I'm still enjoying my IC-756 Pro3, after all these years! I'm not made of money (then or now), so i'm still in awe at how well this rig works with my TA-32 Junior and GAP vertical! But i'm still lusting over the FTDX-10, which I hope to add to the shack one day! I get the impression that it will blow away the Pro3, especially high QRM contest situations.
To cycle through the band stack registers, you can just push the band button, and then press in on the function button versus touching the screen again. This is easier and less likely to make a mistake.
Thanks! I actually hadn't tried that until you suggested it. Works like a charm. I have however set my rig up it in such a way that I have SSB mode and frequencies on VFO A and CW mode and frequencies on VFO B. Has been helpful to me.
I'm 6'2'' tall and I've got hands as big as shovels...my solution for pressing the buttons on the DX10 without touching the ring/vfo is to use a HB pencil with a rubber/ eraser on the end, I use the rubber ended pencil to button press like a stylus..far better than struggling with my sausage fingers. Work the problem to find the solution.
I keep a stylus handy for using rigs like IC-7300. Initially did this to prevent the touchscreen getting grubby but then I found it was also good for pushing the buttons. Sometimes wonder if front panels are just getting too small and fiddly. It's probably an age thing .
Thanks. I am going to order this radio today, but I was undecided about the 300 Hz roofing filter which I will now also purchase. I am a little worried about the small, close push buttons, but when I look at RF performance per dollar (USA), this radio seems to excel over all others.
Im new to Ham radio & just passed my Foundation.. This is my first radio had it for only 3 weeks & so far love it to bits. after doing the firmware update you can now add any wireless mouse (unlike before) & that's been a game changer to this radio, how quickly you can scroll through the frequency range with ease is just fantastic & can do most changes without having to ever touch the screen again.. just wish Yaesu would have done right click on the mouse for the function button or even band button.. but hopefully will be in another firmwear update.. great video thanks for the info... 👍
I use a soft tip stylus to push the buttons which works great. I also use it to move up and down the band quickly by touching the screen in the direction I want to go.
I have mine for almost 2Y. My impression is that some people are more concerned of the outlook of the radio and menus rather than the radio itself. I have my concerns about the ergonomics either, but this will not anyhow influence the decision to have this radio. When I operate, I do not change the band every second to have any trouble with the tight space around the button and as for the mode I don't change the mode at all. Before that I had FTdx-3000, it had much accessible keypad but the radio in FTdx-10 is at another level. 73 de LZ5RG
You'd think that they could change a couple of things in a software update to not make the band display menu disappear so quickly.(the update they came out with didn't seem to change that very much) I would also like more mouse functionality (such as mouse scroll wheel VFO tuning.) However, when it comes to quality, features, and affordability, Yaesu takes the cake! I do agree that it is a radio that grows on you the more you use it.
I've had my FTDX10 for a little over a year now, and absolutely love it. I'm so glad I didn't have a knee jerk reaction on the menu timing and ergonomics. At first, the my fingers would bump the big dial, but now I can push the buttons, even in the dark without worry, but it took a couple months of use to get me there.
Good summary of the ergonomics. I find myself forgetting that it’s easier to simply tap the frequency on the touch screen and typing in a frequency vs messing with the outer ring.
I made a "tune box" which allows me to press a button and allows a predetermined CW output carrier level to be emitted, I use this to do a manual tune as required. I originally used the tune box with the FT991A and modified the unit to work with the FTDX10 happy to email the details if you wish. The ergonomics, yes it takes a little to get used to it but I usually always have a mouse connected and that can make things a lot easier to deal with, if you get an opportunity to to use an FT710 with a mouse you'll find the radio is much more usable with the latest mouse UI enhancements add to the FT710, I am kinda waiting (wishing) for those mouse UI enhancements to be added to the FTDX10
Good point. As a relatively new ham, one of the first things I noticed with DNR "levels" was that it's not a linear scale. Each "level" just seemed to provide a different type of reduction to an increasing degree of effect as you went up the scale.
Had the Yeasu FTdx 10 for 10 months now and I have to say this is a heck of a HF rig. the way it can separate to signals close to the other I have never seen or heard before . I had a Icom 7300 and it was not even close to what you get with the FTdx10. I know the ic 7300 is a old hf rig being designed before 2015 so it make sense that the Ftdx10 that's 5 years newer design would outperform it. I'm extremely happy with the FTdx10 and there in no hf rig I can see buying until icom tries to make the next hf rig to compete with the FTdx10. cheers.
Great informative video. I heard people complaining about big fingers and the band button but did not understand why. ......and now I know. Band Stacking Registers.....I turned mine off. I got tired of cycling through each register to change modes. I now use the mouse to click on the VFO icon and then use it to change modes. Much faster and easier. I wish you could click on the MHZ numbers to change bands. For sending a carrier I use the mouse to change to the RTTY mode and then key the mic. I have the FT-710 and really like it. I am thinking of getting the 10. The 710 has a funky way of addressing the RIT / XIT. Thanks for posting the very informative video. Barry, KU3X
Hi LB3SA, thanks for your valuable observations ! What makes me happy is to know that the YAESU staff pays always high attention, so hopefully in the next rig that little, but annoying flaw will be resolved ! Possibly by means of an ergonomic remote command unit ??!! 73 to all Hams ...
Many thanks for a great video on the FTDX10 transceiver. I have had mine for just over a year now, and can say, they certainly do need a bit of getting used to. Overall, this transceiver has more than met my expectations, it does have a great many features packed into a relatively small radio. Yes, the firmware update from Yaesu did give an extra few seconds for band selection, which was very nice. The problem I used to have was, once I had pressed the band selector switch, and moved my hand across to the screen, the band selection screen would always seem to disappear at the precise moment my finger tip touched the screen, this of course would change my frequency to some other. I do, as do many others, a touch screen stylus for all operations on the FTDX10. I still have my FT991a, it has a few nice features as standard, that much more expensive equipment doesn’t have. It has a carrying handle, and to me, a very important consideration, backlit push buttons. The only other transceiver, other than the FT991a to have this function with my own station are the good old TS 2000X. But, you can’t win ‘em all. 73 all.
Backlit keys add a lot of covenience and a nice look to tech devices that are often used in low light conditions. I wonder why it is not used more often on these kind of gear. You get backlight with the cheapest Baofeng radios, so it can´t be that much rocket science.
I think it's a great radio! I've had it about 9 months now and I'm still learning some of the features. I wish Yaesu would make the duration of the menus user configurable, as they do with the splash screen when you power on the rig. As a new user menus disappear much too quickly.
I never gave it a second thought about selling - I was aware of the "warts n all" element of the rig. From a receiver perspective it's in a class of it's own and that's from a none Yaesu fan! The only 2 things I don't like is the size (another mans meat is another poison) and the crowded space around the VFO specifically the 'Band' button' comparing the weight with a Kenwood TS570 it is a complete lightweight. DNR and NB are quite superb, filters on CW are just something else and I did not feel the need to buy the additional roofing filter. It's fair to do a comparison with the FT5000. Am I tempted to upgrade NO, my usage does not dictate the need for a second receiver. I have used the new FT101 and I'll stick with the FTdx10 unless I get the opportunity at a very silly price. It really has set the bar quite high. Great and useful vid thanks for the time and effort to post. 73 Mike
Fair enough. The lack of a TUNE button for adjusting a transmatch or linear amplifier is a deal breaker for me, especially on a small radio that could easily go portable. Kenwood does it. TenTec had it. Enough about that. Nice video, well presented with good narration and good illustration on screen. Thank you.
