Does the PCIxpress riser and mount system cover up the use of the bottom PCI port on the motherboard? Trying to find one that I could still use an audio card on and still mount the GPU vertically. Thanks!
I have the z73 aswell but mine doesn’t give a fully blacked out display like yours. Its black with a thick grey outline, how do i get it to be fully black?
OK, but I always wondered, how do those fans work like where do they get the power from. Like I’ve them just snap on and magnetize attached to the another fan but where dose the power come from? I don’t see like a main fan with a cable.
I’m considering a very similar build and wondering what temps you’re getting under load for both cpu and gpu? Also what’s your ambient room temperature?
Very good build! Also note that I would but the cpu cooler fans on the side/back because if you put it on the bottom, air bubbles will appear in your aio cooling system. But overall great build!
I have a question, doesn't the use of different fans as Push/pull cause turbulence and that "wooom woom woom woom" sound because of different speed and airflow?
Not only the different fans, but this build is a big negative airflow that creates a vacum. So all your surrounding dust will go inside this case if you keep all panels closed.
just use open RGB for anything. It's probably the best thing you can get, because it synchronises everything and doesn't require any other RGB software.
Haha literally me “Salutations, Mother. This motion picture has found itself in my recommended on RUclips. It has given me great inspiration, to build one just like it for studying.”
Intel i9-13900k ROG strix Z790-A gaming wifi D4 Thermalright intel 12th/13th gen LGA1700 cpu contact frame Samsung 980 pro 1TB PCIe 4.0 NVMe M.2 SSD 7kRead/5kWrite 64GB(4x16GB)G.Skill Trident Z Royal DDR4 3600MHz(F4-3600C18D-16GTRS, CL18-22-22-42 1.35V) Lian Li O11D EVO Segotep KL-1250W PCIe 5.0 Ready, ATX 3.0 Ready, 80+ Gold, Fully Modular 10 Lian Li UNI Fan SL120 RGB White Kraken Z73 RGB 360mm Liquid Cooler with LCD Display(Fans on both sides) Thermalright TF7 Geforce RTX 4090 24GB GDDR6X Neptune(Fans on both sides of Radiator) White Custom Cables Edit* It should cost around $6k USD at the time of my comment
Why do u wipe off the pre-applied thermal paste which is on the kraken Z73 at 7:08 and then apply the thermal paste on the cpu then connect it? is there is specific reason for it?
Very clean, but why did you put the six fans to NZXT to cold 13900k? I think 3 fans is enought. And because of that, build may look much pretty and all fans will be in sight
I was wondering why do you remove the fabric thermal paste?? so the correct way to add thermal paste is in the center like the size of one rice depending how big is the cpu. Nice video.
Can we just have a moment of silence for those who have bad pc and needs new one but is broke and is watching this video while crying and contemplating their life. Edit: Honestly tho this build was super overkill and so beutiful. The new RTX 4090 from Nvidia and new i9 13th gen from Intel and that silver Royal Trident Z Royal.
9:12 why is this case not formatted to keep the gpu at a horizontal level., all around great components otherwise. the ram sticks look great but would have opted for a wider orientation.
I also want to say that I had my CPU cooler oriented in the same manner here and the pump ended up failing within a year. I dont really know the solution for this particular case since someone did mention the GPU cooler is also mounted in a non ideal manner.
"PC for studying"
deep learning(-^O^-)
🗿 to study and learn how to be Profesional in competitive Game.
mom, this 16k monitor for studying too
@@nehumster 🤣
i couldnt agree more
The white and gold/yellow color scheme is one of my all time favorite. So glad to see someone else rocking it
I agree, gold and black as well
What color code are those?
@@jreem2416 yea!
Speaking of gold, why would you put a gold power supply in it? That's like putting 89 in your Bugatti.
It's tacky
This is one of the nicest builds I've seen, I'd love a rig like this :D stunning machine.
That build is wild man. Very good job!
Sike bro. This is one fot the best pc build I have ever seen.
That aesthetic feeling at the end. Wow.. ❤
Stunning build bro 🔥 Looks incredible
I find this looks gross
@@SwebWeb poor
@@koriander.k7377 Black is better
@@SwebWeb it looks superb. You're def in the minority
this build is beautiful
youre the only one ive seen on youtube that actually used a contact frame, THANK YOU
Great video, and build! Also, the music was awesome imo!
Does the PCIxpress riser and mount system cover up the use of the bottom PCI port on the motherboard? Trying to find one that I could still use an audio card on and still mount the GPU vertically. Thanks!
Amazing! Those RAM sticks are brighter than my future.
