Jenkem really is pretty rad. If there was a Little Brother to the infamous Big Brother, you'd be it. IDK if anyone is old enough to remember that but believe me it's the ultimate compliment. "Even your mom likes Quickies!" (Bearings) Legendary AD
In this era I think it's even more difficult to create a platform like this cause all of the censorship and political correctness. And all the platforms supporting bs channels instead of the creative ones .
the white coat made me think he knew what he was doing, but by the time he was shoving a mechanical pencil into it and taping it together, I started to have doubts
*uses favorite skateboard wheel for DIY mold. (Knocking at door) “Congratulations George Powell has sent me here to put you on the bones brigade!?” -guy in fancy suit. Me a kinda burnt out 33 year old skater dad with dreams: “ REALLY!? it’s about time they seen my sponsor me tape!” Process server: “no not really, but he is suing you!”
To my knowledge the urethane is to be baked @ 200° for half an hour ( I'm more certain about the temperature than about the timespan they are supposed to be baked in the special oven)
Dear Scientists at Jenkem Labs, I've been saving a lot of empty beer cans in my backyward, and I'm thinking of making a primitive furnace and forging some aluminium trucks. Have you experimented with this process before? Do you have any advice for forging my own trucks?
So I did this awhile back with a little more care and actually made a skate-able wheel. check it out -> ruclips.net/video/mz4T7l2CHsg/видео.html and since then I have perfected the process and made multiple sets of wheels and stated making a how to video -> ruclips.net/video/kFz1ug8JcYc/видео.html
jenkem the place where you get el toro wrong. I left a comment on jenkem's website and immediately started receiving spam e-mails. Thanks for selling my e-mail, jenkem.
How the fast skaters do it ..... virgin olive oil GOAT. Next week on Jenkem labs how to replicate Scott Bournes blk out tatts with a nikko and a safety pin ...warning may send you to France to quit skating and become a poet and get into subversive art..
Skateboarder Attempts To Make Gourmet Skate Wheels | Gourmet Makes | Bon Appétit
This video is a disaster and I love it
This is what I expect out of every skater channel
It’s Always Sunny in the Jenkem labs
Jenkem really is pretty rad. If there was a Little Brother to the infamous Big Brother, you'd be it. IDK if anyone is old enough to remember that but believe me it's the ultimate compliment.
"Even your mom likes Quickies!" (Bearings) Legendary AD
WolfWould the good Ol days
In this era I think it's even more difficult to create a platform like this cause all of the censorship and political correctness. And all the platforms supporting bs channels instead of the creative ones .
I dont know if old enough is the term but i do get what you’re sayin, its also skate history as thats where a lot of bad ass shit originated from
i have a big ass bundle of big brother mags..the newer shit.
next time do a Aluminum deck, urethane trucks & maple wheels..
first of its kind
That looks wheel bad.
...like, WHEELIE WHEELIE BAD!
Hahahahhahaha ur the best bud
Maybe they will still work for a willy grind...too bad i think they r willy hard
It's crazy how this is how all wheels are made
the white coat made me think he knew what he was doing, but by the time he was shoving a mechanical pencil into it and taping it together, I started to have doubts
I could make a better wheel from a dry piece of poo
vheck56 sounds more like making Jenkem to me
Try it
perfect. how do I place an order?
I am purely interested in, what really is in those bottles and where do You find substances to make such liquids in nature.
Jenkem Labs?
That doesn't sound sketchy whatsoever.
do they flat spot?
Loved every second of this segment
I've wanted to make wheels alot lately, this is awesome !
What kinds of resin did you use? I want to make some but can't find any info on the kinds of resin used
*uses favorite skateboard wheel for DIY mold.
(Knocking at door)
“Congratulations George Powell has sent me here to put you on the bones brigade!?” -guy in fancy suit.
Me a kinda burnt out 33 year old skater dad with dreams: “ REALLY!? it’s about time they seen my sponsor me tape!”
Process server: “no not really, but he is suing you!”
To my knowledge the urethane is to be baked @ 200° for half an hour ( I'm more certain about the temperature than about the timespan they are supposed to be baked in the special oven)
Nah epoxy urethanes cure at room temp via exothermic reactions.
"I try to make it science but not too science for all the Dummies out there"😢😢
Dude this hurt so bad.
best show in skateboarding
Dude this is hilarious!