I have the FTdx10 and have guitar fingers so no problem. Getting back into CW so the suggestion of a roofing filter is very appealing Thanks for your Video 73!
There is a Tune button to the left of the display. I have seen other videos where the operator was using this to trigger an external tuner. I guess its reconfigurable.
Yes, you can trigger an external tuner. But you can't send a continous carrier to f.ex. an external tuner that isn't compatible with Yaesu. This isn't a huge deal tho. Not many operators needs this function.
Thanks for this interesting review. I think the missing Tuning Button can be fixed. On the rear of the radio there is the multipin connector for a Linear. You might use a pushbutton between TXREQ and ground. The TRX should switch to CW, reduce Power to 10W and transmit as long as you press this switch. The FT-2000/FT-5000 has a dedicated rca socket for this and I‘m using a footswitch so I can have both hands free for tuning my PA and the antenna coupler.. Hope this works similar with the FT-DX10 73 de DL5FJW
I've had the 10 since the Hamvention weekend last May. So far I've used it on digital modes and a little CW. I agree with you about the APF peak filter on CW. I don't use any DNR on CW. I have the APF set to narrow. This increases the ringing a little but still usable. Also have the 300 Hz roofing filter but don't always need it. I've never used my 10 on SSB, nor any other radio for several years now. I find DNR helps more on SSB. Also use Win4Yaesu to control the 10 from my PC. It eliminates the need to press the crowded buttons on the front panel. But not everyone is going to like that solution.
For tuning, I just turn the keyer off in the main function menu, then touch my paddle and it sends a tone like a straight key. As long as BK-IN is on, it automatically keys the radio with a solid CW tone.
I have equipped several Yaesu transceivers with a TUNE function. Wire up a push button switch with 3' or so of two conductor cable. Connect one wire to TX RQ IN pin and the other to GND pin of the LINEAR jack on the rear of the FTDX10. When you push the button, the transceiver will output 100 watts or whatever level you have the output power set to.
Just noticed your video on here, so a bit late to the party. Part of the For-Sale issue is the lack of a TUNE button. The tune is simple lack of information. The problem is not a problem. Punch the VFO icon, select RTTY and squeeze the mic button. You get what ever power output you have set on the main menu. Best to put the amp to stand-by but whatever floats your boat I guess. There is no involved or sneaky work around, yadda, yadda as I see claimed on the net. Tap VFO, tap RTTY and tune away. 73
Thanks for the content, very smart review. Question: are you a big man, do you have big hands? I keep hearing about this design issue for those with bigger hands, but mine are very small. Do you estimate someone with smaller hands would have less of a problem with this issue?
With my FTdx3000, I mounted a momentary pushbutton in a small box and connected it to the Tx Req In pin on the rear panel LINEAR plug. In any mode, I can press that button to get a steady carrier and releasing it returns everything to the previous mode/settings. One can select between 10/20/50/100 watts, via Menu #178. I find 10 or 20 watts is more than adequate to dial in my tuner and/or amplifier. I'm sure the very same thing is possible on the FTdx10.
Maybe put a small rubber bumper on the top of the band button to elevate it out of the crevice? Not optimal, but could help with the errant control changes.
For txing a CW tone try pressing function button then turn the keyer off which will enable you to send a constant tone via your paddle key. Once tuned simply turn the keyer back on and away you go. Hope this helps OM.
I originally purchased the 991, but I ended up getting the FTDX10, then later the FTM-300 after not hearing any dstar in my area. I had an icom-7100 but after I watched a few Yeasu videos I started to replace my icoms with Yeasu as fusion is more popular than dstar, and I had zero intrest with what I was hearing on my hotspot. I still have my 7100 in a go box, and an icom 4100 as a hot spare that I'll shortly start to do Winlink and APRS igate once I get my cables. Icom is great and I do still like them but it's about what works in my area and the digital modes I want to use.
Yup - agree with you. I also have some Icom radios, and love them too. As my wife says when she buys dresses: "I love them all, but for different reasons". Only thing is that it gets expensive .... 😅
What works best for me to switch bands, and maybe the design is actually intended that way, is using my right hand, put my fingers around the inner dial, push the band button with my thumb and then turn the dial to select the band. It takes a little getting used to. DNF , or lack thereof, was always my biggest complaint with the IC-7300. On pretty much every Yaesu radio use the RF gain and pull a curtain over the noise, which makes it so nice to listen to, as long as the signal is a little louder than the noise floor.
Omg thank you so much I kept wondering why my NB noise blanker button when pressed I never noticed any difference lol now I understand why lol never realised you can adjust it like that. Thanks I will try it this evening on my radio.
@techstuffandmore I paused the video and commented to soon . There's actually other things I learned as well from your video about the BAND switch I wondered why my radio changed from fm to ssb sometimes when I change band just thought it was a glitch lol
Your English speaking is fantastic ,I worked in Haugesund and im sure the locals could speak good english but never bothered .Any how good video i intend getting this radio for my campervan ,
I've had mine about a year now and really enjoying it and also getting back on HF after a whole off air, really the only clunky thing about it is the band and mode selection but it isn't a deal breaker.
Great overview! This may seem like a ridiculous gripe, but after some time behind my 705, I can't express how much I prefer the waterfall with the averaging. It seems to the layman a simple thing to fix, will they ever do it?
Ergonomics and waterfall - Icom! APF, Contour, filters - Yaesu! This FTDX-10 improves a lot of ergonomics compared to my trusty FT-991A, which is an ergo-pain, but I still like it... Very solid radio, just using the features is far from comfort.
I agree as regards the waterfall/scope. I recently traded in my year old Kenwood TS-890S which I loved and went back to a FTDX-101MP but do miss the clarity of the waterfall/scope that the Kenwood had. Without averaging the Yaesu screen looks way too “busy” compared to the TS-890s, Icom IC-7300, IC-7610 etc. Fingers crossed that a firmware update maybe on the horizon if enough of us complain!! Hi. All the best de M0TLB.
Honestly the band scope is one of the few things keeping me from jumping on a FTDX101D. The lack of averaging options is a pretty big deal to me. Another superficial point that bothers me more than it probably should is the lack of color and appearance customization. ICOM does a fantastic job, allowing you to configure the scope with the colors, style and averaging level you prefer. They come as close as anyone to what you get from the premier SDRs from Flex and Apache Labs. Lastly, I think the 3D waterfall is stupid. There, I said it.
One point that many people miss is that sometimes the price of the dx10 is only 100 more than the 991A - which the dx10 has much more bells and whistles. I know, the dx10 has no V/UHF - but you get over that very quickly.
