Clever to use the oil drums! I was thinking of using old bicycle rims as outer rings for my sieve but cutting up a barrel is much more versatile and easy to come by ! Thank you for sharing!
You need plates on the sides to send material back where you want it instead of coming out of the sides. You need your motor above your trommel to keep dust and debris from messing up your motor
You're not wrong but, it doesn't matter. That drum on the trommel would have been in the scrap bin 6 months after it was built. I tried it with drums. They are never truly round. As they flex when they are revolving they are stress fracturing. I solved the problem by rebuilding mine with 30" outer rims from a scrapped tractor.
You guys should install some short guide rails (maybe 1/4 inch) periodically to guide the larger rocks out quickly (like rifling). If you suspend them 2 inches above the screen, they won't interact much with the gravel as it's spinning but will still deflect the bigger rocks.
Well-thought-out and constructed trommel. There is only one major thing that I would have done differently, that being, I would have mounted the motor and pillow block assembly either directly above or behind the trommel unit to keep all the trash away from those necessary parts.
This is the perfect soil seive that i will be making ,although it will be powered by my lister d, thank you so much for the guidance on how to make it cheers Bobby.
Excellent stuff! Great footage and editing and a pretty effective result with the trommel. Really inventive approach to the design and executed more than well enough as _"you're not building a watch!"_ ;) _(I'll be nicking that phrase, thank you!)_
Motors are often under slung as weight of the motor on a pivot beam tensions the belts without need for tension devices. And obviously, this application calls for sealed motor and bearings. Still, an alternative configuration would be an improvement not just for motor health, but better positioning could allow placement of a wheelbarrow (ect) underneath to catch fines which are otherwise pouring on this motor....
Cannot, because the belt will pull the trommel/drum up and off the spinning wheels, which will run out of place. If you hold the drum down, it won’t spin.
Nice invention. I thought about making such roller screener but I decided to make a sloped vibration screen. On this roller I would make frame above and mount the motor above.
If you make concrete with it you should wash it first I think. So .... build a washer and make sure you put a sluice in it to catch any gold or other precious things in the dirt/ sand in the process!
The poor bastard doing all the shovel work was the same guy who built the dog gone thing! Beautiful piece of machinery on the cheap, I do say!!!! I could sure use something like that and someone else to shovel my gravel for me, too. Most of the dirt I'm sifting, thankfully, isn't as coarse as that gravel he's pulling, mostly 3/8" to 1/2" crushed granite and any underlying rocks deeper in the soil bed left behind by the developers. Got a short run of 3-8" river rock I'm clearing from the back yard and re-purposing into some gabion walls & planters, as well as vehicle barriers for the yard out front. Just don't know where I'd store such a behemoth like that sieve! Even as badly as I want one for efficiency of work effort, I'd have to rent some remote city yard space just to store it off the home site. I live in an HOA community OVERLORDED by the "friendly" neighborhood Gestapo and I have a wife who likes everything frilly foo-foo all around her-- she can't bear to see anything looking even slightly industrial roundabout her-- not even a little partitioned storage area behind a blind. "Something's gotta give," I always tell her-- nothing ever does from her. 😆
Good work I appreciate the ideas...I'm gonna make of those too! What size motor did you use and did you like the horsepower of the motor that you did use or would you upgrade it???
Вы очень талантливый и изобретательный человек. Постараюсь сделать что-то похожее на Вашу конструкцию, тоже на основе бочек, для просеивания песка под штукатурку. Спасибо вам за идею и показ поэтапного изготовления конструкции.
2 problems, you cant fully cover due to heat generation from the motor, other it looks as though the weight of the motor assembly is what is being used as a tensioner for the belt. The hole motor assembly needs to be move out to the side and chain driven, with 2-4 rollers on top pressing down to act as the drum stabilizers so there is no misalignment issues.
Super cool, great simple design, and cheap. Going to start a gold trommel build, might steal (er, borrow) some of your ideas. Aussies do stuff right. Subbed. Cheers! Chris.
