Thank you for this wonderful resource! As a fellow kludgery enthusiast I was planning a similar build in my head and you have saved me a ton of guesswork and testing. I'll be sure to credit you appropriately when my neighbors invariably stick their heads out and ask "what the hell are you building now?!?". Cheers
I built a trommel last year and manually rotated it for about 4 tonnes of dirt... didnt even cross my mind to set it up with my drill in the same fashion... genius
Great to hear Gillian. Cordless drills with their size, power and variable speed motor can be used for many things. I used one to make syllabub when I did not have a food mixer! All the best with all your projects.
Great idea using a drill to motorize your trommel. Much simpler than stepping down an electric motor with pulleys and belts. I don’t know what this would do to the life of your drill. Very nice. I guess you could say your wife “ inspired” you. Greetings from Maine.
Best and simple design. I like also the proper size wheel borrow under it, that is wide and bigger in size and has leveled rim top. And the whole machine is light weight.
This is an excellent project and easy design. I am going to try it as soon as possible. One question, can plastic garden mesh be used for this instead of wire mesh since it would be much cheaper for the smaller aperture holes?
Hello Hamza. I think that plastic mesh would work as long as it was stiff enough for the material you are sieving. For example I was recently separating large gravel from soil and this was heavy so the stiff wire was adequate. However if you were simply trying to separate sticks from fine compost, then stiff plastic mesh might be strong enough. Maybe put a shovel full of the material you want to work with onto a bit of the mesh you are thinking of using and pick it up and move it around to get an idea of whether the mesh is stiff enough or will distort under the weight of the material. Good Luck!
Very nice job, I tried reproducing this weekend. I opted for placing the drill with a short axle and wheel attached on the middle rim. When I loaded the cylinder with some wet / heavy compost, it bogged down my drill and the clutch disengaged I assume because it was too much torque. I have a ryobi impact driver/drill. Just wondering if you or anyone else experienced this. I have another drill I can try that has an adjustable clutch setting. Also considered using a "grooved" wheel on the drill and using an old innertube to go around the middle rim and groove wheel. This would keep a little tension on the cylinder pressing against the outer casters.
Thanks Scott. I have no experience with impact driver/drills. Most tools have a setting which often looks like a twist drill which switches off the clutch function. It you are using wet/heavy stuff maybe try and dry it out - even if you just put an old bit of iron or tarp over it for a few days. Also use smaller shovelfuls and go a bit slower so as not to overload the drill. Increasing the slope of the trommel might break up the material a bit more and move it through quicker. Good luck.
@@epicson4274 Hello Epicson. I think rubber sounds best. You want something really “grippy” so there is less chance of slipping. The wheels I used were about 100mm (four inches) in diameter.
@@esbreidenbach Hello Esbreidenbach. I have never used an impact driver so not sure how they operate. Try the other drill on the “drill” setting i.e. no clutch. Yes an old inner tube as a drive around the middle rim might work well. It is keeps bogging down you may have to just go more slowly and put less material in at a time or let the material dry out a bit. Good luck.
@@lauristonmuirhead1210 yes you are correct, soft rubber is best for grip and as well as a larger diameter wheel also helps grippiness. Thank you for responding , but these wheels are hard to find because they usually comes is widths of 2 inchs +, which exceeds the width of the bicycle rim.
Thanks for the comment Dan. You are right, t is a DIY rather than commercial option. I and others have used it for several hours at a time and the drill is still going Well. If using corded always be wary of trip and electrocution hazard of trailing 240V leads in the garden. Good luck with the gardening.
You probably dont care but if you are stoned like me atm you can watch pretty much all of the latest series on Instaflixxer. Been watching with my gf during the lockdown :)
KISS Keep It Stupidly Simple. Fair play no washing machine motor pulley and belt, just a power drill. Have a cord drill I have discarded that now will have a new purpose :)
very nice back yard engineered sieve, I bought a used cement mixer to pulverize leaves. I fill the mixer with leaves, toss in a few tennis ball size stones and run the mixer, this pulverizes the leaves into small pieces that I add as mulch to my garden and flower beds. you could use brick pieces, short pieces of chain, or anything that will beat the leaves into smaller pieces as the mixer turns. I would attach legs with wheels or casters to this seive so I could move it around in the garden to the place where I wanted the compost to be added. I would also use a 12v lawnmower battery and small 12v motor to spin the sieve, the battery can be kept charged by a small solar panel.