Great Video, My band button lettering is fading, which is annoying and yes agree, buttons far too close to inner ring, I have to say, I am very impressed by its receive and NR features
Thank you for the great video on the FTdx10 . I also have had mine for a year now after selling my Ft-991A. I really enjoy my DX10. I use a soft tip stylus pen the enter the frequency directly on the touch screen. I also use the stylus to change bands, modes, and pretty much everything else too. You can even use the soft tip to press the buttons manually if you choose. The only thing that I really wish that Yaesu would have done is to backlight the buttons. 73 KT4RAM
So you have the mic in one hand, pen in the other hand for notes, both hands on a keyboard AND hold a stylus. Tried that with the 7300 and it's just a PITA.
Tune button, press and hold for 1 second to tune? About the only gripe I have is the menu duration, I'm still learning my way with my FTDX10 and I find I have to open a menu twice because by the time I've worked out what to set/change/un-set the menu has vanished. Wish it was configurable or at least possible to switch off the 'feature'. Performance wise, I've not hooked it up to my test gear (yet, I've no doubt it will meet the specs) but I find the DNR/NB are superb, helping me weed out signals my old Icom doesn't even know exist. I'm really happy with it, I'm really unhappy with the small amount of time I get to play with it.
Great video thank you. To get a carrier tone I just just hit function then turn off the keyer.. Using the the key then sends a solid tone. Its not as simple as what you want but its easier then going into the menus.
A year in the FTDX10 is still competitive --just recently picked one up because its the only one that works due to the high QRN factor near where I live in addition to living near an FM Radio transmitter. TBH I would do anything to switch from the FTDX10 to the FTDX5000 - because of supply shortages many times these days newer produces are worse then their older counterparts... I feel, personally.... I wish my 705 could handle the noise but it can't!! Yeasu filtering and Digital Noise Reduction is simply - best in class. So yeah - its a great radio, it is crammed with buttons.
I'd love to have a FT-5000, but I don't even know how to use all the features on my FT-2000 yet. I'm trying to decide between the FTdx-3000 and the FTdx-10 as my next addition. I'd like something with shortwave capability, but think I'd be better to get a Tecsun or Eton for that purpose due to portability (throwing in the go bag or back seat).
Perhaps installing a smaller diameter function knob, along with gluing an extension to the band button such that it extends out past the outer ring would help those with big fingers. It's too bad that the rig needs this kind of mod in the first place. I'm a "function-before-form" type of guy, and hardly anything suits me that can't be improved with some modification. MY old FT-902DM has a good APF that works wonders with a weak signal.
you cannot compare a radio for expeditions or portable operation with such a monster and a piece of furniture as the 5000, and you also need to remember the price of both devices, when even today the 5000 is sold for the price of two FTDX. Unfortunately, it is true that the ergonomics of the FTDX are tragic, but the receiver is TOP :) It's as if they've forgotten that there are also nations that don't have little fingers, but this has been repeated for the umpteenth time and I doubt that it will ever change with Yaesu, the solution is to control TCVR via mouse on external monitor.
The same feelings as you, but I choose to keep it by my side. I also have the FTDX-5000MP as you mentioned FTDX-10 performance is quite similar to FTDX-5000MP, YES, it is one of two reasons why I keep it and the rest reason is I can find other brands of radio who can compete. I did plan Kenwood TS-590SG or TS-890, but they are too expensive for collection( yes, just for collection only). Yaesu really did a mistake with the placement of the button, anyway I forgive them already and I plan DIY a smaller "F" button for my bigger/fatty finger.
I would like to see an update of the 991A. I like the added 2/440 coverage but the radio is probably a generation behind the FTDX10 in performance and features.
As soon as I saw the front panel I knew where the issue was likely to be! My absolute pet hate is a cluster of buttons around a vfo knob. Apart from bumping the vfo during operation, I can see that issue being irritating. PLUS being right handed the band button is on the wrong side. I can understand why they're unpopular. I wonder, Are there programmable function buttons on the mic that can serve as the function button? I built a mic for my Kenwoods that has 6 programmable buttons. VERY useful. 73 de GØUSL
On the fence weither to buy the FTdx10 or go back to the 710 which I tried out for a month. I liked the 710 but I know the filters are much better on the 10 along with easier to access-friendlier functions. I also learned that using a HDMI converter for DVI for external causes a fuse/circuit to blow requiring service to the unit to have it repaired... the 710 has a self resetting one. One of my biggest dislikes on the 710 was having to go into the menu to change contour, notch etc.. and have just a couple seconds before it kicked you back out only having to start over again. Adjusting the DNR ..same issue. I really want to like the 991A, but everyone has told me that it just can't stand up against the 10. I do like how the 991 is layed out. I have also been told that the 10 is to big to use portable.. but a couple inches and 3 pounds difference, is that really a big deal?
I never touch the screen so I use a stylus or a mouse. If I click buttons I usually use the back end of the stylus. My complain it that we can use a mouse but there is no way to open the band select or the menu using a mouse. It would be easy for them to update firmware to give you a menu with a right click with a mouse for band and menu. Or even a touch icon to click on screen.
Great insight. From purely a function/menu/display perspective do you have experience with the IC-7300 to compare the FT-DX10 to? I have a FT-818ND for manpack/POTA/SOTA style but im now shopping for a shack rig that could double duty in car-based/front range style POTA/mobile. Thank you in advance.
It does seem like a major design flaw if you ask me. The Yaesu radios also seem to be very heavy compared to the equivalent Icom. If they could redesign the front panel for any future product that replaces this they will be onto a winner.
Hardly major as it doesn't affect the functionality, it simply presents some users with a sub-optimal UX, but I agree it would be good for it to be addresses.
I have found that using a #2 pencil eraser to push the function buttons around the dial makes it a lot easer to keep my fat fingers from moving the dial.
Great rig but I sold mine because of the ergonomics. I think I had for 2 years, but too many problems. The love never started from day 1. I returned back to my old rig I had for 30 yrs.
A year later here. My DX10 remains working like new in spite of being bounced around in the RV for 15,000 miles over the past 3 years. I do agree that the Band button should have been reversed with the CS button as the Band is used constantly and the CS not so much. It may be that a firmware upgrade could do that. I use the DX101MP at times and I never find it to be better than the DX10. The 101 menu system is not logical. The 10 is simple and logical.
it is a pity they didn‘t put band and mode one level up to where qmb and split(i guess?) is. for tuning: i set CS to power, so i now can press cs and use the outer dial to set power quickly to 12-15watts and then I just whistle into the mic so i don‘t need to change mode from ssb away.
I’ve ran mine for a year now. Mainly all Cw. One of the best Cw rigs available for certain. One of the biggest draw backs of the dx10 is the scope averaging. It has a fiddly scope. You really have to play with the levels to find out how it works. I use 2d fall. Hated the 3D. No tune button sadly. I wish they would’ve put this radio inside of the 3000 so we’d have more finger room. For the money at the time it’s the best Cw rig I could find. What amp do you run with your 10? I’ve been using the als600 but looking for a bigger amp.
Yes perhaps Yaesu might in their next FW update create a link to the band screen by touching the frequency on the display just like an ic7300. It can be done because they already have it activated for the mode button on the ftdx10. Yaesu....I hope you are listening please..
