This definately helped me out 😃 it can be used as a base helmet for alot of things and honestly it helped bring my blackwatch commander from prototype 2 come to life lol
@@Casious_Productions i usually guess, it really depends on what youre using it for. You can always srsw guidelines on it like you would a face on paper (i dont remember the measurements) or figure out the height and measure from the center out
型紙のダウンロードはこちらから(A4サイズでプリントアウトしてください。) Click here to download pattern paper (Please print out in A4 size.) drive.google.com/drive/folders/1r3XFhZno7hpKfhmOhOEi47OANKm7WaLZ?usp=sharing
This is amazing!! I’m making a helmet for Iron Mask/Alphen from Tales of Arise and I was agonising over how to pattern it, this is perfect! Thank you 😭💕✨
Thank you Terran for providing us with your holy pict feed and your sacred Standard Template Construct. I will now reproduce this so that I'll be one with the Machine God.
Hey! It's a great tutorial! And thank you for the free template! I'm just curious, i out together a cardboard mockup to check sizes and two of the stripes didnt align correctly. To be precise, on the template it was the two middle stripes of the front half, one was always longer than the other. Will that be different with foam?
question which feels better to use for a helmet foam or cardboard? I'm just wondering cause cardboard is cheaper to get but if it doesn't feel that great I'd rather do foam?
The base helmet I created is based on the use of EVA foam. If you want to make a base helmet from paper, please watch this video. ruclips.net/video/FHW6e-Ub_mI/видео.html
Tried the Letter pattern, but is seems that the upper top head is longer than the other half. And all of the ends are not the same length. An I doing it wrong? 😢
The pattern paper I made has some parts that are out of place because it is handmade. It seems that there is also a gap depending on the printer when printing out. So, please correct the printed pattern by hand. It shouldn't be a big problem.
How to wear a base helmet depends on the character. You can put a slit on the side of the helmet to put a magnet in it, or put a slit in the back of the head and attach a zipper. Watch the video on how to make a helmet for my character.
One thing troubles me though...how do you know where to cut the eyes??? I mean..you can see what your doing with the thing on your head..and everyones eyes are placed somewhat differently..so how do you do that..measure where the eyes should be..will take a lot of helemet before you get it perfect..if you're not lucky and get it right the first or second time ??
The design of Super Sentai is not a problem because the eyes are wide-ranging. If you want to mark your eye position on the base helmet, mark it from the outside while wearing the base helmet.
The difference from traditional helmets is that the width is narrower. Characters with round heads, such as Kamen Rider from the Showa era, use traditional helmets.
I'm attempting to use this as the base for a Kamen Rider Geats helmet but I cant figure out how to get his headshape to work. Any advice? thank you for all the patterns and videos!!
I have a lot more access to cardboard than i do foam, can anyone confirm if this works with cardboard as well? I found a template similar to the bigger/wider one (on the left at the end of this video) and as much as I like it, I'm always looking for upgrades.
I'm currently making this. I've only drawn the template onto the eva foam, and i intend to cut it out tomorrow (if the job can be done with a box cutter, and thus i don't have to wait for the delivery of my exacto knife) and i'm praying this thing fits my large af head (i can't even find a bicycle helmet in my size) P.S. I'm gonna make the yellow ranger helmet with this particular one. I wanna see you make that one as well, since you're the expert
This paper pattern made A4 size and letter size. The content is exactly the same. Please print out in the paper size you are using. ruclips.net/video/ENG5g5TeGHo/видео.html
you are a god amongst men, this pattern has saved me so much foam waste through trial and error to make a blank helmet.
This definately helped me out 😃 it can be used as a base helmet for alot of things and honestly it helped bring my blackwatch commander from prototype 2 come to life lol
How do you measure where the eyes should be??
@@Casious_Productions i usually guess, it really depends on what youre using it for. You can always srsw guidelines on it like you would a face on paper (i dont remember the measurements) or figure out the height and measure from the center out
型紙のダウンロードはこちらから(A4サイズでプリントアウトしてください。)
Click here to download pattern paper (Please print out in A4 size.)
drive.google.com/drive/folders/1r3XFhZno7hpKfhmOhOEi47OANKm7WaLZ?usp=sharing
Thank you!
