Full Sawmill Shelter Build in 10 minutes
HTML-код
- Опубликовано: 16 мар 2021
- Today I"ll show you my full sawmill shelter build in 10 minutes from start to finish as I take you back in time from when the old hillbilly hideout sawmill shelter was still standing and this new sawmill shelter was nothing but a dream. With some planning and the help form my tractor, watch as I get the base all set for a floating beam foundation to which I place 2x6 floor joists at 16 inches on centre. As you'll see here today, the work was long and tedious at times but with no electricity way out here in the woods, I'm fastening all the wood with nothing more than a hammer and some nails. One of the reasons I left the old sawmill shed in place while I built this new shed was so that I could make lumber from surrounding trees as I needed it. All the lumber you're seeing in this video has been freshly cut from trees and makes the wood still full of moisture. Despite using this "green" lumber for building, you'll see how it can be done effectively and safely taking into account future shrinkage of the wood. In this video you'll also see some materials that I think are relatively cheap and a good choice for such a build as this. Metal roofing allows for heavy snow loads to easily slide off the roof and makes for a maintenance free covering. The tarp curtains surrounding 3 sides of the building is also a good low-cost option that I can raise and lower to keep the weather out of my sawmill shed. Also check out the lighting system I have in place that runs off of a 12v battery and keeps me sawing well in to the night. Finally, the overall design I chose in which I use a raised deck to place my sawmill keeps my feet from getting down in the mud when spring rolls around and helps to ensure that the saw deck is always flat and clean. Just a few things to watch for in today's video. Glad you're all here and happy sawing!
Portable Sawmill seen in this video: 2017 Woodland Mills HM130
Tractor seen in this video: 2012 Kioti DK40se HST cab - Хобби
I love how you make your hammer dance to a fast tune! Great video.
Thanks for the video!!!
It's like a woodpecker meets an angry bee meets a busy beaver. Amazing what one person can do. Great job Sandy!
Thanks Jill
I’m exhausted watching this. I watched the every episode. I forgot how much work it was. Strong work Sandy. I’d be proud of that structure too!
Thanks Tom appreciate that. Hope all is well.
Saving for a mill, to build an addition on my house. This beautiful sawmill building is my immediate project once I get the addition lumber sawed and drying. Thank you for sharing!
Freaking awesome
Dam your fast your hired 😄 nice job
Hahah if only I could work this fast in real life
You have been an inspiration for me and watching your videos got me into sawing myself and rebuilding another woodworking shop once again but this time it’s only a hobby of mine;) thanks Sandy for all the great videos
That’s great to hear Louis! Glad you’re liking sawing as much as I do
I love your rapid nail gun.... Very nice. Have a great day up there.
It sure is quick haha
Videos like this are a great treat! Thanks for throwing this quick run through together! Really enjoy each an every vid I watch Sandy! 😊. Take care! Andrew from NB :)
I have watched quit a few of your videos, all are great, thank you for taking the time and Great job on the shed!
Glad you tuned in Rick. Thanks for the feedback!
Verry cool
Merci
Thanks for coming along for the video M Lafond!
Great job, well done
Good for you, great achievement.
Man, really makes me hope I can get better and get back outside doing fun stuff like BUILDING things. Nice work man.
Thanks! Hope you can get out there as well
you did a really nice job building then and those things that I noticed you built it to last many lifetimes with just a little simple care that'll last many generations you did a great job
Glad you tuned on Edward!
Great video
That’s killer Sandy! Man you work fast lol!
It’s the sludge!
Well done Sandy, well done.
Thanks Kent
That was fun!
Great summary Sandy
Thanks Doug
Calling it now with 1,200 views. This will be your most watched video by the end of the year.
Glad you liked the video and who knows what can happen
Well done I am proud of you ! Man you work hard and fast , but with good skill...
Thanks James appreciate that
I like the way you do things. Good job!
Thanks appreciate that
Nicely done.
Thanks Patrick!
Mighty Fine work. I had never seen your previous shed, maybe some more time travel is in order.
"As Jackie said" How sweet it is! I can watch repeats as I didn't miss any but some I did watch over/LOL. I myself would of liked to do this and that's no joke. I mean its not summer appreciation day for a nudist but snow and winter months give a person to reflect and enjoy the life of a logger. I enjoyed all the seasons as a kid but snow has been not really that bad for the comparison. One year we had started getting snow on the last week of june so on the forth day of july I looked out and saw nothing but snow and put on the snow shoes and then made my way to one of the sheds and never even noticed that I had walked level across a truck bed. Now thats deep and just close to insane winters history. I just love the green grass in the summers and have a great story for you as a kid with horses that would tell you I have seen some snow. It is just that I am seventy three now and it lost its wild appeal
Glad you tuned in Morgan. Thanks for watching.
Nice work. Looking forward to staring outside in Northern Lower-Michigan!
Thanks Jeff
Crushed building that hideout buddy.
Thanks Scott!
Hi! I have been watching your videos with great interest, as I will be a newbie sawyer soon, when my mill arrives in a couple weeks.
And I will be cribbing a lot of this build for my shed. I guess I should start felling trees real soon. . .
THANK YOU FOR ALL YOUR INFORMATION!