Appreciate this review. I had noticed that some were being returned. I figured it was because of the buttons being too close to the tuning knob. Pretty silly when you can just lock it in place. Its an incredible radio. That receiver is out of this world. Hopefully this is a radio that is well made and will last for a number of years. You did a very nice job with this review. 73. Joe
It's all about fit. There are a lot of great radios out there and people listen to other people's sales pitch and then find out the radio doesn't fit them. Dockers is a great brand of pants but if you don't get the right size they are useless. Fit is one of the most important features in a radio that is never talked about. Go to a brick and mortar or a hamfest and spin the dial on several models and see what fits your needs.
The other reason people have been returning them is they are plugging in the wrong monitor for seeing a larger display and burning out a board in the radio.
Another way to tune is simply push the function button and turn the keyer off. Then your straight key or paddle will simply work like a normal straight key. I generally either do that or throw the rig into am and key up. Sold my 7610 and replaced it with the ftdx 10. Much better rig
I’ve had mine for about a week. I love the radio and people returning it because their fingers are too fat, That’s like super petty. I love the radio I see you compared it to a 5000 which is pretty close I compared to one 101 just a mini or version but I love the radio and if people return it because their fingers are too fat that’s nuts to each his own 😂
Q: could this radio be set up with 1.830cw in memory ch1 1.920ssb in memory ch2 1.960 rtty in memory ch3 (for your tune ) 3.560 cw in memory ch 4 .....a ... 28.060cw .......... ch 30 28.500 usb .......ch 31 And so on and so on then just tune from the desired memory ch just like a band stack rather than vfo a/b This is how I use my icom ic 7300 it is much better for easy of use ? So I am always on memory mode and just turn the multi wheel as a band/ mode running up and down to desired band and mode ,then adjust the vfo to desired frequency. I find this works great . Would this work on the ftdx10 ? I know it did not work very well on my ftdx 3000 which was very frustrating. Any thoughts /advice. Thanks MM0UDI.
I got the DX10 after a few hrs of using I just found too meny flaws . I dont have a big hands but every time i need to used a fuction on those more than 10 buttons located around vfo I end up in a diferent frecuency . That is bad enought not to buy the DX10 but you will find other serious issues some of them shared by the of latest Dx line including the Dx 101 . pan adpater osciloscope are a joke useless . There not used and you have to ajuste it level etc.Gosh it is a waste. Selecting a mode is a race to be the screen timer but if you are asking for a function located on the right side of VFO you are going to get frustated trying to beat the short 3 seconds to change or selet a mode . Now when come to weak signal DNR on NB you are not going to like any of the 3 audio situations to adjust a fuction the race is on . The DNR just dont work right . Here is what you are going t o face 1" gloglo"audio you will have hard time to understand even under 5 level of DNR 2 -noise vs oudio , if you have a decent signal but noise is high using the DNR Leadsl to a robotic audio or not using the DNR and deal with the white noise. 3 - on weak signal the dame DNR induce a vitual QSB defeting the whole purpose to use The DNR .you are in not win situation. CW is not bad because you handking a single tone. I RETURES THE POS dx10 for something better like 7610 . I Rest my case I DONT ane a raduo full of menu to operate ans it have to come with pencil to operate . You waste more time dealing with menu after menu and flaws than enjoying a QSO Olny the 101 is nice and simple to operate , osciloscope are a joke also.
A friend locally was on the verge of sending his back the very first day he had it due to the excessively fast BAND menu, I did the firmware update for him which helped. He has lent me the radio for a few months to try, unlike him I am happy to use CAT control a lot. It is a great performing radio, but I am not yet used to the ergonomics. It has made me want an FTDX101 however! Update: Despite some issues I did subsequently buy an FTDX101MP, most of the time I navigate the menus with a USB mouse.
The form factor is why I sold it. Too small for my hands and too little gain over my ICOM9100. The radio I would be all over is a IC7310 with display output. Are you listening ICOM???
I think you will be in the minority with your personal comment, but if that is your personal view so be it. The rest if the HAM world think this is an excellent radio. Agreed there are some items that could have been better executed in the design. But on balance it’s a real upgrade from those radios of 20 years ago. Enjoy your radio which ever rig and mode of operation. Best regards Steve
People with big hands/thick fingers, have returned theirs. This doesn't mean that all people with big hands doesn't want to use this radio, but it might be worth while checking before you buy.
Hei, jeg er fornøyd med dx10. Men, hehe, greien er jo det at jeg ikke har hatt transiverere før til å sammenligne. Fikk lisensen for nøyaktig 1 og et halt år siden. Det er en flott radio. LB8DJ
😂😂😂exactly for this Reason i bought the FTDX101. I have fat Fingers... But I´m sure the FTDX10 is a exellent Radio. How to Tune you can try this, Go to CW Mode, turn "BK in " on and then push the Mox Button. At the 101 it works, so i think it would work with the 10 too, because the Radions are very similar. in the Software. 73´s DB4WD Guido
I'm still enjoying my IC-756 Pro3, after all these years! I'm not made of money (then or now), so i'm still in awe at how well this rig works with my TA-32 Junior and GAP vertical! But i'm still lusting over the FTDX-10, which I hope to add to the shack one day! I get the impression that it will blow away the Pro3, especially high QRM contest situations.
Nothing wrong with the older rigs. I just ordered a DX10 but still love my Kenwood Ts-980SD.
To cycle through the band stack registers, you can just push the band button, and then press in on the function button versus touching the screen again. This is easier and less likely to make a mistake.
Thanks! I actually hadn't tried that until you suggested it. Works like a charm. I have however set my rig up it in such a way that I have SSB mode and frequencies on VFO A and CW mode and frequencies on VFO B. Has been helpful to me.
I'm 6'2'' tall and I've got hands as big as shovels...my solution for pressing the buttons on the DX10 without touching the ring/vfo is to use a HB pencil with a rubber/ eraser on the end, I use the rubber ended pencil to button press like a stylus..far better than struggling with my sausage fingers. Work the problem to find the solution.
Sounds like you found a good solution. Thanks for sharing!
I have the same problem... size 14 ring finger.. I had, like you, already discovered that a stylus solves problems on today's small rigs ..
I was going to say this, but the top comment lol.
Does it use silent pin diode or clack click relay in QSK full breakin cw mode ? Seems great rig for cw with roof filter but how about silent sending ?
I keep a stylus handy for using rigs like IC-7300. Initially did this to prevent the touchscreen getting grubby but then I found it was also good for pushing the buttons. Sometimes wonder if front panels are just getting too small and fiddly. It's probably an age thing .
Thanks. I am going to order this radio today, but I was undecided about the 300 Hz roofing filter which I will now also purchase. I am a little worried about the small, close push buttons, but when I look at RF performance per dollar (USA), this radio seems to excel over all others.
Im new to Ham radio & just passed my Foundation.. This is my first radio had it for only 3 weeks & so far love it to bits. after doing the firmware update you can now add any wireless mouse (unlike before) & that's been a game changer to this radio, how quickly you can scroll through the frequency range with ease is just fantastic & can do most changes without having to ever touch the screen again.. just wish Yaesu would have done right click on the mouse for the function button or even band button.. but hopefully will be in another firmwear update.. great video thanks for the info... 👍
I use a soft tip stylus to push the buttons which works great. I also use it to move up and down the band quickly by touching the screen in the direction I want to go.