Koniciwa..
@@stephengarza2213 Thank you for watching my video.
@@aryantizuannauzitnayra4907 Thank you for watching my video.
こんばんわ~。すいません、型紙を頂きたいのですが、URLがエラーとなってしまいます。一度確認して頂いても宜しいでしょうか?
これはとても役に立ちましたありがとうございます!間違いなくビデオが好きです!
U GIVE TEMPLATE FOR FREE?? OMG..GOD BLESS YOU BRO..
If there is one person who deserves a statue... it would be the one that gives all patterns for free
@@kashcamdyn4995 Dude-
What size the impression must be?
A printers not free…
Absolute legend. Needed a helmet in this exact shape for a cosplay.
This is soooooo helpful because I want to make my own pattern also it’s nice to just have a one of these for costume making
Man your channel is so underrated. You go in to a lot of detail I like that .
this is a real superhero, thank you good man thank you
Thank you for watching my video.
Dude Ive been looking for something like this to start building my LED DJ helmet. Really appreciate you for this.
Thank you for watching my video.
Thank you SO MUCH for the template, this is incredible !!
ベースマスク使わせていただきます!
素人なのですごく助かります!
Ahhh this makes me miss the days when all i did at home is make eva foam helmets.
Thank you for watching my video.
You used to do that way back then?
コスプレというものを知り、一番好きな仮面ライダーの頭部をどうにかしようとして辿り着きました。カッコよすぎます!🎉
とても参考になりました!ありがとうございます!
This is amazing!! I’m making a helmet for Iron Mask/Alphen from Tales of Arise and I was agonising over how to pattern it, this is perfect! Thank you 😭💕✨
Thank you Terran for providing us with your holy pict feed and your sacred Standard Template Construct.
I will now reproduce this so that I'll be one with the Machine God.
Thank you so much for the pattern, your whole channel is incredible !
Thank you for your time and for the template! Great work!
Thx so much! I’m trying to make a dip helmet for cosplay day at my school!
Hey! It's a great tutorial! And thank you for the free template! I'm just curious, i out together a cardboard mockup to check sizes and two of the stripes didnt align correctly. To be precise, on the template it was the two middle stripes of the front half, one was always longer than the other. Will that be different with foam?
The template I made is handmade and not very accurate. sorry.
Japanese craftsmanship at its finest
Thank you for the templates they were right shaped
Nice template. great video. Thank you!!
Amazing work! I would love to see you make a zyuranger blue triceratops helmet
Thank you for watching my video. I am making a new Super Sentai helmet now.
素晴らしいです!!参考にさせていただきます❤
Thank you for the free template, now you've earned a new subscriber
Very cool bro ! Thanks for the free template. It something big too us who cant make good helmet 🙏🙏 bless you
Thank you for watching my video.
Awesome. The paper template fit together (although a bit crumpled LOL) so now its time for the foam!! Thank you.
How do you measure where the eyes should be??
質問です。
同じ100均のマットを使って製作していますが、顎部品を本体マスクに接着するときに裏側の凹凸が相性が悪いのか全然くっつきません。
動画でしっかりくっついているのはなにかコツがあったりしますでしょうか?
こんにちは、その問題を解決できたかどうかわかりません。申し訳ありませんが、ヘルメットを衣装に使用することを考えているので、使用できるかどうか知りたいです。ご清聴ありがとうございます。
Gボンドを薄く塗ってしっかり乾かし、もう一度塗ってしっかり乾かしをアゴの部品とマスクのアゴの部分両方に行うとしっかり接着できます。2度塗りしなかったり、乾燥が甘かったり、片側しか接着剤を塗っていなかったりするとうまく接着できません。
@@jurassicpictures7299 こちらのヘルメットは商用利用しなければ自由に使って大丈夫です。衣装に使って頂いても問題ないです。
Nicely done can’t wait for the next video 👍🏻🙌🏻
Thank you for watching my video.