Thanks Roy Hoco. Great idea of yours for pulverising stuff. Legs would be a good addition to the sieve but I would try to make them fold so you can still use it on a wheel barrow if required. Also getting the slope right is important as this determines the speed at which material travels down the sieve tube. The height of my two wheeled barrow in the video was just right for me and I could slope it with the right sized chock under one wheel.
The flat is way simpler with all kind of shaking motor that can be used. It can also build to be portable and storage. The round one is very hard to implement with motor and way too big for storage or transport. I stick with the flat type and I will build one.
Can you tell me about the drive wheels? I'm guessing you are not in the US. Can you say what kind of wheels they are and where to find them? Can you describe their makeup and dimensions? Thanks
Hello Sumnerbrent. I am in Australia. We have a big hardware chain called Bunnings where I buy most of my bits and pieces. The wheels appear to be nylon with fairly grippy rubber tyres and there is enough of a tube on the axle to be able to drill a small hole so you can put a split pin or similar to fix the wheels to the axle. As per the video the two wheels on the long shaft are fixed to the axle so when the drill turns the axle the wheels turn. The other two wheels are free running. Here is a link so you can see what the wheels look like www.bunnings.com.au/ambassador-100mm-white-plastic-centre-wheel-and-rubber-tyre_p3942885 I am sure you will be able to find something similar - obviously you have to match the wheel hole to the diameter of whatever you are using for the axles. I think I used 10mm aluminium (about 3/8 inch aluminum) tube but it was fairly delicate and would be easy to bend if it gets knocked around. Stainless steel or gal. rod might be more robust.
@@lauristonmuirhead1210 Thanks for your reply! Your project was inspirational! I built a similar unit over the last few weeks based on yours. I ended up finding replacement training wheels on Amazon that seem to be about a match for what you used on yours. I couldn't find an aluminum rod in the correct length so I settled for steel 5/16th. My trammel is 4 feet in length and I found I didn't need the center rim. The wood stringers seem to carry the load fine. I used wood from an old pallet for the frame as in the original video. This unit is working great! I'll send you a picture. Thanks for sharing your project.
Outstanding! This is what I’m trying to build. Hopefully I’ll post my creation when I’m done. My problem is adhearing the wheels to the axle. I read your response below on drilling a hole through the castor, but I don’t see how your drill was able to fit the drill that close to the tire. Excellent engineering sir!
Hello Kevin. Sorry I have been out of action for a while! I have not had any soil analysis done but I guess the soil might be quite high in iron which may cause the red colour. Like a lot of Australian soils, it is very old and compacted and the topsoil is fairly thin and delicate. It needs a lot of organic matter, compost etc. but seems to grow things quite well especially citrus. Happy gardening!
Hello Paolo. Thank you. I was able to process about one tonne or one cubic metre of soil on one battery charge, so maybe one hour of hard work on one battery charge. I have three batteries charging so I could go all day. Sadly my body does not have any spare batteries so I do other more gentle jobs in between. Happy gardening.
Well said Stephen. The screen in the video has apertures of about 20mmx10mm but since then I needed a finer screen to screen pebbles out of some good top soil and I just inserted a bit of mesh with 5mmx5mm inside the existing screen and again secured with zip ties. Works well. Thanks for pointing that out. I suggest starting with the bigger screen which will be made of more robust wire which will be able to support an finer screen that might be used later.
Hello Clive Francis. See my reply to Aaron. As long as the sifter runs fairly freely and is not filled too full at any one time, I think it would take a very long time to burn the drill out - those drills are very tough.
I definitely would put in a couple of bearings, a few bushings and a proper motor. Good grief, those hobbyists drills don't last very long using them for drills, let alone a motor.
Hello jenky1044. There are definitely good and bad cordless drills. I have found the Ryobi products from Bunnings in Australia to be extremely good value for money (I do not get any sponsorship from them). It is not very clear in the video but I can sift nearly a tonne of dirt on one charge of the battery. If you are sensible about how much load you put on the trommel it should last a long time. I have various Ryobi tools and have treated them pretty harshly, especially the drill - I built a fence a while back drilling many 600mm deep holes in hard dirt with a 50mm auger etc. See my fire fence video. In five years the drill has not died yet. I agree it is not “busy tradesperson” standard but at the price I don’t expect that. Also agree bearings etc. good for professionals but watch out for that cord - always a trip and electrocution hazard. Even the contractors are now going cordless electric. Have a look at the Stihl range. Good luck.