I have mine for almost 2Y. My impression is that some people are more concerned of the outlook of the radio and menus rather than the radio itself. I have my concerns about the ergonomics either, but this will not anyhow influence the decision to have this radio. When I operate, I do not change the band every second to have any trouble with the tight space around the button and as for the mode I don't change the mode at all. Before that I had FTdx-3000, it had much accessible keypad but the radio in FTdx-10 is at another level. 73 de LZ5RG
You'd think that they could change a couple of things in a software update to not make the band display menu disappear so quickly.(the update they came out with didn't seem to change that very much) I would also like more mouse functionality (such as mouse scroll wheel VFO tuning.) However, when it comes to quality, features, and affordability, Yaesu takes the cake! I do agree that it is a radio that grows on you the more you use it.
I've had my FTDX10 for a little over a year now, and absolutely love it. I'm so glad I didn't have a knee jerk reaction on the menu timing and ergonomics. At first, the my fingers would bump the big dial, but now I can push the buttons, even in the dark without worry, but it took a couple months of use to get me there.
Excelent suggestion for the 300Hz Roofing filter.
I'm planning to acquire the radio in the next two months.
Subscribed!
Good summary of the ergonomics. I find myself forgetting that it’s easier to simply tap the frequency on the touch screen and typing in a frequency vs messing with the outer ring.
I made a "tune box" which allows me to press a button and allows a predetermined CW output carrier level to be emitted, I use this to do a manual tune as required. I originally used the tune box with the FT991A and modified the unit to work with the FTDX10 happy to email the details if you wish.
The ergonomics, yes it takes a little to get used to it but I usually always have a mouse connected and that can make things a lot easier to deal with, if you get an opportunity to to use an FT710 with a mouse you'll find the radio is much more usable with the latest mouse UI enhancements add to the FT710, I am kinda waiting (wishing) for those mouse UI enhancements to be added to the FTDX10
Great video! One comment on DNR - it is not “levels” per se, but different types of filters for different types of noise.
Good point. As a relatively new ham, one of the first things I noticed with DNR "levels" was that it's not a linear scale. Each "level" just seemed to provide a different type of reduction to an increasing degree of effect as you went up the scale.
Had the Yeasu FTdx 10 for 10 months now and I have to say this is a heck of a HF rig. the way it can separate to signals close to the other I have never seen or heard before . I had a Icom 7300 and it was not even close to what you get with the FTdx10. I know the ic 7300 is a old hf rig being designed before 2015 so it make sense that the Ftdx10 that's 5 years newer design would outperform it. I'm extremely happy with the FTdx10 and there in no hf rig I can see buying until icom tries to make the next hf rig to compete with the FTdx10. cheers.
Great informative video. I heard people complaining about big fingers and the band button but did not understand why. ......and now I know.
Band Stacking Registers.....I turned mine off. I got tired of cycling through each register to change modes. I now use the mouse to click on the VFO icon and then use it to change modes. Much faster and easier. I wish you could click on the MHZ numbers to change bands.
For sending a carrier I use the mouse to change to the RTTY mode and then key the mic.
I have the FT-710 and really like it. I am thinking of getting the 10. The 710 has a funky way of addressing the RIT / XIT.
Thanks for posting the very informative video.
Barry, KU3X
L
Hi LB3SA, thanks for your valuable observations ! What makes me happy is to know that the YAESU staff pays always high attention, so hopefully in the next rig that little, but annoying flaw will be resolved ! Possibly by means of an ergonomic remote command unit ??!!
73 to all Hams ...
Many thanks for a great video on the FTDX10 transceiver. I have had mine for just over a year now, and can say, they certainly do need a bit of getting used to. Overall, this transceiver has more than met my expectations, it does have a great many features packed into a relatively small radio. Yes, the firmware update from Yaesu did give an extra few seconds for band selection, which was very nice. The problem I used to have was, once I had pressed the band selector switch, and moved my hand across to the screen, the band selection screen would always seem to disappear at the precise moment my finger tip touched the screen, this of course would change my frequency to some other. I do, as do many others, a touch screen stylus for all operations on the FTDX10. I still have my FT991a, it has a few nice features as standard, that much more expensive equipment doesn’t have. It has a carrying handle, and to me, a very important consideration, backlit push buttons. The only other transceiver, other than the FT991a to have this function with my own station are the good old TS 2000X. But, you can’t win ‘em all. 73 all.
TS2000 was (is) awesome, despite the potbelly stove look. Was in production for no less than 18 years, so no doubt a success for Kenwood.
Backlit keys add a lot of covenience and a nice look to tech devices that are often used in low light conditions. I wonder why it is not used more often on these kind of gear. You get backlight with the cheapest Baofeng radios, so it can´t be that much rocket science.
I think it's a great radio! I've had it about 9 months now and I'm still learning some of the features. I wish Yaesu would make the duration of the menus user configurable, as they do with the splash screen when you power on the rig. As a new user menus disappear much too quickly.
I agree. That would've been nice.
I never gave it a second thought about selling - I was aware of the "warts n all" element of the rig. From a receiver perspective it's in a class of it's own and that's from a none Yaesu fan! The only 2 things I don't like is the size (another mans meat is another poison) and the crowded space around the VFO specifically the 'Band' button' comparing the weight with a Kenwood TS570 it is a complete lightweight. DNR and NB are quite superb, filters on CW are just something else and I did not feel the need to buy the additional roofing filter. It's fair to do a comparison with the FT5000. Am I tempted to upgrade NO, my usage does not dictate the need for a second receiver. I have used the new FT101 and I'll stick with the FTdx10 unless I get the opportunity at a very silly price. It really has set the bar quite high. Great and useful vid thanks for the time and effort to post. 73 Mike
Did you do any of the older radios the new ones just confused me I’m 85 years old and I have a terrible time with them so thank you and God bless
Great video! What power supply are you using there (visible @1:53)?
Fair enough. The lack of a TUNE button for adjusting a transmatch or linear amplifier is a deal breaker for me, especially on a small radio that could easily go portable. Kenwood does it. TenTec had it. Enough about that.
Nice video, well presented with good narration and good illustration on screen. Thank you.
I have the FTdx10 and have guitar fingers so no problem. Getting back into CW so the suggestion of a roofing filter is very appealing Thanks for your Video 73!
Thanks! 73
There is a Tune button to the left of the display. I have seen other videos where the operator was using this to trigger an external tuner. I guess its reconfigurable.
Yes, you can trigger an external tuner. But you can't send a continous carrier to f.ex. an external tuner that isn't compatible with Yaesu. This isn't a huge deal tho. Not many operators needs this function.
🙄
Thanks for this interesting review. I think the missing Tuning Button can be fixed. On the rear of the radio there is the multipin connector for a Linear. You might use a pushbutton between TXREQ and ground. The TRX should switch to CW, reduce Power to 10W and transmit as long as you press this switch. The FT-2000/FT-5000 has a dedicated rca socket for this and I‘m using a footswitch so I can have both hands free for tuning my PA and the antenna coupler..
