It is yeah. But I really like it. Sometimes if there is a small dip in the power the power supply has enough power stored to keep my system running without restarting. The cables are very rigid.
This is kind of😝 a wasteful use of time. The result of this man's efforts is realized during the last minute. The rest of the video is about the install of screws and attachments.
Ek sal voorstel as jy die fan op die CPU cooler daisy chain met die ander fans maak net seker jy plug dit in by die CPU fan se pins op die motherboard. Dan sal almal vinniger gaan soos jou cpu warm word. Ek het al gehoor mense doen dit opsetlik so dat daar meer airflow is saam met die cpu cooler se fan.
There are 3 plugs, 1x 4pin for the power/fan control. Then there is the male and female plugs for the RGB which you can use to connect multiple fans RGB. The small cover looking things are clipped over the RGB connectors to keep them from disconnecting.
Hallo Andre. Ja, die fans se RGB kan jy daisy chain. Dit het male en female plugs. Jy kan hulle by die 3 pin RGB in plug. Ek het self myne op die CPU cooler en bo kant van my kas. Ek weet nie of dit is waar ek bly nie of die fans se design is nie, maar hulle word nogal vinnig vuil. Ek probeer hulle tenminste een keer per maand skoon te maak. Hulle kan nogal geraas maak op 100% fan speed. Ook my kas staan minder as 'n meter van my ore af.
@@rewovetech ook ok dankie vir die informasie. ek het gekyk na die of die deepcool FC120 RGB PWM 3-in-1 Pack LED Fan. Ek soek mainly fans wat mooi sal pas met die GALAX GeForce RTX™ 3060 Ti EX . so sukke fans. van daai galax gpu. want ek dink om die gpu te vertical mount.
The connector item D. The one end plugs into the RGB controller, the other end goes to power supply SATA cable and the last end goes directly to the fan's RGB plug.
Hey man. I connected these fans like you showed in the video and I powered my computer on and there are no lights? Do I have to install the software first?
When I connected it to the controller I powered up when I pushed the button on the controller. Connected to my ASUS TUF GAMING X570-PLUS board it was turned on by default and I had to load the software to turn them on or off.
@@romanyoutubegaming All the cables are part of the kit. This link is for the controller that came with the kit. amzn.to/3kw0ZsJ From what I read this one can be connected to the motherboard header amzn.to/3zkiMHD
hey man, i just got these fans and i connected 3 of them to each other (daisy chain) and the last fan's argb female pin i connected to motherboard so that i thought i can use asrock software but end up the light is not working. unless if i connect to the controller and controller connect with the sata cable, it works perfectly just it is very limited to adjust the colour. Fans spinning as usual. just the led. motherboard i use b450 steel legend
@@hugge9798 yes bro i did. i bought one more single argb sickleflow. connect 4 of them daisy chain. and last fan's female argb pin connect to the motherboard. i can only use motherboard software. not the cooler master. im not sure why.
WOW these look amazing i think i'm gonna buy these for my next build for sure!!!
They are quite nice. Can be a bit loud at 100% but moves air very good through my case. Also try to make it a habit of cleaning them regularly.
Your PSU is very overkill 😍
It is yeah. But I really like it. Sometimes if there is a small dip in the power the power supply has enough power stored to keep my system running without restarting. The cables are very rigid.
Are you also using Haf 932 like me ? :D
Yes I do! I really like this case. I have been using it for about 13 years now! this case has seen some build and some weird DIY things. hahaha
This is kind of😝 a wasteful use of time. The result of this man's efforts is realized during the last minute. The rest of the video is about the install of screws and attachments.
ek sien van daisy chain. ek wonder net of dit sal ok wees vir cpu cooler?
Ek sal voorstel as jy die fan op die CPU cooler daisy chain met die ander fans maak net seker jy plug dit in by die CPU fan se pins op die motherboard. Dan sal almal vinniger gaan soos jou cpu warm word. Ek het al gehoor mense doen dit opsetlik so dat daar meer airflow is saam met die cpu cooler se fan.
are all of the drive bays full? if not taking them out would increase airflow significantly
My board only have 4pin argb header. How do i sync this to my asus aura tuf b450 tug gaming pro-ii mobo??
