HOW TO REMOVE YOUR SIDE PANELS ON THE RIKA AUSTROFLAMM PELLET STOVE

We show how to remove the Side Panels on the Rika and Austroflamm pellet stoves.
RIKA 2006 AND NEWER FREESTANDING MODELS - PLEASE READ BELOW ...
Since the video is only showing the Austroflamm Integra I stove, you may be a little confused trying to remove the panels on the RIKA II 2006+ freestanding model, so here is how you will take off the panels ...
As shown in the video, we show the RIKA front Colored side panel showing the mounting bracket on the back side of the panel. The screws are inside the hopper to remove. You will have to lift up on the panel to remove off of the base after removing the inside screws. If the panel is too tight and won't move, you will have to loosen up the hex bolts on the top of the stove under the colored decorative top and lift up the cast top portion of the stove enough to slide the colored side panel up to be removed off of the tabs on the base.
Be sure to ALWAYS UNPLUG YOUR STOVE before working on it in anyway TO AVOID POSSIBLE SHOCK OR GROUNDING OF WIRING.
This is the first of our New " HOW TO " Short videos that is quick and right to the point for the location and removal of a part on the Austroflamm and Rika pellet stove. These shorts will not be as long as our " TROUBLESHOOTING " videos which requires more time and information for explanations.
Please Subscribe to our channel for our all new 'SHORT" Videos to be alerted when new videos are uploaded.
A Huge shoutout to all the military keeping our country safe. Thank you for your sacrifice.
PEACE