Hope this works similar with the FT-DX10
73 de DL5FJW
I've had the 10 since the Hamvention weekend last May. So far I've used it on digital modes and a little CW.
I agree with you about the APF peak filter on CW. I don't use any DNR on CW. I have the APF set to narrow. This increases the ringing a little but still usable. Also have the 300 Hz roofing filter but don't always need it.
I've never used my 10 on SSB, nor any other radio for several years now. I find DNR helps more on SSB.
Also use Win4Yaesu to control the 10 from my PC. It eliminates the need to press the crowded buttons on the front panel. But not everyone is going to like that solution.
For tuning, I just turn the keyer off in the main function menu, then touch my paddle and it sends a tone like a straight key. As long as BK-IN is on, it automatically keys the radio with a solid CW tone.
I have equipped several Yaesu transceivers with a TUNE function. Wire up a push button switch with 3' or so of two conductor cable. Connect one wire to TX RQ IN pin and the other to GND pin of the LINEAR jack on the rear of the FTDX10. When you push the button, the transceiver will output 100 watts or whatever level you have the output power set to.
Just noticed your video on here, so a bit late to the party. Part of the For-Sale issue is the lack of a TUNE button. The tune is simple lack of information. The problem is not a problem.
Punch the VFO icon, select RTTY and squeeze the mic button. You get what ever power output you have set on the main menu. Best to put the amp to stand-by but whatever floats your boat I guess.
There is no involved or sneaky work around, yadda, yadda as I see claimed on the net. Tap VFO, tap RTTY and tune away. 73
Thanks for the content, very smart review. Question: are you a big man, do you have big hands? I keep hearing about this design issue for those with bigger hands, but mine are very small. Do you estimate someone with smaller hands would have less of a problem with this issue?
With my FTdx3000, I mounted a momentary pushbutton in a small box and connected it to the Tx Req In pin on the rear panel LINEAR plug. In any mode, I can press that button to get a steady carrier and releasing it returns everything to the previous mode/settings. One can select between 10/20/50/100 watts, via Menu #178. I find 10 or 20 watts is more than adequate to dial in my tuner and/or amplifier. I'm sure the very same thing is possible on the FTdx10.
Great info, Thanks! I just found a used FTDX10, I can't wait to play with it!
Maybe put a small rubber bumper on the top of the band button to elevate it out of the crevice? Not optimal, but could help with the errant control changes.
For txing a CW tone try pressing function button then turn the keyer off which will enable you to send a constant tone via your paddle key. Once tuned simply turn the keyer back on and away you go. Hope this helps OM.
I originally purchased the 991, but I ended up getting the FTDX10, then later the FTM-300 after not hearing any dstar in my area. I had an icom-7100 but after I watched a few Yeasu videos I started to replace my icoms with Yeasu as fusion is more popular than dstar, and I had zero intrest with what I was hearing on my hotspot. I still have my 7100 in a go box, and an icom 4100 as a hot spare that I'll shortly start to do Winlink and APRS igate once I get my cables. Icom is great and I do still like them but it's about what works in my area and the digital modes I want to use.
Yup - agree with you. I also have some Icom radios, and love them too. As my wife says when she buys dresses: "I love them all, but for different reasons". Only thing is that it gets expensive .... 😅
Oh also… if you operate with a computer/laptop connected - Yaesu4Win is excellent as a way to control features of the rig from the computer screen.
What works best for me to switch bands, and maybe the design is actually intended that way, is using my right hand, put my fingers around the inner dial, push the band button with my thumb and then turn the dial to select the band. It takes a little getting used to. DNF , or lack thereof, was always my biggest complaint with the IC-7300. On pretty much every Yaesu radio use the RF gain and pull a curtain over the noise, which makes it so nice to listen to, as long as the signal is a little louder than the noise floor.
Omg thank you so much I kept wondering why my NB noise blanker button when pressed I never noticed any difference lol now I understand why lol never realised you can adjust it like that. Thanks I will try it this evening on my radio.
Glad I could help!
@techstuffandmore I paused the video and commented to soon . There's actually other things I learned as well from your video about the BAND switch I wondered why my radio changed from fm to ssb sometimes when I change band just thought it was a glitch lol
Your English speaking is fantastic ,I worked in Haugesund and im sure the locals could speak good english but never bothered .Any how good video i intend getting this radio for my campervan ,
I've had mine about a year now and really enjoying it and also getting back on HF after a whole off air, really the only clunky thing about it is the band and mode selection but it isn't a deal breaker.
Great overview!
This may seem like a ridiculous gripe, but after some time behind my 705, I can't express how much I prefer the waterfall with the averaging. It seems to the layman a simple thing to fix, will they ever do it?
Ya - I heard others mention the same thing. I haven't missed it, but I understand why it could be nice. And should really be an easy fix.
Ergonomics and waterfall - Icom! APF, Contour, filters - Yaesu! This FTDX-10 improves a lot of ergonomics compared to my trusty FT-991A, which is an ergo-pain, but I still like it... Very solid radio, just using the features is far from comfort.
I agree as regards the waterfall/scope. I recently traded in my year old Kenwood TS-890S which I loved and went back to a FTDX-101MP but do miss the clarity of the waterfall/scope that the Kenwood had. Without averaging the Yaesu screen looks way too “busy” compared to the TS-890s, Icom IC-7300, IC-7610 etc. Fingers crossed that a firmware update maybe on the horizon if enough of us complain!! Hi. All the best de M0TLB.
Honestly the band scope is one of the few things keeping me from jumping on a FTDX101D. The lack of averaging options is a pretty big deal to me. Another superficial point that bothers me more than it probably should is the lack of color and appearance customization. ICOM does a fantastic job, allowing you to configure the scope with the colors, style and averaging level you prefer. They come as close as anyone to what you get from the premier SDRs from Flex and Apache Labs. Lastly, I think the 3D waterfall is stupid. There, I said it.
One point that many people miss is that sometimes the price of the dx10 is only 100 more than the 991A - which the dx10 has much more bells and whistles. I know, the dx10 has no V/UHF - but you get over that very quickly.
Great Video, My band button lettering is fading, which is annoying and yes agree, buttons far too close to inner ring, I have to say, I am very impressed by its receive and NR features
Thank you for the great video on the FTdx10 . I also have had mine for a year now after selling my Ft-991A. I really enjoy my DX10. I use a soft tip stylus pen the enter the frequency directly on the touch screen. I also use the stylus to change bands, modes, and pretty much everything else too. You can even use the soft tip to press the buttons manually if you choose. The only thing that I really wish that Yaesu would have done is to backlight the buttons. 73
KT4RAM
Thanks for sharing
So you have the mic in one hand, pen in the other hand for notes, both hands on a keyboard AND hold a stylus. Tried that with the 7300 and it's just a PITA.
@Two Hands and a Radio What's a 7300? 😆 Don't have to hold a mic with a Heil Foot Switch and the PR-781 is on a boom. Works out great for me.
You must be a genius!...................You think like I do!.................... I use a microfiber tipped stylus for the touchscreen and buttons.
Tune button, press and hold for 1 second to tune?