Thank you so much for this tutorial video
Thanks friend, I'm going to use this base mold for the Cyberpunk 2077 Trauma Team Helmet (by the way, could you teach me how to make this helmet?)
question which feels better to use for a helmet foam or cardboard? I'm just wondering cause cardboard is cheaper to get but if it doesn't feel that great I'd rather do foam?
The base helmet I created is based on the use of EVA foam.
If you want to make a base helmet from paper, please watch this video.
ruclips.net/video/FHW6e-Ub_mI/видео.html
型だけでもカッコいい☆スパイダーマン作って欲しいです(*^^*)
出来たらMCU版の目が動くタイプが良いですね!
アメスパ2のも、良いんじゃないですかね!
Thank you for being so generous!
Perfect just what i needed for my hanami mask
この動画を見てベースマスク作成できました!素晴らしいクオリティで凄いです!質問なのですが…頭のサイズを63cmにするにはどうすれば良いでしょうか?完成して被ったらアゴが出てしまいまして…可能でしたら教えて頂けると嬉しいです
動画を視聴いただきましてありがとうございます。サイズ変更は型紙を印刷するときに拡大してください。(63cmなら105%)
すみません!ありがとうございます!教えて頂いたことをやって、製作したいと思います。本当にありがとうございます!
Thank bro that help me make my first helmet
Thank you! I will use this for kabuto!
Can I use 6mm foam instead of 10mm? The sunken details of the helmet might be too deep if I use 10mm.
Using 6mm foam instead of 10mm gives the base helmet an angular shape. We recommend using 10mm thickness if possible.
this is going to be amazing for my red hood costume
I’m going for red hood as halloween
これでゴーゴーファイブ作れるかな
thank you very much!! This is a very big help for me! :)
Great tutorial but I have a question, are you meant to print 1 and 2 on the same paper or is it meant to be separate?
Please print out 1 and 2 on separate pieces of paper. Then, make a pattern by pasting numbers 1 and 2 onto a large piece of cardboard.
この動画を拝見してベースマスクを作成しております‼︎
とてもわかりやすく勉強になります‼︎
ちなみに少し質問なのですが、張り合わせの部分をもっと段差なくツルっとしたマスクを作りたいのですが、コツなどはありますか?
張り合わせた部分の段差の処理ですが、ワタクシも本当に悩んでおりまして、これといった解決法が見つけられないでいます。強いていうなら、ベースマスクの材料を、COSボードのような密度の高いスポンジシートを使うこと、カットする際に垂直にカットすることくらいでしょうか。目地シールもツルッとした表面にはならないですし、いまだに試行錯誤してます。すみません。
@@PigtailChannel 返信そして色々なアドバイスありがとうございます😊早速教えて頂いた事を試してみます‼️
pigさんの色々な動画を拝見してるのですがドンドン新しい技法とアイディアを盛り込まれてるので本当に凄いですね‼試行錯誤の結果が見えるのでとてもありがたいです‼︎
また、連続での質問で大変恐縮なのですが、樹脂andモリモリパテで加工している動画を拝見したのですが樹脂は何を使われてるのか教えて頂く事は可能ですか?
@@user-fn7to2zx3z 樹脂は、スムースオンのD65という樹脂を少量頂いたのでそれを使いました、ただ、日本では入手しづらいため、現在、代替品にてベースマスクをコーティングする動画を製作中です。これがうまくいけばFRP製のマスクのような外観になると思います。しばしお待ちを。
@@PigtailChannel なんと⁉︎
それは楽しみにしております♪
アップされたら必ず拝見しますね(^^)
コメント失礼します!!!
参考にします⭐️
ちなみに!
同じハサミ使ってます!!!
Wow this Help me so much...Thank you🎉🎉
Thank you!! You´re the best!!
thank you very much... May God bless you...
Sir please make choudenshi bioman helmet too🙏🙏🙏
Thnks ao much.. i learn a lot from your videos
Pig tail is a good man. He shares his talent. He teach other to learn.
I salute you pigtail👌
すごいこれはプロですねあの私もうまいんですけどやっぱりプロの方がいいですコツを教えてください
ワタクシはプロではないので参考になるかわからないのですが、何度も繰り返し作ることが上手くなることにつながると思います。
そうですが、
でもお金がかかってできないと思います。けどやってみます!!コツをありがとうございますんどうやったらこんなに早くカッターで切れますか?
