Programming Zello on Inrico T199
HTML-код
- Опубликовано: 10 сен 2024
- Read more about this radio: network-radios....
Total Control Software: www.sigma-rt.co...
Change Inrico T199 APN Settings: network-radios....
Programming the T192: network-radios....
Where can I get flash firmware update for T199 ? Mine will nor respond after connected to pc doing a memory test
There’s so much you can do with these radios now I am so glad that Zello is expanding to be able to work with these types of network radios I can’t wait to see what’s coming from them next in regards to these. I was just reading on Zello website and they also mentioned you can do the same with the Talkpod N50, could you possibly do a video on the N58 installing Zello?
Thanks
Hello. I have T199, with Inrico ptt installed. I need to install Zello. I have two problems.
a) I cannot uninstall/ Logout from Inrico PTT
b) I cannot install latest version of Zello (can install/ login older version)
Please assist.
same problem
I have an LS-D828 mobile that has an old Android version, that doesn't have the play store. Will TC allow me to update to the latest Android version?
Hi. Is there a way to map the ‘channel’ selector to functions in Zello? Or how can you change contacts/channels without a PC?
With button mapper you can program the channel selector to perform some actions but I did not try that yet.
Duarte Braga button mapper does not recognize the channel selector.
go to rename channel in zello and add ch nr (01,02,03 etc)in front of the channel name then your channel dial will function for zello
@@thebikeguy-t7k ...Then, go to "status" in the settings menu and change it to "solo" and leave it there. Otherwise, you will hear all channels at once.
hi can you recommend a site doing a repair for these devices T199 and T526 thank you in advance
Would like to speak with you on setting up. Thank you
CAN YOU PROGRAM ECHOLINK ON THE T199
Hello - considering buying a T199 - just one more question - If I do a complete 'cold boot', ie from flat battary and then charge, can I make it unlock my SIM card automatically? Or do I have to reconnect to Total Control each time I have been without power?
73 de SM0JWX/Rikard
(Have two Talkpods working fine, considering adding a T199 just for one channel)
the sim card must be PIN unlocked otherwise you need to use Total Control each time
@@DuarteBraga OK; many thanks for info!
73
Now I finally got around to buying a T199. Works just fine! A very nice little radio to put in the hands of the wife... No touch screen to mess thing up with! Perfect!
Your video was extremy helpful - my only problem was getting th zello.apk fil to the radio, until I figured out it was just a drag-and-drop affair! Sometimes you feel to old... :-)
can the police scanner apps be run through this radio, how would you go about changing from agency to agency without seeing it on a screen?
I plan to attempt the same thing. The monitoring apps that use broadcastify system use a lot of data as they stream continuously, not just when receiving a signal. I'll try to remember to come back and let you know how it worked out.
Informative video. If you wish to bring it back to its original Inrico ptt system, do you just uninstall zello via totalcontrol app?
Really cool, Durate! Thanks for sharing this to us, we have an amazing non-screen radio that works with Zello too, do you mind if we share some more information with each other?
Hi, I wonder if anybody has managed to find a way to programming the channel selector at all?.. Thanks
support.zello.com/hc/en-us/articles/360009735831
Mapping Zello Channels And Contacts To The Inrico Channel Knob
The Inrico T199 radio includes a knob that allows you to switch through channels. To map Zello channels to channel numbers on the T199, do the following from the Zello app:
Open the "Channels" screen and then click on the channel that you want to map. The talk screen for this channel will display.
From the talk screen, click on the arrow down icon, then select "Rename channel".
Change the channel name to include a two-digit numerical prefix matching the number of the channel on the knob. For example, if you have a channel named "CB Friends" and you want to map it to position #13 of the knob, rename it to "13 CB Friends". For channels with numbers under 10 use a leading zero (i.e. "01", "02" etc). You can map up to 16 channels and contacts combined.
Exit the channel talk screen and then rotate the knob to test your changes. When the channel is selected, its name will be announced using text-to-speech. The channels are switched in their numerical order. For example if you have channels 01, 07 and 13 assigned, rotating the knob will make channels switch in the following order: 01 -> 07 -> 13 -> 01 -> 07, etc.