About the only gripe I have is the menu duration, I'm still learning my way with my FTDX10 and I find I have to open a menu twice because by the time I've worked out what to set/change/un-set the menu has vanished.
Wish it was configurable or at least possible to switch off the 'feature'.
Performance wise, I've not hooked it up to my test gear (yet, I've no doubt it will meet the specs) but I find the DNR/NB are superb, helping me weed out signals my old Icom doesn't even know exist.
I'm really happy with it, I'm really unhappy with the small amount of time I get to play with it.
Hi Clint. Yes, it does tune like that. What I am missing is a button that will send a cw carrier so it can be used to tune f.ex. an outboard P.A.
Great video thank you. To get a carrier tone I just just hit function then turn off the keyer.. Using the the key then sends a solid tone. Its not as simple as what you want but its easier then going into the menus.
A year in the FTDX10 is still competitive --just recently picked one up because its the only one that works due to the high QRN factor near where I live in addition to living near an FM Radio transmitter. TBH I would do anything to switch from the FTDX10 to the FTDX5000 - because of supply shortages many times these days newer produces are worse then their older counterparts... I feel, personally.... I wish my 705 could handle the noise but it can't!! Yeasu filtering and Digital Noise Reduction is simply - best in class. So yeah - its a great radio, it is crammed with buttons.
I'd love to have a FT-5000, but I don't even know how to use all the features on my FT-2000 yet. I'm trying to decide between the FTdx-3000 and the FTdx-10 as my next addition. I'd like something with shortwave capability, but think I'd be better to get a Tecsun or Eton for that purpose due to portability (throwing in the go bag or back seat).
I'm 6'2 220#, pretty much an average guy. No issues whatsoever with the buttons. Just get used to hitting the Lock button once you're dialed in.
Perhaps installing a smaller diameter function knob, along with gluing an extension to the band button such that it extends
out past the outer ring would help those with big fingers. It's too bad that the rig needs this kind of mod in the first place.
I'm a "function-before-form" type of guy, and hardly anything suits me that can't be improved with some modification.
MY old FT-902DM has a good APF that works wonders with a weak signal.
you cannot compare a radio for expeditions or portable operation with such a monster and a piece of furniture as the 5000, and you also need to remember the price of both devices, when even today the 5000 is sold for the price of two FTDX. Unfortunately, it is true that the ergonomics of the FTDX are tragic, but the receiver is TOP :) It's as if they've forgotten that there are also nations that don't have little fingers, but this has been repeated for the umpteenth time and I doubt that it will ever change with Yaesu, the solution is to control TCVR via mouse on external monitor.
The same feelings as you, but I choose to keep it by my side. I also have the FTDX-5000MP as you mentioned FTDX-10 performance is quite similar to FTDX-5000MP, YES, it is one of two reasons why I keep it and the rest reason is I can find other brands of radio who can compete. I did plan Kenwood TS-590SG or TS-890, but they are too expensive for collection( yes, just for collection only). Yaesu really did a mistake with the placement of the button, anyway I forgive them already and I plan DIY a smaller "F" button for my bigger/fatty finger.
I would like to see an update of the 991A. I like the added 2/440 coverage but the radio is probably a generation behind the FTDX10 in performance and features.
Why would you need to mix vhf with HF radio! You’d better get your self a separate DMR radio instead
@@Mark300winsimple, because I would buy it. But it has to have DMR and the rest of the digital modes 😂
@@n1kkri 😂 i hear you, we always need that one more feature
I use the contour feature with it adjusted for gain rather than null. It works so well to pull audio from the noise!
I know. It's fabulous.
Where are you in Norge? Eg kan snakke en litt Norsk. Tusen takk
I believe you can send a continuous carrier for tuning by holding down the tune button.
When I do that, it activates the built in tuner, and tunes - which it is supposed to do. I want to send a continuous carrier without tuning the radio.
@@techstuffandmore CW mode, break-in on, internal keyer off and close the key or paddle should do it (?)
@@jonknodel5640 Yes, it does. As mentioned in the video, I can do it by going into the menus and turn off the internal keyer.
I have this radio also. Thank you for your video.
As soon as I saw the front panel I knew where the issue was likely to be! My absolute pet hate is a cluster of buttons around a vfo knob. Apart from bumping the vfo during operation, I can see that issue being irritating. PLUS being right handed the band button is on the wrong side. I can understand why they're unpopular. I wonder, Are there programmable function buttons on the mic that can serve as the function button? I built a mic for my Kenwoods that has 6 programmable buttons. VERY useful. 73 de GØUSL
I bought the DX-10 because its a hybrid and and has the same processor as the 101 series.
On the fence weither to buy the FTdx10 or go back to the 710 which I tried out for a month. I liked the 710 but I know the filters are much better on the 10 along with easier to access-friendlier functions. I also learned that using a HDMI converter for DVI for external causes a fuse/circuit to blow requiring service to the unit to have it repaired... the 710 has a self resetting one. One of my biggest dislikes on the 710 was having to go into the menu to change contour, notch etc.. and have just a couple seconds before it kicked you back out only having to start over again. Adjusting the DNR ..same issue. I really want to like the 991A, but everyone has told me that it just can't stand up against the 10. I do like how the 991 is layed out. I have also been told that the 10 is to big to use portable.. but a couple inches and 3 pounds difference, is that really a big deal?
+ Battery weight. RX current draw is 2.3A on the dx10, 1.2A on the 710, and 0.9A on the 7300.
I never touch the screen so I use a stylus or a mouse. If I click buttons I usually use the back end of the stylus. My complain it that we can use a mouse but there is no way to open the band select or the menu using a mouse. It would be easy for them to update firmware to give you a menu with a right click with a mouse for band and menu. Or even a touch icon to click on screen.
Great insight. From purely a function/menu/display perspective do you have experience with the IC-7300 to compare the FT-DX10 to? I have a FT-818ND for manpack/POTA/SOTA style but im now shopping for a shack rig that could double duty in car-based/front range style POTA/mobile. Thank you in advance.
It does seem like a major design flaw if you ask me. The Yaesu radios also seem to be very heavy compared to the equivalent Icom. If they could redesign the front panel for any future product that replaces this they will be onto a winner.
Hardly major as it doesn't affect the functionality, it simply presents some users with a sub-optimal UX, but I agree it would be good for it to be addresses.
I tap the touchscreen to switch band and mode, it is much easier than using the buttons.
Does the band menu only stay open 5 seconds or can you have it stay open longer
I have found that using a #2 pencil eraser to push the function buttons around the dial makes it a lot easer to keep my fat fingers from moving the dial.
Great rig but I sold mine because of the ergonomics. I think I had for 2 years, but too many problems. The love never started from day 1. I returned back to my old rig I had for 30 yrs.
A year later here. My DX10 remains working like new in spite of being bounced around in the RV for 15,000 miles over the past 3 years.
I do agree that the Band button should have been reversed with the CS button as the Band is used constantly and the CS not so much.
It may be that a firmware upgrade could do that.
I use the DX101MP at times and I never find it to be better than the DX10. The 101 menu system is not logical. The 10 is simple and logical.
it is a pity they didn‘t put band and mode one level up to where qmb and split(i guess?) is.
for tuning: i set CS to power, so i now can press cs and use the outer dial to set power quickly to 12-15watts and then I just whistle into the mic so i don‘t need to change mode from ssb away.