Hello Java OpenSource. Certainly that could work but would add a lot of complexity. I have a solar roof top system and use all my gardening tools etc. during the day so the batteries are charged almost exclusively by solar. If you have not got a roof top solar system, I strongly recommend having a good quality system installed. Good for you (save money in the long run) and good for the planet!
Great idea using a trill on the wheel, ... I might to the same with an old corded drill I've got, as I don't want to inadvertently burn out my good cordless one, but otherwise, thanks.
Thanks Aaron Wadzinski. I recommend cordless. Cords are easy to trip on and limit how far from power you can operate and introduce a high voltage shock risk as well. If you use a corded drill please be very careful to run the cord safely. The cordless drills are incredibly robust. I have used mine really hard and it has not stopped yet after several years. I have drilled post holes in hard ground with a 40mm (11/2 inch) auger with it, left it out in the rain etc. It will not die! I can sieve about half a cubic metre (2/3 cubic yard) of soil on one charge of a 1.5 Ah battery.
Hello Otrotland. You can certainly use a corded electric drill if you are close enough to mains power. The advantage of the cordless drill is that you don’t have to be near mains power and you don’t have dangerous leads lying around acting as trip hazards etc. Good luck with your projects.
I can see a use for some sorting, but NEVER for putting your existing garden soil through... you’re absolutely destroying/killing whatever fungal growth and microbial life you may have grown over the season. This is a No-Till gardeners worst nightmare. Please watch Kiss the Ground on Netflix.
You are right Garth that fungal hyphae will be broken up but fungal spores and microbes are microscopic and very tough and if you look after your soils they should regrow pretty quickly. Thank you for the Kiss the Ground recommendation - wonderful.
@@lauristonmuirhead1210 you might also enjoy many RUclips talks by Dr. Elaine Ingham, founder of the Soil Food Web School, Dr. Christine Jones, soil microbiologist, and farmer Gabe Brown, successful Regenerative Ag practitioner.
"I'm Lauriston, and if your life has felt incomplete without a DIY automated trommel, then this is the RUclips for you."
I love the humor in this video
Thanks Ricky. Good luck.
Very entertaining with great sense of humor. 😂
Thank you for this wonderful resource! As a fellow kludgery enthusiast I was planning a similar build in my head and you have saved me a ton of guesswork and testing. I'll be sure to credit you appropriately when my neighbors invariably stick their heads out and ask "what the hell are you building now?!?". Cheers
I built a trommel last year and manually rotated it for about 4 tonnes of dirt... didnt even cross my mind to set it up with my drill in the same fashion... genius
Thanks Anthony Reeves. Just think of the gym fees you have saved!
Would love it if just one of these videos would show us where to get the wheels and axle
I like this. Lot's of trommels seem to use an old motor out of something, which is beyond my capabilities... but I have a cordless drill!
Great to hear Gillian. Cordless drills with their size, power and variable speed motor can be used for many things. I used one to make syllabub when I did not have a food mixer! All the best with all your projects.
Great idea using a drill to motorize your trommel. Much simpler than stepping down an electric motor with pulleys and belts. I don’t know what this would do to the life of your drill. Very nice. I guess you could say your wife “ inspired” you. Greetings from Maine.
With a lifetime warranty from Ridgid power tools, you won't have to worry about a burning out the drill.
Best and simple design. I like also the proper size wheel borrow under it, that is wide and bigger in size and has leveled rim top. And the whole machine is light weight.
Thanks Sergey. Good luck with all your garden projects.
I don’t know why, but I need to make one of these! Thanks for the video Lauriston!
You never know when you might need one! Good luck and thank you for commenting!
@@lauristonmuirhead1210 it actually inspired me to make one myself! I’ll upload the video
@@TalesOfTheGarden Wonderful news! I look forward to the video. Enjoy the journey as well as the destination!
I like the design with the small electrical motor and direct gearing. 🌅
Clever me lad !
Not so many millenials with your subtle wit.
Cheers
Thanks Kitasuhill but think what sturdy thumbs they will have from all that texting!
@@lauristonmuirhead1210 these projects keep us young Lauriston ! Good on ya !
Wahou congratulation for this marvelous idea!! 🤩
would you please put detailed info of parts and their sizes that you used for all of us who are engineering challenged?
Nicely done! I'm surprised the drill motor can handle that long cycle of use, but terrific execution and innovation.