Lol. Good one
Awesome build! Well done! ❤
Love the build - wondering wher eyou got the GPU cradle in white from? It must be PCI 4.0 as well for the 4090
what screw driver is that, seems pretty good with the long reach
Great build and music.
تجميعة عملاقة جدا تستحق الشراء ... ادعمك بكل قو ة
How did you connect NZXT fans and Lian-Li to work together?
I thought it was better for AIO pump nozzles to be on the right side always. Does it depend on the orientation of the AIO that you can change it?
The music and the build are A1
Great build!!But im curious that why using unifan v1 instead of v2?
Finally, someone who knows about the finer detail of using a different cpu mounting because of cpu bowing.
you find thermalright cpu guide?
First time seeing 6 fans on a liquid cooler, does it work as efficient as it seems?
Hi, i was wondering if the program NZXT CAM is necesary for a correct functionality of the liquid cooling ? beacause it's giving me issues...
I have the z73 aswell but mine doesn’t give a fully blacked out display like yours. Its black with a thick grey outline, how do i get it to be fully black?
Awesome stuff, what tools do you usually use?
What a beautiful thing this build , my dream to build one of these !!!
thats the most beautiful ram ive ever seen in my life
Одна из самых красивых сборок которые я когда либо видел
всё равно устареет
да но только через лет так 5 минимум@@user-ri9di7ox2p
It's beautiful, but I wonder what it looks like after, say, 1 year of usage. With dust building up and such.
Very nice build!
the cooling of the graphics card will not break down if it is at the top of the system? From what I've read, the radiator should always be on top.
Im the subscriber number 1000 😁🥳
OK, but I always wondered, how do those fans work like where do they get the power from. Like I’ve them just snap on and magnetize attached to the another fan but where dose the power come from? I don’t see like a main fan with a cable.
I’m considering a very similar build and wondering what temps you’re getting under load for both cpu and gpu?
Also what’s your ambient room temperature?
-2
@@jacobbarrett6292 try -10 for a 4090 to be at 23
i am sure very hight
@darn You're joking right? That's 23⁰C, not 23⁰F, which makes it 73.4⁰F at idle....
Very good build! Also note that I would but the cpu cooler fans on the side/back because if you put it on the bottom, air bubbles will appear in your aio cooling system. But overall great build!
Wdym isn’t the rad on the side?
I like how people assume they are pros after watching a single video
@@koriander.k7377 its just how i saw it and ive been building pcs for around 1 1/2 years
why ?? there is no relation between fans and air bubbles could please explain
@@koriander.k7377 Stupidity is infinite ruclips.net/video/b6m9Xhzc6Kw/видео.html
請問,影片後面金色的燈效要怎麼調啊?我也是用聯力的積木扇
One Question plz! What's about sound noise of all this fan ? Asking cause I want build the same for music production, mixning and mastering thank's
sweet build!
I have a question, doesn't the use of different fans as Push/pull cause turbulence and that "wooom woom woom woom" sound because of different speed and airflow?
Not only the different fans, but this build is a big negative airflow that creates a vacum.
So all your surrounding dust will go inside this case if you keep all panels closed.
Why did you put 10 exhaust fans and only 3 intake? This would create negative pressure and pulls dust.
awesome video, keep it up!
What software did you use to control your ram? I can't get the Lian Li LConnect to control my ram.
just use open RGB for anything. It's probably the best thing you can get, because it synchronises everything and doesn't require any other RGB software.
Haha literally me “Salutations, Mother. This motion picture has found itself in my recommended on RUclips. It has given me great inspiration, to build one just like it for studying.”
0:26 track got me grooving in bed and whispering sample "it's build a PC time" every beat
Beautiful build mate!
Just wondering if you have had any issues with igame 4090.
“Yes mom i need this for zoom classes”
Do I need to replace the socket and use this contact frame.?
Casue I planning to do intel 13th build.
EXCELENTE CALIDAD!!!
is it possible to stack 2 radiators in one place at this lian li case?
Intel i9-13900k
ROG strix Z790-A gaming wifi D4
Thermalright intel 12th/13th gen LGA1700 cpu contact frame
Samsung 980 pro 1TB PCIe 4.0 NVMe M.2 SSD 7kRead/5kWrite
64GB(4x16GB)G.Skill Trident Z Royal DDR4 3600MHz(F4-3600C18D-16GTRS, CL18-22-22-42 1.35V)
Lian Li O11D EVO
Segotep KL-1250W PCIe 5.0 Ready, ATX 3.0 Ready, 80+ Gold, Fully Modular
10 Lian Li UNI Fan SL120 RGB White
Kraken Z73 RGB 360mm Liquid Cooler with LCD Display(Fans on both sides)
Thermalright TF7
Geforce RTX 4090 24GB GDDR6X Neptune(Fans on both sides of Radiator)
White Custom Cables
Edit* It should cost around $6k USD at the time of my comment
6k? 😬😬😬
Bro went with DDR 4 ram cause, "shiny".