Can someone tell me what the best elevation in degrees mount the cylinder trommel??? I’m mainly will be using to separate sands, dirt , small pebbles and rock ( fist size)
@@wearebacteria well I was thinking of driving the drum initially but watched a few more videos and bottom rollers looks the best and requires no drive tension as the traction is created with gravity. also its now possible to build other drives off the powered axle driving the drum, like an outfeed conveyor for the fines to load a vehicle
David Emery - It seems to me, the used 2 Standard Fuel Drums! In Canada we called them 45 Gallon Drums! There are smaller Drums, of Similar Ribbed Style, that I have seen, sometimes, that are 20 or 30 Gallon Drums, too! For a tinier one, 5 Gallon Buckets, could be The Base, but would need some Strength added, likely!
He is outside so he isn't exactly going to die from welding galvanized steel when the chance of inhaling fumes is at best zero. I have been welding galvanized steel inside high roof buildings with a breeze blowing through for years and I don't cough or splutter and I am not dead. So, in essence you are wrong because if the situation is right (not enclosed and you grind off the galvanized finish) you don't need respirators.
At least gringo is aware there is a danger when welding galvanized steel . You would be surprised how many folks running around with welding/cutting tools do not know that simple fact . I had been welding almost ten years before I found out it was toxic , fortunately I never worked galvanized prior to that . Better too safe than not safe enough .
Leave the guard on the angle grinder so you don't melt your shirt. Wear goggles or a face shield so the blade doesn't impale your face. Signed...guy who cut his thumb off once and takes power tools much more gracefully. =)
I was inspired by your design and used it for my own version of it. ruclips.net/user/shorts8ZyR0zYPQj4?feature=share I used a treadmill motor for mine. It’s not designed for commercial application so I’m ok with the motor being a little lighter duty. Thanks for the video!
One of the better vids on building a trommel. Thank You!
One of the nicest watch builds I have seen in a while...
Clever to use the oil drums! I was thinking of using old bicycle rims as outer rings for my sieve but cutting up a barrel is much more versatile and easy to come by ! Thank you for sharing!
You need plates on the sides to send material back where you want it instead of coming out of the sides. You need your motor above your trommel to keep dust and debris from messing up your motor
You're not wrong but, it doesn't matter. That drum on the trommel would have been in the scrap bin 6 months after it was built. I tried it with drums. They are never truly round. As they flex when they are revolving they are stress fracturing. I solved the problem by rebuilding mine with 30" outer rims from a scrapped tractor.
You guys are true hacks and I applaud that. Nice build and nice vid.
Excellent idea to use oil drums, nice build Sir.
yes
That's one of the better ones I have seen, thanks for sharing.
Trommel is a great machine to apart soil and mineral , I hope one day I will have the chance to threw soil into it
Fantastic video. Thank you so very much.
Greetings from Portugal.
Fantastic build. Is this thing still operating? Or did the soil muck up the system? Any lessons learned or improvements you’d of made?
I think he learn the quale of matter, supported by his mellow voices
Hi
You guys should install some short guide rails (maybe 1/4 inch) periodically to guide the larger rocks out quickly (like rifling). If you suspend them 2 inches above the screen, they won't interact much with the gravel as it's spinning but will still deflect the bigger rocks.
That is well done!!! Good job brother!!!!
Well-thought-out and constructed trommel. There is only one major thing that I would have done differently, that being, I would have mounted the motor and pillow block assembly either directly above or behind the trommel unit to keep all the trash away from those necessary parts.
Great job! Loved watching you guys set up the shaft!
Look cool, how has it held up? Imma thinking if the bolt heads were inside, an threads outside it might make screen repairs better. Maybe?
Should have mounted the motor above the spoils.
Why do people use angle grinders without the guard fitted? Other than that a great project.
would have liked to see close up of belt around the drum.
Otherwise this is a great video very clear easy to follow.
Many thanks 🍀
I had someone build a sifter for me but I need to have more information about the motor that you used thank you
This is the perfect soil seive that i will be making ,although it will be powered by my lister d, thank you so much for the guidance on how to make it cheers Bobby.