Repeat steps 1-4 for all of the channels and contacts that you need to map. However, for contacts, instead of selecting "Channels" in step 1, you would open the "Contacts" screen and then select and rename the contacts you want to map. Be careful to use unique prefixes for different channels and contacts.
Please note that when using ZelloWork channel and usernames, the display names are controlled centrally in the ZelloWork web management console. To ensure the correct order of channels and contacts, make sure to rename them appropriately with the management console.
how you hard reset. i cant acces over vyser i get fail to install the app
hey, any way to configure the secondary sidebuttons to someting useful? i mean change zello status and so on... looking for help here...
Phoenix1982PL Phoenix hello, I have a same problem here... so do you manage to configure it?
TRACKING
hi, nice video, i have the T199, i have total control on pc, but i don't see any playstore on the screen of T199. how can i fix this? thx greetz from Belgium
Hier het zelfde probleem
It is will dificult to use if we have many group that we have to choose using computer
Any idea how to work the PTT button with Zello & the T199 when the app is running in the background? its completely useless otherwise. Powering up the device the PTT button doesnt work as the android needs to be logged in and Zello app opened.
Tried button mapper and it didn't work.
Any other ideas?
I really really need to know how to make the PTT button of the T199 work with the app running on the background.
Southeast Monitoring have you figure the answer yet?
I'm kind of on the same situation...
Save the problem and just don't buy an screenless radio.
Zello was made to be used with touchscreen devices...
Just buy the T298 or another with screen and that will do.
I got the PTT working on T199. First thing to do is make your chosen channel "Default" within zello (Hold on the channel name and choose "make default"). This ensures that it PTT has a specific channel to transmit on when zello launches. Next, ensure preferences are set to launch zello on boot. Then use a third party app to make sure zello is in focus whenever standby mode is toggled. I used one called AutoExec1000.apk (google it) and put it on each of my T199s. For each option (boot, dock, insert headset etc), select Zello as the target app. I now have five T199s, all of which launch from scratch or from standby and work with PTT straight away.... Hope this info helps.
@DJ_Wollie The only three things I can think of (1) make sure you have made your desired channel on zello the "default" channel. Without this, the PTT won't work when the radio is launched as it has not been instructed which channel to transmit on. (2) make sure you have selected zello as the default app to run on launch in autoexec1000 app, as well as in zello options. When you set up the options in autoexec, there's a two-stage process to get it to work, firstly select zello as the chosen app, then as you go back the the previous screen, the app should be listed with a white circle next to it. if the centre of the circle is red, it's selected, otherwise you need to click on it to make it red. (3) By default the T199s have a screen lock on them, which you have to slide to unlock when connected in Total control. This prevents buttons from working, so you need to disable screen lock in androids settings. I now have six T199s and they all work flawlessly, though only on one channel. I don't have the equipment to make a video for this, but will try to at some stage in the future. Best of luck, please feed back if you get them working!
Can the talkpod N50 be programmed in the same way (Just to run Zello only), or does it need different software?
Alan Ross no. Talkpod only works with PTT4U
What kind of SIM card. Pre paid?
full detailed instructions to setup T199 channels etc available at. networkradios.weebly.com on the Inrico T199 page. - : basic setup 'from scratch'. Set up a Zello account specifically for the T199 . Log in on PC version of Zello, fill in Profile info & image, add channels, then logout on PC. - On the T199 via Total Control.. install Zello, login on T199 Zello, set status to SOLO... rename channels with number prefix and a space. EG: 01 first channel .. 02 second channel.. etc. : I also go to Contacts, and rename the ECHO contact as 16 Test, handy to check connection.. Goto Zello Settings - Options - Behaviour and make sure "start zello when device powers on" is selected. : You can now go through the zello settings and turn off/change send/receive images and set zello alerts etc as required.. then unplug USB and use channel selector.. : Note On power up It can take a minute for Zello to 'wake up' and be ready to use. - check with channel 16 (16 Test channel on my T199 setup) make a test call and check delay is short, If so then You are good to go :-)
Thank you so much for posting this comment! I just purchased two T-199s and I'm having a problem with button mapping / channel selector. You gave me exactly the information that I needed!
Thank you again!
