I'm expected to take delivery of a '24 STX SuperCab V8 4X4 from Akins next week. Perhaps I need to talk with you about a leveling kit for it, as I plan to get a set of Fuel 20X9 wheels and K02's or equivalent tires.
I have a 2023 F150 that I put a 2" level on with fuel rebel wheels. The wheels have a -12 offset. Can I run 34s with this wheel offset? I figured I would ask since you guys have pumped out a lot of leveled f150s and have a good idea of what works and what doesn't. Thanks in advance!
@@NickBooth-pm4lc They won’t touch you have about 1/4 to 1/2 inch clearance on the front end. I’ve had them on 2 lariats. One with a 11/2 inch level and the other a 2 inch level. They both work.
No spacers. Can fit 35X12.5R18 on stock wheels without trimming & using a level. It will be less than a 1/4 from sidewall to upper ball joint tho.. 285/75R18 would be a better fit but these 295s is the perfect fit IMO
@@dm45867 so you run 295/70/18 size tires with no issues? Did you like the BFG and Toyos in that size, too? Any reason for switching to M/T? Thanks for the info!
What makes no sense is that you get some people that will rub with this exact set up and some people that swear up and down there’s zero rub anywhere so idk what to think
@@bronsondempsey7812 I think a factor to consider is tire width and wheel offset. If you get a set of wheels and tires that is close to the same as the factory offset and width, just with slightly larger overall diameter tires, I don’t think it would rub. But I’m not 100% sure ha.
@@bronsondempsey7812 nice. My 2021 F-150 has the factory 20” STX wheels, but I eventually want to get aftermarket 18” wheels and 35” tires with a 3” lift kit.
So I have a 2023 F150 XL and I’m installing a 2.5inch leveling kit on the front but worried about that size of tire rubbing the upper control arm because it’s already close to the 275/65 that are on it already so was there space in between when y’all installed those tires
Yall thought I was gone?! Man I back again like real deal with the 1 or 1 F150s. It’s a process not duplication! Big flex!
Facts 💯
Looks great!
any rubbing?
What rim and tire specs are those
I'm expected to take delivery of a '24 STX SuperCab V8 4X4 from Akins next week. Perhaps I need to talk with you about a leveling kit for it, as I plan to get a set of Fuel 20X9 wheels and K02's or equivalent tires.
What psi are you running?
I’m going to be running the same tire set up how much psi?? 295/70/18
Hi.
Have have 2023 f150 3.31 gear ratio.
I wanna to do 2.5 lift and 34s tires, what do you think ?
Thank you
Could you put wheel spacers on that setup to get a little poke or would you get some rub?
Yes like a 1.5” spacer
@@RealDealNealthey don't rub the upa without?
@RealDealNeal I have a 24 powerboost I want to put the same setup on
@@ScoobyDrewski no sir
@RealDealNeal thanks I'm concerned cause I've heard they do and I like this look but was ready to go to a 285/70r18.
Would they run without the level?
No. My 33's barely rubbed before my level.
With the ready lift spacer kit does it make it ride rough? Really been thinking about this kit of my 24 f150 xlt fx4
@@ReelinTension no sir. It will stiffen up the front suspension just a little bit not too bad . Go with a Coilover level kit for best
I have a 2023 F150 that I put a 2" level on with fuel rebel wheels. The wheels have a -12 offset. Can I run 34s with this wheel offset? I figured I would ask since you guys have pumped out a lot of leveled f150s and have a good idea of what works and what doesn't. Thanks in advance!
33 s just sneak by with -12. 34s with -12 will just barely touch.
@@Dieter-fk4yt do they touch the crash bar or the valence? Thank you by the way!
@@NickBooth-pm4lc They won’t touch you have about 1/4 to 1/2 inch clearance on the front end. I’ve had them on 2 lariats. One with a 11/2 inch level and the other a 2 inch level. They both work.
Hi.. Can I use 295 60 20 tires on 2022 ford f150 stx 2wd with 2.5 leveling kit installed. Any help is appreciated. Remember I have 2wd.
You can! I have a 2023 King Ranch 2wd with a Bilstein 5100 level with 295/60/20 KO3s.
@peanutbudr did you cut or trim. My 23 fx4 lariat got 295/60/20s on a 20x9+0 and rubs like hell
@ I didn't have to cut anything. I put the tires on the stock wheels though so I didn't change the offset
Did you need spacers?
I'm wondering the same....I'm worried about upper control arm rubbing 🤔 or should I just go 285/70r18
No spacers. Can fit 35X12.5R18 on stock wheels without trimming & using a level. It will be less than a 1/4 from sidewall to upper ball joint tho.. 285/75R18 would be a better fit but these 295s is the perfect fit IMO
These 295/70 looks beefier compared to the other lead foot f150 on 285/75. 🤔
The width makes it’s look like that
Is that pretty much the biggest tire you can use with a simple 2” level kit without rubbing?
@@dm45867 so you run 295/70/18 size tires with no issues? Did you like the BFG and Toyos in that size, too? Any reason for switching to M/T? Thanks for the info!
What makes no sense is that you get some people that will rub with this exact set up and some people that swear up and down there’s zero rub anywhere so idk what to think
@@bronsondempsey7812 I think a factor to consider is tire width and wheel offset. If you get a set of wheels and tires that is close to the same as the factory offset and width, just with slightly larger overall diameter tires, I don’t think it would rub. But I’m not 100% sure ha.
@@lucasblanchard47 I’m keeping my factory tires (same in this video) and just doing bigger tires. I think this looks good nice and simple oem look
@@bronsondempsey7812 nice. My 2021 F-150 has the factory 20” STX wheels, but I eventually want to get aftermarket 18” wheels and 35” tires with a 3” lift kit.
So I have a 2023 F150 XL and I’m installing a 2.5inch leveling kit on the front but worried about that size of tire rubbing the upper control arm because it’s already close to the 275/65 that are on it already so was there space in between when y’all installed those tires
Whats the number to the dealership?
7708685207
Did you have to change shocks and a arms?