Excellent stuff! Great footage and editing and a pretty effective result with the trommel. Really inventive approach to the design and executed more than well enough as _"you're not building a watch!"_ ;) _(I'll be nicking that phrase, thank you!)_
Nice, one thought: why didn’t you put the motor on top instead of underneath? That would keep dirt out of the running mechanism.
Motors are often under slung as weight of the motor on a pivot beam tensions the belts without need for tension devices. And obviously, this application calls for sealed motor and bearings. Still, an alternative configuration would be an improvement not just for motor health, but better positioning could allow placement of a wheelbarrow (ect) underneath to catch fines which are otherwise pouring on this motor....
Cannot, because the belt will pull the trommel/drum up and off the spinning wheels, which will run out of place. If you hold the drum down, it won’t spin.
Nice invention. I thought about making such roller screener but I decided to make a sloped vibration screen. On this roller I would make frame above and mount the motor above.
I was wondering if it would make sense, to leave one third,of the one Barrel, with the Steel, if that's where you are going to put the Motor!
Thank you so much for giving me a great idea 😊👍
If you make concrete with it you should wash it first I think. So .... build a washer and make sure you put a sluice in it to catch any gold or other precious things in the dirt/ sand in the process!
Great Trommel! Where to buy the belts and pulleys? Thank you
rotary sceen spare parts sapply: www.bestjawcrusher.com/products/rotary_screen/?wuy
Hi there Good job have good day and happy day be safe god bless.
Cool. Cheap options are great indeed!
Now you just need to make a diy conveyor to save that poor bastard doin all the shovel work :P
The poor bastard doing all the shovel work was the same guy who built the dog gone thing! Beautiful piece of machinery on the cheap, I do say!!!! I could sure use something like that and someone else to shovel my gravel for me, too. Most of the dirt I'm sifting, thankfully, isn't as coarse as that gravel he's pulling, mostly 3/8" to 1/2" crushed granite and any underlying rocks deeper in the soil bed left behind by the developers. Got a short run of 3-8" river rock I'm clearing from the back yard and re-purposing into some gabion walls & planters, as well as vehicle barriers for the yard out front. Just don't know where I'd store such a behemoth like that sieve! Even as badly as I want one for efficiency of work effort, I'd have to rent some remote city yard space just to store it off the home site. I live in an HOA community OVERLORDED by the "friendly" neighborhood Gestapo and I have a wife who likes everything frilly foo-foo all around her-- she can't bear to see anything looking even slightly industrial roundabout her-- not even a little partitioned storage area behind a blind. "Something's gotta give," I always tell her-- nothing ever does from her. 😆
I'm so blessed my Mrs grew up mining... Anything like this that means not doing it by hand is OK with her.
nicely done
Good work I appreciate the ideas...I'm gonna make of those too!
What size motor did you use and did you like the horsepower of the motor that you did use or would you upgrade it???
Nice!
Вы очень талантливый и изобретательный человек. Постараюсь сделать что-то похожее на Вашу конструкцию, тоже на основе бочек, для просеивания песка под штукатурку. Спасибо вам за идею и показ поэтапного изготовления конструкции.
superbly made.
Berispirasih jos ❤️👍
Add a screw drive which feeds the mechanism, so you don't have to shovel everything in :)
very good
How did you join the 2 barrels? Weld or that angle iron inside?
getting pretty snazzy with that camera work and editing, you're on your way to mastering the hill and media.
Very nicely done looks like it works great
Браво ! Мастер !
I would at least cover the motor all the way with metal so no dirt gets in it.
GREAT SCREENER!
I would rather have it above the trommel away from the dirt's path.
@@georgembugua1882 Exactly. If not above, at least to the side.
2 problems, you cant fully cover due to heat generation from the motor, other it looks as though the weight of the motor assembly is what is being used as a tensioner for the belt. The hole motor assembly needs to be move out to the side and chain driven, with 2-4 rollers on top pressing down to act as the drum stabilizers so there is no misalignment issues.
郭佳美
I LIKE THIS GUY !!!!!
Great!
Super cool, great simple design, and cheap. Going to start a gold trommel build, might steal (er, borrow) some of your ideas. Aussies do stuff right. Subbed. Cheers! Chris.
