Excellent video (Gino) also yes think Starter needs clean plus rebuilt plus power connector needs clean up with tell that and carb looks orgnail never clean too also ! Plus too what my father used clean tractors and combine fuel out was Hot warm water 50% & 50% Vinegar mix 2 times and swish with clean rocks pepples and use air compressor spray nozzle up fuel bowl bottom tank with fuel cap on to blow bubbles for 5 mins each dose of mix and drain them plus repeat 2 times and wash with hot warm water! Yes tank took off plus glass bowl on gas and desiel one fuel line too and assembled after 2 hours of drying out ! Working perfectly did each year plus 2 times year fuel filters in Spring and Fall Season! Also Starter when put back on Power Connectors use thin layer Vaseline or Grease or Anti Seize plus bolts threads Gino it provides protection and rust up!
@@FarmallFanatic Strangely it runs fine, but the rust bugs me. My work clothes Cubs are clean , even my parts Cub is clean. Never had issues before, but it is what it is. Thanks
Congratulations on hitting the 30k. You were the first channel I subscribed to and the only other 2 for me are Boehm Farm and Ghost of Lucious Clay. Real channels for real people!
You have about the same weather as we do here in West Virginia. Normally we might get a dusting of snow on the first week deer season normally the very first day. Then it goes away as fast as we got it. Ive seen upper 70°s for rest of buck season to. So you never know.
the ring gear will have 4 places that will wear you turn the engine an 1/8th of a turn and look at the ring gear for bad spots. that bendix looks like a possible cheap after market. sometimes when these fail they wont disengage and keep turning the starter when the engine is running.. here is a trick when cubs were changed over to 12volt IH did away with the bendix starter a different front pulley was installed and a 12v starter generator replaced the 6v generator. many cub owners that discovered a bad ring gear that did not want to send the cub to the service dept did the starter generator conversion was cheaper.a solenoid and a push button switch like the 756 used...and a different voltage regulator was installed.
You mentioned an "in-frame" overhaul ? The c-60 engine has rods larger than pistons. The crank has to be removed before pistons are removed from bottom.
I believe a large number of the Cubs past the mid-1950s were sold to municipalities, schools, highway departments, cemetery associations, etc and had some sort of mowing attachments on them. The under slung exhaust permitted them to go under trees and other low clearance places. You could still order them with a vertical exhaust, but they were uncommon.
Having trouble with my 49 Cub starter! Just wondering what you pay on the average for a starter rebuild? I see you can buy new ones on line for about 130, probably a Chinese knockoff!
I only have one request from you Mr Farmall fanatic, I sure hope I never have to deal with turning your channel on and seeing that you have named your tractors. I don't have a problem with all the little funny things that you say that are corky and only come out of your mouth. But please don't name your tractors
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
I love how you do a top notch job on your equipment keep up the good work and the videos I love them they're great thanks
Thank you
You hit 30,000 because you're doing a great job. Just being yourself and being successful at what you're doing. Best channel I watch.
Thank you 👊
Congratulations on the 30,you've earned it!
Just get a chair and sit down and relax and then you won't be hurting your back being bent over that's the easiest way to work on them
I can’t disagree with you but I would keep a 5 gallon bucket handy for my anywhere shop stool. 😂
Excellent video (Gino) also yes think Starter needs clean plus rebuilt plus power connector needs clean up with tell that and carb looks orgnail never clean too also ! Plus too what my father used clean tractors and combine fuel out was Hot warm water 50% & 50% Vinegar mix 2 times and swish with clean rocks pepples and use air compressor spray nozzle up fuel bowl bottom tank with fuel cap on to blow bubbles for 5 mins each dose of mix and drain them plus repeat 2 times and wash with hot warm water! Yes tank took off plus glass bowl on gas and desiel one fuel line too and assembled after 2 hours of drying out ! Working perfectly did each year plus 2 times year fuel filters in Spring and Fall Season! Also Starter when put back on Power Connectors use thin layer Vaseline or Grease or Anti Seize plus bolts threads Gino it provides protection and rust up!
Awesome old farmall tractors
Congrats on the 30k. You've acquired quite the farmall fleet!
Getting there
Congratulations on 30,000 subs Gino keep up the great work !🇺🇸
You made it to 30,000 subscribers because of who you are and what you put into your videos good job my friend.👍
Thank you 👍
Gino I appreciate your tips on cleaning out the fuel tank. My nicest Cub has a rusty tank and I will have to get after it next spring.
Yea or you'll struggle forever
@@FarmallFanatic Strangely it runs fine, but the rust bugs me. My work clothes Cubs are clean , even my parts Cub is clean. Never had issues before, but it is what it is. Thanks
The non-existent bucket 💥
There 11% off at Menards right now. I bought a half dozen.
@@stanleyconrad4234
💪🏼💥
Ahahahahahahaha
Congratulations on 30k 💥
Really appreciate your videos 👍
I like those 54-58s a lot. I’m wanting a 300 row crop
I've ran into a couple nice 3 hundreds around here
Really appreciate the videos. Very helpful 👌
Nice work Gino I used some nuts in the tank clean knocks off crap then spray a liner in if needed. Have a great day.