Jeff - KE8GLK
@@jeffcarr6371 Glad the info helped You get Your T-199s setup. Still using my T-199s when out and about on my bikes in the hills. Just one wee tip for outdoor all-wether use.. I added a small rubber 'O' ring under the On-Off-Volume knob to keep water & dirt out of the small gap. They have been rained on, covered in mud and bounced across rough landscape many times over the past 2+ years of use. One was even dropped in a river, twice! and they are still working well.
The Total Control software would probably be handy for programming the TM-7 as well.....
TC on TM7, T199 and T320. works very well on all. makes it easy to use pocketTX-RX, webSDRs and most apps that use text lists..
@@hairypaulmm7wab195 Have you tried Total Control on the Inrico T529a?
Can I use it for Teamspeak 3 ?
Can i configure t198 same like t199?
Can u help me please send me a software to be use in my radio.and instructions on how to install and working with zello
This video covers exactly the information that you are seeking. Total Control can be downloaded online. The step-by-step process is well documented in this video.
not happy with this radio cant connect it to a pc, anyone able to help?
How can I switch channel on Zello? Mind to share?
Hello. Do all T199 roger beep is sound like that ? It is because in the different videos shows T199 roger beep was different. Your answer will help me a lot. Thank you
No, they program that sound, and I want to know how too! Because I love that tone!
I have changed my "roger beep" settings in the past, but I cannot remember if it was changed through the app on my device or if I had to do it on the computer / console online. Just a hunch, I believe it can be changed on the user end.
there is a description of how to use custom tones on zello on the Misc page at the networkradios.gq site. scroll down to the section headed 'Custom alert tones for Zello' there are a few sets of alert tones available for download if You do not want to make Your own.
@@hairypaulmm7wab195 Thank you, Hairy. I like the short squelch sounds.
Hi, first off I would like to say amazing I was wondering for a long time if something like that was possible.. A question about the Total Control software, Is it free? And after you downloaded do you need to have internet connection to use it and make changes on the radio?
Thanks
You don't need internet to make changes. But you need internet on the radio, for the obvious reasons.
Of course, I was referring to the software for the Windows computer after you download it you don't need an internet connection to continue using it correct? As for the radio in a standard data plan will do correct? Thanks
Yes, that is correct! You don't need internet to run the software.
Where can I find the PC software for download
tc.sigma-rt.com/
YOU CAN HELP ME TO CONFIGURE THE T-192, I HAVE PROBLEMS WITH THE FILE PCSettingsEN.exe, I MISS AN ERROR WITH THE FOLLOWING MESSAGE ENCOUNTED AN IMPROPER ARGUMENT
Read this article: network-radios.com/index.php/2018/08/09/zello-on-the-inrico-t192-screenless-radio/
Thanks for the link, but I still have the initial problem, I use windows 10 and I can not configure the APN yet, I would really appreciate it if you help me
hi i have to of this radios. and how i do a hard reset i dont whant to use the PTT default software i whant to use the zello. i whent to reset in the android and i get the app PTT and the default config in the old groups.
djmaxmv you need this: inrico.shop/product/inrico-t199-eu-unlocked-android-firmware-copy/
hi. thanks. i having problem whit one radio i cant get the total control connect. i send the command to install the apk and y get an error. is any form to hard reset the radio? tnx
can you connect this phone to a macbook?
hello how can i remove the inrico ptt apk from t199
ican fine the firlmware inrico t199 software
Like
Does it need a license to use this?
No
Is not run from Windows 8.1 (total software)
all so works on senhaix n60 but will display ALPS N60 but fine works on my older n60 as i busted the touch screen ..jeff m0prf..
ciao non risco ad entrare nella radio T199
NOT easy to program, sent mine back and got the 320!
this video has not been helpful as you have not shown how to set up the channel changer lol
Please refer to the comment / answer above.
Can you sending me software
www.sigma-rt.com/en/tc/
tc.sigma-rt.com/
Need a adb driver
So I have a Zello free and a Zello work, can I put zello work on ch1 and zello free on channel 2? Also my Inrico does not have Google Play, any way to get that on so I can do things like broadcastify?
Since Zello free and Zello Work require two different accounts, I would say you have to pick one or the other. Switching accounts requires connecting the radio to the computer and accessing it through Total Control. When you disconnect from the computer, you've disconnected from your control source and therefore you're unable to switch between the two accounts.