Thanks a lot I needed a prototype to make bondrewd helmet
Why doesn't anyone ever put their creation on..so we can see what it looks like on..or even if the size is correct...why?????
Olá!
Boa noite !
Essas plantilhas me servirão também para o helmet do Nashounaro Kiddo original 1960
似たようなマットでハサミを使って切ったのですが、断面が綺麗に出来なかったせいか、ボンドでくっつけようとしてもうまくくっつかないうえに、ボードを丸くすることも困難でした。
やはりハサミよりもカッターの方がいいのでしょうか?
あとうまく丸くする解決方法はありませんでしょうか?
長文失礼しました。
動画を視聴いただきましてありがとうございます。マットを切断する際はよく切れるカッターを使わないと切断面が荒れてしまいます。曲面にしたい場合はヒートガンで熱を加えて曲げる方法があります。ギャクヨガ様のサイトや動画が詳しいので参考にされると良いと思います。
www.gyakuyoga.com/
Pigtail Channel
なるほど、ありがとうございます!
ありがとう戦隊!超!
ENCONTRE ORO
En otras palabras, tu canal
Gracias :)
Thank you for watching my video.
Really thank you, you're amazing
Tried the Letter pattern, but is seems that the upper top head is longer than the other half. And all of the ends are not the same length. An I doing it wrong? 😢
The pattern paper I made has some parts that are out of place because it is handmade. It seems that there is also a gap depending on the printer when printing out.
So, please correct the printed pattern by hand. It shouldn't be a big problem.
This is gonna be sooo useful for a bloodsport helmet
I made a Bloodsport helmet using a base helmet.
How would you put it on, I have the prices done I just need to know a good way to put it on and able to take it off
How to wear a base helmet depends on the character. You can put a slit on the side of the helmet to put a magnet in it, or put a slit in the back of the head and attach a zipper. Watch the video on how to make a helmet for my character.
Thank you!
this good for Spot (across the spiderverse) cosplay
Si intento pasar la plantilla usando una hoja en la pantalla, que zoom me recomiendan usar
You should make a Dangerous Zombie helmet next.
Thank you for watching my video. It is difficult to make a dangerous zombie helmet. The shape of the head is difficult.
One thing troubles me though...how do you know where to cut the eyes??? I mean..you can see what your doing with the thing on your head..and everyones eyes are placed somewhat differently..so how do you do that..measure where the eyes should be..will take a lot of helemet before you get it perfect..if you're not lucky and get it right the first or second time ??
The design of Super Sentai is not a problem because the eyes are wide-ranging. If you want to mark your eye position on the base helmet, mark it from the outside while wearing the base helmet.
Thank you
アンテのWD.ガスターを作るのに使います!
サンレッドが作りやすそうですね!
動画を視聴いただきましてありがとうございます。どんどん活用してください。
So what did you do differently compared to the conventional helmet?
The difference from traditional helmets is that the width is narrower. Characters with round heads, such as Kamen Rider from the Showa era, use traditional helmets.
初めまして。課題研究として自分で考えて作る創作ライダーの型紙として使わせていただきます。発表の際、引用先として書かせていただきます!
はじめまして。オリジナルの仮面ライダー創作は面白そうですね。完成を楽しみにしてます。
@@PigtailChannel
ありがとうございます!
頑張ります!!
I'm attempting to use this as the base for a Kamen Rider Geats helmet but I cant figure out how to get his headshape to work. Any advice?
thank you for all the patterns and videos!!
I'm currently working on a Kamen Rider Geats helmet. Please wait until the video is released.
凄い技術!
動画を視聴いただきましてありがとうございます。
Thanks
Yo re so kind 😍😍😍😍 Godbless you bro
Thank you for watching my video.
Could really use help with a Spectreman Helmet.
10mmのジョイントマット買って乗り型紙に沿ってきり、くっつけたのですが
先っぽの部分が全て揃わずに凹凸になってしまいました。
買ったマットが高硬度のものだったからでしょうか。おすすめのマットはありますか?