These tanks aren't separate from the hood...that's the problem
@@FarmallFanatic ic I'm not familiar with them. It's a nice tractor though
Let the games begin! Looking good.
Congratulations on hitting the 30k. You were the first channel I subscribed to and the only other 2 for me are Boehm Farm and Ghost of Lucious Clay. Real channels for real people!
Thank you 👊
When I see you take a wrench and put it on a nut and it turns without breaking the line…… I think to myself…… that lucky bass🐟turd!😂😂😂
I've broke wrenches lol
Congratulations on the 30k 👍🍻
Kudos on 30K subs hoss, you deserve at least that and more. Respectful and 1st class channel. Here’s to many more vids and subs🍺🇺🇸🍺
You've definitely been around a while
Congratulations on 30k subs 👌 nice little tractor to work on as you say no big heavy spannering to do 😀 looking forward to the rebuild 👍Red Power 💥
Thank you 👊
I was here when it was the m and the 756 its kindda cool to see how many you have now
Never know where life takes you
@@FarmallFanatic im 16 i gotta c and a oliver 770, my grandpa is 74 and has a whole fleet of farmalls one day thats what i want
You have about the same weather as we do here in West Virginia. Normally we might get a dusting of snow on the first week deer season normally the very first day. Then it goes away as fast as we got it. Ive seen upper 70°s for rest of buck season to. So you never know.
Right
Congratulations brother. More and more people are discovering Red Power.
Thank you 👊
the ring gear will have 4 places that will wear you turn the engine an 1/8th of a turn and look at the ring gear for bad spots. that bendix looks like a possible cheap after market. sometimes when these fail they wont disengage and keep turning the starter when the engine is running.. here is a trick when cubs were changed over to 12volt IH did away with the bendix starter a different front pulley was installed and a 12v starter generator replaced the 6v generator. many cub owners that discovered a bad ring gear that did not want to send the cub to the service dept did the starter generator conversion was cheaper.a solenoid and a push button switch like the 756 used...and a different voltage regulator was installed.
The starter is rebuilt...hoping for the best
Tractor man44 has a real good video on cleaning and sealing rusted tanks . Definitely worth taking a look at . Hey really enjoy all your videos !!
Rust Out “water softener and cleaner”? Just asking, because that was the results given when I did a search.
I know when you have light rust it works.. a lot of people use acid ...you gotta be very careful using that crap
Congratulations on 30k!
Thank you 👊
Massive 🎉 congrats brother
You mentioned an "in-frame" overhaul ? The c-60 engine has rods larger than pistons. The crank has to be removed before pistons are removed from bottom.
Guess I'll find out
I'm like you. I was the guy that would do all the things I thought needed attention, so I wouldn't have a breakdown.
Nice little Cub. Your thoughts on the rear exhaust as compared to the exhaust exiting through the top of the hood?
For doing brush hog work...priceless
I believe a large number of the Cubs past the mid-1950s were sold to municipalities, schools, highway departments, cemetery associations, etc and had some sort of mowing attachments on them. The under slung exhaust permitted them to go under trees and other low clearance places. You could still order them with a vertical exhaust, but they were uncommon.
I just use regular clear vinegar and it works great for me
Yes I've definitely used white vinegar
Hey you got 40k now 👍
I need to clean the carb and the tank on my H. I ran it out of gas, and now it won't run right lol
I ran my 57 cub out of gas today lol
Nice job, by the way it's 30.1k😊
Yea I saw that 😳
How difficult is it to find machine specific replacement parts like points, condenser and other "out of fashion" items?
Not difficult at all
Here we go
💪🏼❤️💥
👍👍
Put the snow blade on the supper c it will work then
Lol
any news on the combine parts?
Yeah I found them we have been using my friend's combine
Yep gonna have to change yer name Farmallcubbiefanatic
Lol
Having trouble with my 49 Cub starter! Just wondering what you pay on the average for a starter rebuild? I see you can buy new ones on line for about 130, probably a Chinese knockoff!
Rebuild the original...probably 100 bucks
Rebuild the original...probably 100 bucks
Can't wait till you get it all squared away.
Me too
Running out of room need a bigger shed soon
A couple
I just seen a can of WD-40 selling for $10 I almost fell on the floor
Everything going up...big time
I don't know if you can here it live , but I wonder what the metal or maybe tin noise it's making , it's very pronounced on the video. Just wondering
Not sure
You need to change your intro to include the Cubs.
Eventually I will
I can’t drive 55!!!!!
Fitty fi fifty fi ghetto talk AHAHAHAHAHAHAHA
I only have one request from you Mr Farmall fanatic, I sure hope I never have to deal with turning your channel on and seeing that you have named your tractors. I don't have a problem with all the little funny things that you say that are corky and only come out of your mouth. But please don't name your tractors
The factory beat me to it lol
@@FarmallFanatic Awesome answer!😂