Glad to have ya on the channel.
Great idea !!! Thanks. Craig. Pa .
Thanks again for tuning Craig
inspiring
ce que tu fais est formidable. bravo c'est très bien
Merci pour ça. Je suis heureux de t'avoir ici sur la chaîne.
Nice video Sandy ! Now filling new drying shed with lumber I bet.
And getting logs to the mill .
Thanks Dan. Certainly gearing up for some sawing real soon
Nice recap of the build. Don't think I missed any.
Thanks Eric!
MAN!! You have GOT to give us your recipe for that ole Sludge Coffee!! Why, just LOOK at how fast it gets ya goin'!!! HAHA!!
It’s like a turbocharger!
Sandy's Sludge tm
TOP!!!
5:04 - Wow, got all the tools, left and right handed hammers
Haha
I know you covered the building size somewhere but I was hoping for a quick recap on dimensions. Looking at a build for mine as it has taken over my Tractor shed and my TYM 654 sits out in the cold.
Awesome sawmill, I am just setting my mill up to cut the wood to build mine next year and have 2 questions...first, what was the coating you put on the lumber that touched the cinder blocks, and second, did you make a lumber list for building it!!!
Many thanks for your efforts and videos!
If we only could work that fast
I’d get way too much done haha
You did a fine job. That shed should serve to protect you and your band mill for many years. The only question I have is why not use some metal hangers for all those floor and roof joints rather than toe nailing. Seems like it would provide a more solid way of making the floor and ceiling more securely locked down.
Thanks for tuning in Dennis. I normally would only use joist hangers when the floor joists weight is hanging off of a beam but in my case the joists were sitting on top of a beam with rim boards nailed in to keep the floor joists vertical. Hurricane clips could be a good idea here though for the rafters though like you said to prevent up lift. Hope all is well with you. Happy sawing!
Great Video!
Did you use pine?
I ask because I have several stands of Virginia Pine on my property and have thought about milling them and using them for a shed just like this. Once again great job!
This is all red pine that I built with. Thanks for checking out my build. Hope yours goes well
Hello Sandy, have you ever considered building a peak on the roof in line with your walkway so that when the snow slides come off it won’t damage the walkway? Just some food for thought. Then it would eliminate the need to remove your walkway in the winter.
That’s a good idea Mark. Main reason I have to remove the walkway is to clear the snow and sawdust from the other side of the boardwalk with my tractor unfortunately
I’m ordering me a Woodland mills this Morning, What do you use as a sealer on your back wood , I’ve watched numerous videos but haven’t seen you mention anything..
Sandy, what is the green sealant that you use to treat the exposed parts?
Nice work. Any advice using green wood right off the mill?
I tend only to fasten down green siding and decking with one fastener so that the wood doesn't shrink and crank if I were to put two fasteners
Hi Sandy. Big fan in Alaska. I have an HM126 with one extension on the way. Will need to put together a platform and shed roof as soon as the snow melts this spring. Do you have the basic dimensions for yours somewhere? Or did you use a drawn up plan?
Hi Stede! Thanks for tuning into the channel. Basic dimensions are 10' x 20' with the opening leading into the sawmill being 14'. Hope that helps. Thanks again for watching.
What are the dimensions of the floor?
What camera and/or camcorder do you use for your videos?
What is under the concrete blocks to keep them from sinking? Or should they all settle the same?
The concrete blocks are just sitting on compacted sandy soil and so I don't imagine they will sink into the soil but they likely will move just a little bit with frost but in that case I'll just re-level the floor with some shims.
Hey Sandy, have you had much issue with condensation under the tin roofing in the cool months? I see that on some of my structure and wonder if a moisture barrier should be used. Since there is no moisture barrier between the tin and wood what long term effect might there be with moisture on the strapping? Life expectancy of the roof built like that?
I get a little condensation but it evaporates pretty quickly since everything is open
Typically since it’s not heated space there’s no cold and warm air contact so not much condensation
that's about $4K in lumber today!lol
Hey sandy I was wandering on your 6x6 posts going up would it have been stronger to put them in the ground then put a band around them then set the floor joists? Just wandering
Awesome build... can’t wait to see what you have next. I hope to get my woodland mills this summer
Hi John, thanks for watching. I think it would have been stronger to put the posts in the ground for sure. Reason I didn't is because I don't have treated lumber and was concerned about the pine posts rotting quite quickly when in contact with the ground. Pressure treated posts in the ground would be my second choice with concrete piers and posts attached to them above the gorund being my first choice.
I was beginning to think nobody knew how to operate one of those old fashioned nail whacker thingies. Everyone seems to want to use screws.
I love to take out frustration on some spikes from time to time. Thanks for watching Clifton
Ringshank galvies too. Mucho respect. Not a one lick green 16 by any means. I'm gonna remember that tree saw the nest time im cutting rafter tails
I loved version 1.0, but it doesn't have a thing on 2.0
Thanks Neal! I'm really happy with 2.0, although my mind starts wondering often and things towards 3.0 haha
I'm pretty stoked. I've been looking at mills and watching videos for years. This year, I finally bought an hm122. I've had it for 3 months and just got the time to out it together. I started milling today and I am not disappointed!!
@@sawingwithsandy .