Their money lol
@@DYBenson1 I did too lol
@@DYBenson1 I was thinking about that too couldn’t bro have bought a ddr5 motherboard? Lmfao he obviously got the money
looks cool but what are all those fans cooling?
hopefully that 16pin connector doesn't burn your build. Beautiful build tho
serious question. why do you have 10 exhaust fans and only 3 intake? i thought you needed more intake than exhaust.
3 intakes vs 10 exhausters nice airflow setup
3 intakes is great considering there's not going to be much heat in the case. Both cpu and gpu have rads.
Deserves a custom loop for sure
“Yes mom, I need this for school”
Push pull on the radiators look funny lol.
Why do u wipe off the pre-applied thermal paste which is on the kraken Z73 at 7:08 and then apply the thermal paste on the cpu then connect it? is there is specific reason for it?
When i when to look up the motherboard and psu is sold in aliexpress is that a reliable place ?
Very clean, but why did you put the six fans to NZXT to cold 13900k? I think 3 fans is enought. And because of that, build may look much pretty and all fans will be in sight
13900k is very power hungry and needs all the cooling it can get, that and better circulation for the case.
cause why not? lmao
So motherboards in Asia come with waifu on the box? I looked up "ROG strix Z790-A gaming wifi D4" and see no waifu for the NA release.
amazing build
I was wondering why do you remove the fabric thermal paste?? so the correct way to add thermal paste is in the center like the size of one rice depending how big is the cpu. Nice video.
As long as you have enough thermal paste, it doesn’t matter how you apply or spread it
gpu: "23c bruh"
cyberpunk: "hold my beer"
Yeah mom I need that for studying.
yes mum i need it for school work
Oh my god, just a dream pc really very very nice😍
came for the pc stay for the music
“Yes mom, I need this to open word.”
how to relax, watch chill pc builds
Nice build! Just wondering why you put fans on both the top and bottom of the AIO radiator?
its a push pull config, basically makes it where the radiator is never hot
@@armotives no he did not do the push pull trick, he just put 6 exhaust fans at the top which is too much
I wish you have more info on the posts used in the description
Side intake is better than outtake or anyone wondering.
oh mein gott ist das wunderschön respeckt 👍
Que buena combinación, el color blanco.
Beautiful
Can we just have a moment of silence for those who have bad pc and needs new one but is broke and is watching this video while crying and contemplating their life.
Edit: Honestly tho this build was super overkill and so beutiful. The new RTX 4090 from Nvidia and new i9 13th gen from Intel and that silver Royal Trident Z Royal.
I personally don't like the Silver/Gold versions of the Z Skill
@@emilengstroomno one agrees lol
Ok bot
9:12 why is this case not formatted to keep the gpu at a horizontal level., all around great components otherwise. the ram sticks look great but would have opted for a wider orientation.
i have a question its liquid refrigeration right?
ddr4 on this build, trident royal value ?
hi there people , how does air flow work here ? i can t notice
what is that blue thing he put around in the cpu
What color code did you use for gold???
What does it have to do with long screw drivers
Why don't you show how to put in the fan cables?
Anybody know what vertical bracket he’s using
Hey could you link the screwdriver that you use?
Clean
i love watching these even tho i will never be able to afford any of this
Never say never
Can’t put aio for the gpu there. I will make a video soon on how to place double aio
What are the power supply cables called
Honestly need a longer extension on that power drill, that length isn't safe enough. Enjoy Minecraft at 4000FPS though, nice build.
its so elegant.
I would stare at it for no reason at all if i had this at home😂
W for the contact frame
wtf how does the gpu temp reach 23 degrees? does rtx 40 series provide a really cold thermal inside the gpu or what?
same reaction im at 35 °C custom watercooling and 50 in load
CPU is 44 iddl and 60/70 load at 4.5Ghz not 5.8
what screw driver is that?
Anyone know the kind of screwdriver they are using?
which organs did you assign for it
I also want to say that I had my CPU cooler oriented in the same manner here and the pump ended up failing within a year. I dont really know the solution for this particular case since someone did mention the GPU cooler is also mounted in a non ideal manner.
his rads are side and top. It's fine the pump isn't the highest point in either.