I’ve ran mine for a year now. Mainly all Cw. One of the best Cw rigs available for certain. One of the biggest draw backs of the dx10 is the scope averaging. It has a fiddly scope. You really have to play with the levels to find out how it works. I use 2d fall. Hated the 3D. No tune button sadly. I wish they would’ve put this radio inside of the 3000 so we’d have more finger room. For the money at the time it’s the best Cw rig I could find. What amp do you run with your 10? I’ve been using the als600 but looking for a bigger amp.
Hi Jay - I'm not running an amp with mine. Just running barefoot.
Yes perhaps Yaesu might in their next FW update create a link to the band screen by touching the frequency on the display just like an ic7300. It can be done because they already have it activated for the mode button on the ftdx10. Yaesu....I hope you are listening please..
Appreciate this review. I had noticed that some were being returned. I figured it was because of the buttons being too close to the tuning knob. Pretty silly when you can just lock it in place. Its an incredible radio. That receiver is out of this world. Hopefully this is a radio that is well made and will last for a number of years. You did a very nice job with this review. 73. Joe
It's all about fit. There are a lot of great radios out there and people listen to other people's sales pitch and then find out the radio doesn't fit them. Dockers is a great brand of pants but if you don't get the right size they are useless. Fit is one of the most important features in a radio that is never talked about. Go to a brick and mortar or a hamfest and spin the dial on several models and see what fits your needs.
The other reason people have been returning them is they are plugging in the wrong monitor for seeing a larger display and burning out a board in the radio.
Another way to tune is simply push the function button and turn the keyer off. Then your straight key or paddle will simply work like a normal straight key. I generally either do that or throw the rig into am and key up.
Sold my 7610 and replaced it with the ftdx 10. Much better rig
Do you use that Garmin GPS for APRS somehow?
I’ve had mine for about a week. I love the radio and people returning it because their fingers are too fat, That’s like super petty. I love the radio I see you compared it to a 5000 which is pretty close I compared to one 101 just a mini or version but I love the radio and if people return it because their fingers are too fat that’s nuts to each his own 😂
Hehe - you're right :)
How good Tuner is in Ftdx10?
😅I am disapointd with the the internal ATU TUNING RANGE AND IT TAKES TO LONG TO TUNE
Q: could this radio be set up with
1.830cw in memory ch1
1.920ssb in memory ch2
1.960 rtty in memory ch3 (for your tune )
3.560 cw in memory ch 4 .....a
...
28.060cw .......... ch 30
28.500 usb .......ch 31
And so on and so on then just tune from the desired memory ch just like a band stack rather than vfo a/b
This is how I use my icom ic 7300 it is much better for easy of use ?
So I am always on memory mode and just turn the multi wheel as a band/ mode running up and down to desired band and mode ,then adjust the vfo to desired frequency. I find this works great . Would this work on the ftdx10 ? I know it did not work very well on my ftdx 3000 which was very frustrating. Any thoughts /advice. Thanks MM0UDI.
What does the button with TUNE on it do?
Running resonant antennas myself, I have no idea about that button. I’ve heard it’s a good button though.
Thanks for the video.
VERY INFORMATIVE !!
They are good on 11 meters as well as 160 meters.
I got the DX10 after a few hrs of using I just found too meny flaws .
I dont have a big hands but every time i need to used a fuction on those more than 10 buttons located around vfo I end up in a diferent frecuency .
That is bad enought not to buy the DX10 but you will find other serious issues some of them shared by the of latest Dx line including the Dx 101 .
pan adpater osciloscope are a joke useless . There not used and you have to ajuste it level etc.Gosh it is a waste.
Selecting a mode is a race to be the screen timer but if you are asking for a function located on the right side of VFO you are going to get frustated trying to beat the short 3 seconds to change or selet a mode . Now when come to weak signal DNR on NB you are not going to like any of the 3 audio situations to adjust a fuction the race is on .
The DNR just dont work right .
Here is what you are going t o face
1" gloglo"audio you will have hard time to understand even under 5 level of DNR
2 -noise vs oudio , if you have a decent signal but noise is high using the DNR Leadsl to a robotic audio or not using the DNR and deal with the white noise.
3 - on weak signal the dame DNR induce a vitual QSB defeting the whole purpose to use The DNR .you are in not win situation.
CW is not bad because you handking a single tone.
I RETURES THE POS dx10 for something better like 7610 .
I Rest my case I DONT ane a raduo full of menu to operate ans it have to come with pencil to operate . You waste more time dealing with menu after menu and flaws than enjoying a QSO
Olny the 101 is nice and simple to operate , osciloscope are a joke also.
Thank you...excellent!
set CS button to CW and it sends 10w carrier
A friend locally was on the verge of sending his back the very first day he had it due to the excessively fast BAND menu, I did the firmware update for him which helped. He has lent me the radio for a few months to try, unlike him I am happy to use CAT control a lot. It is a great performing radio, but I am not yet used to the ergonomics. It has made me want an FTDX101 however! Update: Despite some issues I did subsequently buy an FTDX101MP, most of the time I navigate the menus with a USB mouse.
tap Band and then Func to navigate the band stack.
Not working for me. Did you have to turn that option on?
@@techstuffandmore just a firmware upgrade I think.
The form factor is why I sold it. Too small for my hands and too little gain over my ICOM9100. The radio I would be all over is a IC7310 with display output. Are you listening ICOM???
Its a nice dream but I don't see that in Icom land for sometime. I would love it too though.
New Subscriber! Great Information thank you!
Use a stylus or the rear of a pen to push the small buttons.
I think you will be in the minority with your personal comment, but if that is your personal view so be it. The rest if the HAM world think this is an excellent radio. Agreed there are some items that could have been better executed in the design. But on balance it’s a real upgrade from those radios of 20 years ago. Enjoy your radio which ever rig and mode of operation. Best regards Steve
Thanks for sharing your experiences. I just ordered one today.
..so, check what exactly?
People with big hands/thick fingers, have returned theirs. This doesn't mean that all people with big hands doesn't want to use this radio, but it might be worth while checking before you buy.
I connected mine to flrig and control everything with a mouse.
Hei, jeg er fornøyd med dx10. Men, hehe, greien er jo det at jeg ikke har hatt transiverere før til å sammenligne. Fikk lisensen for nøyaktig 1 og et halt år siden. Det er en flott radio. LB8DJ
😂😂😂exactly for this Reason i bought the FTDX101. I have fat Fingers...
But I´m sure the FTDX10 is a exellent Radio.
How to Tune you can try this, Go to CW Mode, turn "BK in " on and then push the Mox Button.
At the 101 it works, so i think it would work with the 10 too, because the Radions are very similar. in the Software.
73´s DB4WD
Guido
I tried that, but doesn't work. I do know it works on 101 though. Hoping they'll fix it with firmware.
Or y'could just press and hold the tune button for a second
The next batch of DX 10 will come wirh a 10c pencil to operate .
TUNE,CW MODE,,,,PTT BUTTON ON THE MIC WILL KEY IT..