This is actually so cool, ive been saying for awhile now that someone needs to figure out a mechanical full auto engine and then what do i find! so cool, definitely gonna get one
@ well, i think it will be hard to get it rear mounted since that port is for their proprietary fitting. Also there is not enough spave to rout it, for the cgs you need to cut the gb
@@wkkkkkk545 well, it's not as adjustable, as the ARC has 3 screws for adjustment, compared to the Nexxus which has 1. It's good that it has it, would have been even better to also have travel stop. The ARC makes it easier to shoot faster, with proper adjustments. That being said, flat triggers may be coming for the Nexxus, soooooo...
Huh i expected it to be a slop brainrot expensive speedQB engine/system... the price is actually decent... are there ways to adjust / swap the nozzle - or is it strictly around that M4 standard lenght? I hope they include more detailed documentation on the engine itself, i dont really see anything, in terms of specs, on the site :))
@@SulfurAirsoft i don't have any more specific details on nozzle length, i assume it would be pretty easy for Mechlabs to release different lengths, but i didn't feel the need for other lengths, between an AEG that usually takes a 20.50mm nozzle, and another one that takes a 21.25. Regarding documentation, I am confident more will come, it was literally released this weekend at MOA in Taiwan, so it's pretty fresh
@@eisensom4908 since it's fully mechanical, the only thing you need to do periodically, is grease the orings inside. Dow33 (paintball grease) would work best
@@battosai823 fortunately, no alignment was needed. The tolerances on this gearbox are very good, and if you straight swap it, into a receiver that was originally from the same gun, it should allign pretty well.
what igl would you use with this? also what do the other options mean like FLO remote line regulator or HPA stock adapter w/ regulator. I wouldn't need one cause i already have a tank and regulator set up right?
This is actually so cool, ive been saying for awhile now that someone needs to figure out a mechanical full auto engine and then what do i find! so cool, definitely gonna get one
Can't wait for a version with the tube routed to the stock
They do sell a variant for 500$
@@r3ddevill Nah, i was saying just rear routed, with no stock adapter, to run stuff like the polarstar cgs
@ well, i think it will be hard to get it rear mounted since that port is for their proprietary fitting. Also there is not enough spave to rout it, for the cgs you need to cut the gb
@@r3ddevill Damn, I wanted that full-auto mechanical trigger for a future build
We are going into production with our C02 stock adapter for this system in the next month.
Very very excited for this engine price is very good compared to other high end engines. Glad to test one of these out soon
I need one ❤ but would have to make mag terminals work for gelsoft setup
nice video bro very good camera quality is fire
very accurate and detailed vid! thanks Bro! 💥
Is there a way for it to operate in a closed bolt configuration?
@Dexter could you include overview of trigger adjustment and compare to Arc1? Question from speedsofter/paintball style :D
@@wkkkkkk545 well, it's not as adjustable, as the ARC has 3 screws for adjustment, compared to the Nexxus which has 1. It's good that it has it, would have been even better to also have travel stop. The ARC makes it easier to shoot faster, with proper adjustments. That being said, flat triggers may be coming for the Nexxus, soooooo...
Please don't cancel this project. This is what hpa airsoft needs. Polar star canceled theirs and so did Mancraft.
Thanks Dexter!
Need to have hose ability to come out back for tankless.
@@hyperslow556gungamer they have it, check the website
Salut, oare ce tip de vopsea folosesi sa iti pictezi replicile ca nu gasesc
@@Tudor2Clean Cerakote se cheama.
Great video bro
Huh i expected it to be a slop brainrot expensive speedQB engine/system... the price is actually decent... are there ways to adjust / swap the nozzle - or is it strictly around that M4 standard lenght? I hope they include more detailed documentation on the engine itself, i dont really see anything, in terms of specs, on the site :))
@@SulfurAirsoft i don't have any more specific details on nozzle length, i assume it would be pretty easy for Mechlabs to release different lengths, but i didn't feel the need for other lengths, between an AEG that usually takes a 20.50mm nozzle, and another one that takes a 21.25.
Regarding documentation, I am confident more will come, it was literally released this weekend at MOA in Taiwan, so it's pretty fresh
Nice video! 🔥
how about its maintainability?
@@eisensom4908 since it's fully mechanical, the only thing you need to do periodically, is grease the orings inside. Dow33 (paintball grease) would work best
Will the engine also fit the classic ssr9? If yes what option of the engine did you choose? (Hpa stock w/ adapter...)
@@snovixik yes, it will fit. I got the Nexxus only, just the engine
How did you do the aligement? Nozzle hopunit?
@@battosai823 fortunately, no alignment was needed. The tolerances on this gearbox are very good, and if you straight swap it, into a receiver that was originally from the same gun, it should allign pretty well.
@ thx for the reply! Just try to order it …..sadly only USA :( how to get in europe
what igl would you use with this? also what do the other options mean like FLO remote line regulator or HPA stock adapter w/ regulator. I wouldn't need one cause i already have a tank and regulator set up right?
@@loganburkey6147 it comes with an igl already, if you choose Nexxus only, and yes, that is the version you need if you have everything else.
Closed or open bolt?
@@DatAirsofttDude open bolt
@DeXteR.AIRSOFT how does it compare to other engines ?
Will this fit TRIDENT MK2 PDW-M and required nozzle alignment? Thank you.
@@Rezer0554 I don't have that specific rifle to test, but alignment was okay in my Krytac LVOA
Will it fit with an esg grip?
@@Shado-e7s can't say, don't have an ESG grip. It's very possible it's going to fit
@@DeXteR.AIRSOFTyes it’s compatible with an ESG grip but you will need to widen the tube hole on the grip like in Dexters video.
subbed
if this engine can get monetized in speed events or conferences it will rival the fusion and maybe the F2
400?! 😂😂 no way. Ill stick to my GBBR
Rip nozzle spring