You cannot. I'm in the same boat.
Unless, anyway, you get the small controller instead of the mini. It's 25 USD
So does each individual fan plug into the motherboard because my mobo only has 2 rgb headers.
Hallo Thomas. In the box is a splitter cable. So one side plugs into the motherboard and the other 3 plugs goes to the fans.
For the RGB part they all connect to each other and then into the motherboard with one plug.
im confused at the part where’s you start assembling them what are the little plug things
There are 3 plugs, 1x 4pin for the power/fan control. Then there is the male and female plugs for the RGB which you can use to connect multiple fans RGB. The small cover looking things are clipped over the RGB connectors to keep them from disconnecting.
kan jy dit dasy chain en kan jy dit aan 3 pin rgb inplug? Ek dink om n paar te kry vir case en cpu heatsink.
Hallo Andre. Ja, die fans se RGB kan jy daisy chain. Dit het male en female plugs. Jy kan hulle by die 3 pin RGB in plug. Ek het self myne op die CPU cooler en bo kant van my kas. Ek weet nie of dit is waar ek bly nie of die fans se design is nie, maar hulle word nogal vinnig vuil. Ek probeer hulle tenminste een keer per maand skoon te maak. Hulle kan nogal geraas maak op 100% fan speed. Ook my kas staan minder as 'n meter van my ore af.
@@rewovetech ook ok dankie vir die informasie. ek het gekyk na die of die deepcool FC120 RGB PWM 3-in-1 Pack LED Fan. Ek soek mainly fans wat mooi sal pas met die GALAX GeForce RTX™ 3060 Ti EX . so sukke fans. van daai galax gpu. want ek dink om die gpu te vertical mount.
At 6:26 you say the connector from the controller plugs into something? What does that connector plug into?
The connector item D. The one end plugs into the RGB controller, the other end goes to power supply SATA cable and the last end goes directly to the fan's RGB plug.
Hello can i insert all pwm cables fans in to One pwm slot of motherboard? There are any cable to make It in the package?
Hallo. Yes there is a 3 to 1 adapter cable in the box that you can plug all three fans in and then plug it into the PWM connector on your motherboard.
@@rewovetech hello but One of the cable adaptor Is pwm other are 3 PIN cable
Hey man. I connected these fans like you showed in the video and I powered my computer on and there are no lights? Do I have to install the software first?
When I connected it to the controller I powered up when I pushed the button on the controller. Connected to my ASUS TUF GAMING X570-PLUS board it was turned on by default and I had to load the software to turn them on or off.
if i get this kit and connect th 3 fan in cable 3 in 1
then i connect to argb header can i control the lights of fans from board b 450 aours elite ?
Sorry for the late reply. As far as I know you can do it like that.
DID IT WORK BRO? WHICH CABLE DID YOU BUY?CAN YOU SEND THE LINK?
@@romanyoutubegaming Which cable are you talking about?
@@rewovetech The Cable That Connects To ARGB Header In MOBO
@@romanyoutubegaming All the cables are part of the kit. This link is for the controller that came with the kit. amzn.to/3kw0ZsJ
From what I read this one can be connected to the motherboard header amzn.to/3zkiMHD
Can u static purple color with mini controler cooler master sir?
yes but you might need to download the software if it is supported
hey man, i just got these fans and i connected 3 of them to each other (daisy chain) and the last fan's argb female pin i connected to motherboard so that i thought i can use asrock software but end up the light is not working. unless if i connect to the controller and controller connect with the sata cable, it works perfectly just it is very limited to adjust the colour. Fans spinning as usual. just the led. motherboard i use b450 steel legend
Did you fix it? I think I am having the same problem. I can't change color on the PC in the software.
@@hugge9798 yes bro i did. i bought one more single argb sickleflow. connect 4 of them daisy chain. and last fan's female argb pin connect to the motherboard. i can only use motherboard software. not the cooler master. im not sure why.
Awesome Thank you!
nee ek lieg hehe
Rubbish