VAG sunroof and sunshade calibration / adaptation (Audi VW Seat Skoda)
HTML-код
- Опубликовано: 4 май 2020
- How to perform calibration of the sunroof and sunshade mechanism in VAG cars (Audi, Volkswagen, Seat, Skoda). If the mechanism in your car is not working correctly, then you might need to perform adaptation procedure. You don't need diagnostic interface to fix it. You can start the end point learning procedure with this tutorial.
ℹ️ In this video you can see #Audi S6 C7 (4G) but the same procedure should work as well in Audi, VW, Seat, Skoda cars and the rest of the VAG group.
#Calibration / Adaptation / Basic settings / relearing of the sunroof and sunshade end positions is needed if:
➡️ single-click open and close is not working,
➡️ comfort open and close from the remote control is not working,
➡️ #sunroof stays open or the sunshade is not closing properly,
➡️ pinch protection is not working,
➡️ mechanical parts were removed and/or replaced,
➡️ roof control module has stored faults about missing basic settings or missing calibration.
💡 Sunroof / sunshade adaptation procedure is easy:
1. Turn the ignition on.
2. Press and hold sunroof closing button. In about 10 seconds roof will start to move.
3. Keep holding the button during the procedure.
4. When roof closes and stops you can release the button.
5. Press and hold sunshade closing button. In about 10 seconds sunshade will start to move.
6. Keep holding the button during the procedure.
7. When sunshade closes and stops you can release the button.
8. Calibration of the end points is done. You can turn the ignition off. Your sunroof and sunshade should work properly if there's no mechanical damage.
⚠️ Make sure that sunroof area is free of any obstacles. During the adaptation procedure pinch protection is not working. If there's risk of something getting trap in the roof window, please cancel the procedure.
✅ mr-fix.info/
✅ Facebook: / mrfixpl
✅ Instagram: / mrfixpl
✅ Pinterest: / mrfixpl Авто/Мото
Man thank you so much, saved me a trip to the dealer and probably several hundred dollars. Appreciate you!
Thanks for this tutorial. Works also on Audi A6 Allroad C8. Mine has 2 sunroof blinds, one in the front and one in the rear. The rear one was bumping back when closing with position 2. I was able to close it with position 1 by releasing button just before reaching end position.
While having rear blind in this “almost” closed position, I held close button in position 2 and after 10 seconds the blind made a “bump” noise. Then I tried to open and close it and now it works correctly and knows its home positions.
Thank you!! Worked like a charm on my ‘17 Golf
Thank you! This even fixed the open/window open/closed feature with key remote on a MK7.5 GTI
Worked like a charm. Now my sunshade works perfectly.
Happy to help!
Thanks a bunch! Worked well on my MK7 GTI, solved an annoying sunroof rattle.
Happy to help!
You are a goddddd thank you man!!!!!! My s6 sunroof was not working and i just fix it i tought about that my knob is broken and now its fixed thank you!!! 👍❤
Happy to help!
Thank you so much.. this is the only tip that worked for me
Happy to help!
Thanks, awesome tips❤ My sunroof was stuck and I manually moved it a little bit and after that I did the callibration and everyting it’s back to normal😄
Happy to help!
Worked!
Thank you
Happy to help!
Thank you!!! It worked!
👍
Worked perfectly on a 2019 VW Atlas! Thank you!
Thank you. It worked on my daughter's 2015 Golf sportwagen tdi
Happy to help!
Hallelujah! It worked!!!
Happy to help!
do you have a procedure on how to program a new sunroof control panel to the car? original owner broke the panel where it bolts in and I bought a used panel from another car. I have VCDS, just not completely savvy with it yet
Hi. Thanks for this and all of your videos! Very helpful! Do I push and hold the button for the open or for the close function? Thanks!
Are you talking about the comfort opening with the remote?
Is the procedure the same for a dual sunroof (like on the A8)? Or are there additional steps? My front shade won’t close, but everything else works fine.
Did you fix it bro?
Any fix for this?
Nothing happens on my s7, any clues?
Is it possible that the car forgets the initial spot the sunroof is supposed to be in and goes back to the incorrect spot, I’ve tried this method and it still stops in the incorrect spot
Hello and thank you for the video. On the Audi A8L 2015 with 2 sunroofs, will anyone open? eighter the one in the front or the one in the back? Because I can only tilt them, but not open .. Could you help? It has 2 separated sunshades also, one for each sunroof. How can I open the sunroof?
I have a 2015 A8L with 2 roofs, i was having the same problem. I followed what he said in the video and now it works.
I have a ‘16 A8L and my rear sunroof sunshade snapped off track. The motors still work when I press the button. But I can’t figure out how to get the shade back on. Can you help with a video or give me a way to contact you directly.
hello! i have same problem with sunshade at a6 c7 allroad. you fix it?
Hi, thanks for the info, I do everything exactly the same way you do in the video and the sunroof do the same things, but still doesn't work, do you know why? My sunroof doesn't open with the button, just with comfort mode using the key. Is like the reset doesn't apply.
I would recommend using diagnostic tool to check faults from the roof control module. There might me a mechanical issues that you need to fix first, then do the calibration.
Nie działa To u mnie, co zrobić w vcds żeby to ruszyło?
The link to the manual doesn't work for me... how many pounds of torque should they be tightened with???
?
Ho un Audi q5 del 2018 il parasole si apre giusto un po’….e anche il tettuccio si alza pochissimo