Can someone tell me what the best elevation in degrees mount the cylinder trommel???
I’m mainly will be using to separate sands, dirt , small pebbles and rock ( fist size)
Excellente vidéo
👍👍👍
How did you attach the screen to the inside of the barrel?
Well done! Very impressive guys :)
Nice design.
The motor should be above the trommel, and it should be directly attached to the trommel
should it ? the best ones ive seen drive the rollers not the drum
@@matthewheffernan3877 Yeah, no idea why I said that.
@@wearebacteria well I was thinking of driving the drum initially but watched a few more videos and bottom rollers looks the best and requires no drive tension as the traction is created with gravity. also its now possible to build other drives off the powered axle driving the drum, like an outfeed conveyor for the fines to load a vehicle
U r the best
Groovey man ..😁
A small version would be great for prospecting.
David Emery - It seems to me, the used 2 Standard Fuel Drums! In Canada we called them 45 Gallon Drums!
There are smaller Drums, of Similar Ribbed Style, that I have seen, sometimes, that are 20 or 30 Gallon Drums, too!
For a tinier one, 5 Gallon Buckets, could be The Base, but would need some Strength added, likely!
@@robertweekley5926 Thanks for the info, much appreciated.
Wish I had the dimensions you used to copy build one
when you weld go nice and slow pretend you are a machine this way you will get great beads.
Very good build, and will easily pay for its self
You're not going to live long welding galvanized without some kind of respirator or at least a fan to blow those fumes away
He is outside so he isn't exactly going to die from welding galvanized steel when the chance of inhaling fumes is at best zero. I have been welding galvanized steel inside high roof buildings with a breeze blowing through for years and I don't cough or splutter and I am not dead. So, in essence you are wrong because if the situation is right (not enclosed and you grind off the galvanized finish) you don't need respirators.
At least gringo is aware there is a danger when welding galvanized steel . You would be surprised how many folks running around with welding/cutting tools do not know that simple fact . I had been welding almost ten years before I found out it was toxic , fortunately I never worked galvanized prior to that . Better too safe than not safe enough .
Leave the guard on the angle grinder so you don't melt your shirt. Wear goggles or a face shield so the blade doesn't impale your face. Signed...guy who cut his thumb off once and takes power tools much more gracefully. =)
not building a watch , I will have to remember that one !!!!!
Nice job, but protect your motor better.
Do you sell it ?
yes, rotary screen $ cost: www.bestjawcrusher.com/products/rotary_screen/?wuy
excellent
WHAT IS THE RPM RATE FOR THIS ONE?
Wtf. There is not a set speed
should re-mount the motor on top
We always say "we not biulding a piano" - east texas
es bueno el diseño pero horrible la implementacion Como va a dejar que al sistema de fuerza( motor y poleas le cae tierra Horrible esa parte)
Двигатель переставь сверху бочки и будет тебе счастье! ;-))
Put the motor on the top
Hi, you could also sell seved earth to the gardeners
YeeeeeeeeHaaaaaaaa
The motor breaks. The sand entrance is bad.
I see you dont like washers...
Put the electric motor over the trommel , not under....
Если взять обода от велосипедных колёс , то можно быстрее собрать такую сеялку .
I would love you to build me one lol
وضع المحرك خطأ كان يجب ان يكون فى الاتجاه الاعلى وليس الاسفل
I did the same in 2007 ))
Ha! You started with a small cutting wheel ..ha!
saludos GRUPO ZAWARY
Движок сверху поставить религия не позволяет?!
I was inspired by your design and used it for my own version of it.
ruclips.net/user/shorts8ZyR0zYPQj4?feature=share
I used a treadmill motor for mine. It’s not designed for commercial application so I’m ok with the motor being a little lighter duty.
Thanks for the video!
Dirt is falling on the motor...
Playback at 1.5x
sound like the man behind the camera is short of knowledge so not making watch!
off grid....built with electric tools
Bryant Valenti You can go off grid and still have power you know..
poor design
F for machine A plus for work effort