special that a bunch of stamped panels screwed together. Aluminum is recyclable and the amount of aluminum Jeti uses is nothing compared to the soda can or automotive industry.
@@gabrielmorales9752 LMAO. This the right place. Because this is the place where you see >90% of a massive block disappear for no good reason. Anyway, congrats for two pre-chewed arguments that, unfortunately, are useless in the context. I never said Al wasn't recyclable but I will say that it will take a lot of energy to get all that back into one piece. Your second argument is a rough diamond. Because what you say is basically that you can waste whatever you want as much as you want, as long as you aren't the most wasteful company or industry on the planet, it's OK. Please reply, I can't wait for the sequel.
@@VUO4E ...not really arguments, but rather appreciation for the product. I still say this is the wrong place for your comment because you are targeting one of the most desirable aspects of the radio's construction. The context of this video IS THAT, you get a, milled aluminum case. You can argue that everything we do is wasteful unless we operate at the bare minimum of energy and at maximum efficiency. An industrialized world with different levels of purchasing power, does not operate that way, though. It's interesting that you are eagerly waiting for a response...individuals such as yourself, are never satisfied, you simply enjoy arguing, lol.
@@gabrielmorales9752 OK, so you'd rather I comment about the aluminum tray in video about the circuit board ? Really... And yes, I was eager to read the bogus arguments and you came through, like a hero. What if they made it out of carbon ? very little waste, and as desirable as Al. And fyi, you replied to a comment I made so that makes you the one who likes to argue...LOL X 2
What a waste of Aluminium and energy (I know they re melt the waste Al but they need energy to melt all that).