2021 Ford Bronco Sport Oil Change 1.5L Engine FAST & EASY IN 4K

Поделиться
HTML-код
  • Опубликовано: 24 дек 2021
  • Today I will change the oil in my 2021 Ford Bronco Sport with a 1.5L engine. This process is fast and easy and shouldn't take more than 25 minutes if you have all the right tools in front of you. I am using a 5W-20 Full Synthetic Motor Oil for superior protection alongside a genuine Ford Motorcraft FL-910s Oil Filter. You should change the oil every 5000 to 7500 miles depending on how you use your vehicle. I changed the oil in this car at 2500 miles for a break-in oil change, to make sure clean oil is circulating without any wear from breaking in the engine.
    Tool List:
    T30 Screwdriver: amzn.to/3ez2IcB
    16 MM Socket: amzn.to/3z4MwsZ
    Oil Filter Wrench: amzn.to/3mDEdiU
    Clip Removal Tool: amzn.to/3JoNfKl
    Ramps: amzn.to/3z66zau
    Funnel: amzn.to/3mFwSPF
    Parts:
    5W-20 Motorcraft Synthetic Blend Motor Oil: amzn.to/3z9yINN
    Motorcraft FL-910s Oil Filter: amzn.to/3sK45gL
  • ХоббиХобби

Комментарии • 37

  • @jovannyjimenez7266
    @jovannyjimenez7266 2 года назад +1

    Dude thanks for this Video and sharing the links, I'm looking forward to do change the oil on my Bronco! Great tutorial video man!

  • @summerforever6736
    @summerforever6736 5 месяцев назад

    Thanks for the video this is what I was looking for

  • @Eddiee602
    @Eddiee602 Год назад +1

    Thanks for the video very informative. 👍🏼

  • @johnmacqueen1777
    @johnmacqueen1777 11 месяцев назад

    Great video! Thanks.

  • @livlife_tm
    @livlife_tm 7 месяцев назад

    Thank you brother!

  • @michaelboortz8927
    @michaelboortz8927 Год назад +5

    Good to see young men working…

  • @themessyscrapper5010
    @themessyscrapper5010 2 года назад +1

    I love supertech oil. That's all I used on my Toyota Highlander and it had 315,000 miles on it when some birdbrain crashed into me and totaled it. I'd still have that car and by now I would have more than 500,000 miles on it because it was a great car.

  • @jamessowards3822
    @jamessowards3822 2 года назад +4

    The recommended amount of oil is 5.3 quarts. Another source listed 5.5 quarts so your level may register just a little bit low but not a harmful level.

  • @RobustArid379
    @RobustArid379 Год назад +1

    How much do they charge at jiffy lube 10min speed oil changer?

  • @johndaltroff2241
    @johndaltroff2241 Год назад

    Are you sure there wasn't a door on the shroud that can be opened to allow access to the oil plug and filter? I thought I saw that. Just asking, I don't know.

  • @Benerfe
    @Benerfe 5 месяцев назад

    Can you do a coolant change?

  • @ajsmith9995
    @ajsmith9995 Год назад +3

    Nice review. I like to replace the oil pan plug and filter, put new oil in and start the car. Check for leaks underneath and then replace the shroud.

    • @summerforever6736
      @summerforever6736 5 месяцев назад +1

      That is a waste of time !!
      If all tight no leaks !!!

  • @Sami-rp7mf
    @Sami-rp7mf 2 года назад

    Great job. I need to get this done. Oil life shows 45% and this is the first one so thinking to do this now at 4k. With synthetic I guess we can wait until say 6k. Right

  • @AliAli-kc4tv
    @AliAli-kc4tv 2 месяца назад

    How to unlock the 2022 Ford Bronco Sport transmission

  • @creekcomber
    @creekcomber 4 месяца назад

    I hate the shrouds but good vid

  • @angelrivera-cw9be
    @angelrivera-cw9be 2 года назад +1

    Your about a half quart low, it needs to be at the top dot , its operable of course but wouldnt recommend running it at minimum.

  • @samfrancisco8095
    @samfrancisco8095 27 дней назад

    My Jeep Cherokee has a door for the plug and filter access.

  • @randypetty3066
    @randypetty3066 4 месяца назад

    I will find that socket and wrench I dropped when I remove that in that shroud!

  • @stanmalmquist7536
    @stanmalmquist7536 Год назад +1

    What is the correct touque for the drain plug

  • @BeardedFordTech
    @BeardedFordTech 2 года назад +8

    Everything was good. Until you lubed the filter o ring. I'm a master ford tech. And it literally says in workshop manual "do not lubricate filter o-ring". This is something ford put out a while back. It can actually cause the filter to back off. Your supposed to remove old filter wipe the surface clean and install new filter. Other than that. Nice video. Let me know if you need help with anything on it.

    • @Mudblud
      @Mudblud Год назад +4

      Lubed it with dirty oil at that

    • @BeardedFordTech
      @BeardedFordTech Год назад +1

      @@Mudblud for real smh

    • @summerforever6736
      @summerforever6736 5 месяцев назад

      Bull crap makes no different he used used oil for som lubrication you clueless!!!

    • @randypetty3066
      @randypetty3066 4 месяца назад

      The dirty oil on the new filter seal was the way I was taught too many years ago! Thanks for pointing that out.

  • @ThePounder001
    @ThePounder001 2 года назад +1

    Is there not a drain plug crush washer?

    • @silversentrav
      @silversentrav 2 года назад +1

      Just did this on my wife's BB, it has a rubber gasket on the plug. I called the dealer and was told that they didn't stock the gasket; but they had the plug w/ gasket. I just reused the gasket, The gasket is recessed in the plug.

    • @samfrancisco8095
      @samfrancisco8095 28 дней назад

      I've never replaced a drain plug ever in 60 years and over 8 different cars. The only time I did is when the shop I used once with a coupon put the filter and plug on so tight I had to use vice grips to remove the plug because I stripped it and also had to use a screwdriver to pierce the filter with a screw driver to get it off. I do my own oil changes. $100+ now when oil and a filter cost $35 anywhere.

  • @summerforever6736
    @summerforever6736 5 месяцев назад

    Do you have the model number for the filter ford used the one you toke off??
    I wanna do a first oil change at 1000 and I wanna use the same filter so they wont give my friend a hard time later...
    Thanks

  • @FarmerDrew
    @FarmerDrew 9 месяцев назад

    I count 13 T30 screws

  • @ljohnpeoples3106
    @ljohnpeoples3106 9 месяцев назад +2

    Always coat the filter gasket with new not the old oil.

  • @cm1133
    @cm1133 8 месяцев назад +1

    Learn the “flood start” procedure to fill your new oil filter with oil PRIOR to starting the vehicle. This was a procedure that FORD created for these 1.5 L motors since the oil filter is horizontally mounted.

  • @luismontoya5973
    @luismontoya5973 Год назад +1

    Wear goggles my man. You dont wana get oil and metal fragments in your eyes