スポンジシートはホームセンターで購入したのでおすすめとかは特にないのですが、貼り付けるときに両端の先っぽを先に接着してから真ん中を接着するようにしたほうがきれいにできると思います。
Thank, great job!!!
thankyou!
I just download your template!
I'm grateful!
you just gained an other subscribe! ;)
Thank you for watching my video.
Комментарий в поддержку канала и ролика, а также труда мастера......+-+--+
おすすめのパズルマット教えてもらえませんか?製品によっては毛羽立つので切りにくかったりします
動画を視聴いただきましてありがとうございます。私が使用しているマットは、ロイヤルホームセンターで販売しているパズルマット10ミリ厚です。ただ、近所のホームセンターがそこしかないので使っているという感じです。
I have a lot more access to cardboard than i do foam, can anyone confirm if this works with cardboard as well? I found a template similar to the bigger/wider one (on the left at the end of this video) and as much as I like it, I'm always looking for upgrades.
How do you measure where the eyes should be??
Good technical video 👍
Thank you for watching my video.
Can you please put the same template you use in the video in the description because I don’t have thick paper and it’s hard to cut the right way
It doesn't have to be graph paper, but any cardboard can be used. A cereal box is also acceptable.
Can you make kamen raider faiz helmet?
Tnx for this bro 💪😊
I want to do the Kamen Rider Black, can you tell me how to do the eyes?
ウルトラマンギンガモチーフの女性ウルトラマンを作ってほしいです❗
Hi great work.. can I ask is the template incomplete as only seen to download 4 a4 sheets and 2 sheets seem to be missing per side ? Thanks
おかげ様でo-maji-oも完成いたしました(๑′ᴗ‵๑)
ただ顔周りのジュエリーシールは廃盤とのことで他のもので代用しましたか💦次はスーパー戦隊ですか、楽しみです。jiou2はやらないのかな?
ついに完成しましたか!お疲れさまでした。オーマジオウを作ることができたなら、ジオウ2でも他のキャラでも作ることができるようになっていると思います。頑張ってください。
I'm currently making this. I've only drawn the template onto the eva foam, and i intend to cut it out tomorrow (if the job can be done with a box cutter, and thus i don't have to wait for the delivery of my exacto knife) and i'm praying this thing fits my large af head (i can't even find a bicycle helmet in my size)
P.S. I'm gonna make the yellow ranger helmet with this particular one. I wanna see you make that one as well, since you're the expert
Did it fit?
@@WohlfordWoodWorks i never even finished it, cause i did a crap glue job. Maybe at some point in the future i'll try it again
はじめまして、こんばんは
今度子ども向けの工作ワークショップをしようと思っているのですが、こちらの型紙を使わせていただいてもよろしいでしょうか?
(ちなみにこのイベントでは利益が目的ではなくボランティア的なものです)
はじめまして。私の作った型紙で良ろしければ、どうぞご自由にお使いくださいませ。
@@PigtailChannel ありがとうございます┏○ペコッ
助かります(*^^*)
Omg thank you so much 😍
繋ぎ目の所は瞬間接着剤でくっつけても大丈夫なのですか?
BigLongGodPenis
つまんな
@BigLongGodPenis きも
@BigLongGodPenis いや、再生リストが
ちょっと引いた
@BigLongGodPenis うわぁ…(゜ロ゜;ノ)ノ
デカレンジャー作ってみよかな
今pigtailさんの型紙でガワ作りに初挑戦しているのですが、なかなか上手くジョイントマットが切れません
何かコツのようなものはありますでしょうか
一年以上も前の動画にすみません
動画を視聴いただきましてありがとうございます。ジョイントマットをカットするときに使うカッターの刃を、「特選黒刃」などの切れ味の良い刃にするのが良いと思います。あとは慣れですね。
Can you teach 555-FAIZ helmet?
that would be awesome!!
Awesome Video!
This is amazing. In terms of paper size , how should I print this?
This paper pattern made A4 size and letter size. The content is exactly the same. Please print out in the paper size you are using.
ruclips.net/video/ENG5g5TeGHo/видео.html
使っているマットの商品名など詳しく教えていただけないでしょうか?
どれを使っていいのかわからなくてとても困っています。