This was amazing, MORE MORE MORE! :D
Nora would love those
That looks like an actual jenkem wheel. Make a box!
*Spitfire wants to know your location*
That's the same shit quality like spitfire
@@robolinoschmidt8676 😆
Jenkem craft wheels $100 each (include a sticker)
Ali sells wheels for 50 cents but you got to buy 100 or 200 pcs
What did you spend on urathane?
Keep em coming!
Dear Scientists at Jenkem Labs,
I've been saving a lot of empty beer cans in my backyward, and I'm thinking of making a primitive furnace and forging some aluminium trucks. Have you experimented with this process before? Do you have any advice for forging my own trucks?
gblaneyful learn how to make a sand cast mold. Probly need to be a two part mold. Honestly dont even waste your time cuz aluminium does not grind well
Ah, yes, nihilism at its finest: Set your expectations low enough and even a failure can be called a success.
I like you guys more than thrasher officialy
WIN
More jenkem labs please
Are you selling these?
WHAT SONG IS THIS
Mmm land of chocolate🤤 😂😂
This dude is too funny. I also wanted to hate this video, but you can't.
Wow, splitfire!! 😂
came out perfect. i want to buy very much
this was so good
now I really wanna see how they’re made
Cheddar ruclips.net/video/U64j80P-Vl0/видео.html Happy birthday
Where can I buy one
That mould was so jacked. Should have used sculpting clay to form each half of it.
Let me get some jenkem and 3 wheels please.
The idea was there, but the execution...ya got heart though!
"what do you mean the safety glasses have to be on my eyes?"
So I did this awhile back with a little more care and actually made a skate-able wheel. check it out -> ruclips.net/video/mz4T7l2CHsg/видео.html
and since then I have perfected the process and made multiple sets of wheels and stated making a how to video -> ruclips.net/video/kFz1ug8JcYc/видео.html
Thought jenkem was a myth
Loved it
Try again in another vid this was sick!
Try to make bushings
Jenkem so fuckin sick
i think you did a great job!
Wheat bread doesn't need any new ideas Jenkem. Quit blowin up the hustle
Wheatberry's potato wheels were way better than this monstrosity.
Hardware in the microwave next?
Nice wheels. You wanna sponsor me? I'll ride & rep those.
Fuck the baby steps, I want to see a homemade complete
success!!!
is it really that easy.
the Walter white of skateboarding
now please use a potato as a wheel
Wheely good episode.
That wheel was straight fucked up hahahah
Good job
Here before this video blows up.
Everything about that technique was so wrong hahahaha
I hope this dude isn't a chemistry student or anything. Or even a high school graduate
Ever noticed how he resembles farris bueller
Vine por un poco de todo jjjja
awesome!
We did it
lol
you should have asked Wheatberry how to make wheels
bro the color of the wheel is actually dope if you guys can do a collab with spitfire in that color/material that would be FIRE
jenkem the place where you get el toro wrong. I left a comment on jenkem's website and immediately started receiving spam e-mails. Thanks for selling my e-mail, jenkem.
I may have contracted type 2 AIDS from this video
that was great
Fucking success
Cool guy
trucks next
B for blue
As someone whos into casting controller buttons, this hurt to watch
Being a mould maker for over 10 years, this was hard to watch.
Being an amateur mould maker for approximately a year and a half, I agree.
MrNickatron It wasnt by an expert but a dirtbag skater. What did you expect lol
Hahahaha
JENKEM isn’t core anymore cause this bozzo ripped it out!
should have used a potato!
this shit funny
haha, fun fun =]
Jajajajaj que risas me di con este tutorial
Your using a "cold-pour" polyurethane...skatewheels are not that
How the fast skaters do it ..... virgin olive oil GOAT. Next week on Jenkem labs how to replicate Scott Bournes blk out tatts with a nikko and a safety pin ...warning may send you to France to quit skating and become a poet and get into subversive art..
will putting oil on your wheels really make it faster, or just more slick?
Make that wheel out of a potato
No you did not and No it was not!!
haha tite
not a bad try
make your own trucks
Bruh
Umm.. Dope wheel bro.. 😒
Bro, im trying to show my children and you are cursing🤬.
Bill wiese.
Don't use satans language.