Awesome project, thank you for sharing this one!
Thanks Mr Unter. It was fun to do. Must get around to do some more!
Thanks Mr Unter. It was fun to do. Must get around to do some more!
👍For the demonstration. Good design. Are you considering commercial easy assemble designs. This is great for small yard gardens.
Great video. I’m going to Bunnings to get those little wheels to make mine (and avoid Costa‘s costly castors;-)
This is an excellent project and easy design. I am going to try it as soon as possible. One question, can plastic garden mesh be used for this instead of wire mesh since it would be much cheaper for the smaller aperture holes?
Hello Hamza. I think that plastic mesh would work as long as it was stiff enough for the material you are sieving. For example I was recently separating large gravel from soil and this was heavy so the stiff wire was adequate. However if you were simply trying to separate sticks from fine compost, then stiff plastic mesh might be strong enough. Maybe put a shovel full of the material you want to work with onto a bit of the mesh you are thinking of using and pick it up and move it around to get an idea of whether the mesh is stiff enough or will distort under the weight of the material. Good Luck!
Very nice job, I tried reproducing this weekend. I opted for placing the drill with a short axle and wheel attached on the middle rim. When I loaded the cylinder with some wet / heavy compost, it bogged down my drill and the clutch disengaged I assume because it was too much torque. I have a ryobi impact driver/drill. Just wondering if you or anyone else experienced this. I have another drill I can try that has an adjustable clutch setting. Also considered using a "grooved" wheel on the drill and using an old innertube to go around the middle rim and groove wheel. This would keep a little tension on the cylinder pressing against the outer casters.
Thanks Scott. I have no experience with impact driver/drills. Most tools have a setting which often looks like a twist drill which switches off the clutch function. It you are using wet/heavy stuff maybe try and dry it out - even if you just put an old bit of iron or tarp over it for a few days. Also use smaller shovelfuls and go a bit slower so as not to overload the drill. Increasing the slope of the trommel might break up the material a bit more and move it through quicker. Good luck.
Hi lauriston, do you recommend polyurethen or rubber wheels for this build? And whats the best size wheels?
@@epicson4274 Hello Epicson. I think rubber sounds best. You want something really “grippy” so there is less chance of slipping. The wheels I used were about 100mm (four inches) in diameter.
@@esbreidenbach Hello Esbreidenbach. I have never used an impact driver so not sure how they operate. Try the other drill on the “drill” setting i.e. no clutch. Yes an old inner tube as a drive around the middle rim might work well. It is keeps bogging down you may have to just go more slowly and put less material in at a time or let the material dry out a bit. Good luck.
@@lauristonmuirhead1210 yes you are correct, soft rubber is best for grip and as well as a larger diameter wheel also helps grippiness. Thank you for responding , but these wheels are hard to find because they usually comes is widths of 2 inchs +, which exceeds the width of the bicycle rim.
Brilliant! Best I’ve seen!
Wireless drill are not meant to be used continuously. Only corded device.
Thanks for the comment Dan. You are right, t is a DIY rather than commercial option. I and others have used it for several hours at a time and the drill is still going Well. If using corded always be wary of trip and electrocution hazard of trailing 240V leads in the garden. Good luck with the gardening.
That is superb! I need to make one of these
Thank you mijangoz. Good luck with your project.
Fantastic video clip, really appreciate your efforts, great personality
Thank you
Thanks Ian Critcher. It was fun doing it. Carpe Diem!
Bahahaha 😂😂😂 y'all are hysterical!!! ❤❤❤❤❤ this video!!!
Thank you Gordon. Wife is very good gardener so the automatic sieve meant she can do more of her own gardening!
You probably dont care but if you are stoned like me atm you can watch pretty much all of the latest series on Instaflixxer. Been watching with my gf during the lockdown :)
@Cristian Spencer definitely, I have been watching on instaflixxer for months myself =)
This would be also a really good trommel for gold mining, Modifying the mesh and adding a pvc pipe would make it a good gold trommel
KISS Keep It Stupidly Simple. Fair play no washing machine motor pulley and belt, just a power drill. Have a cord drill I have discarded that now will have a new purpose :)
Lovely, so well done and so nice to see you!!!
Thanks Huntercorp Holdings. I am honoured.
very nice back yard engineered sieve, I bought a used cement mixer to pulverize leaves. I fill the mixer with leaves, toss in a few tennis ball size stones and run the mixer, this pulverizes the leaves into small pieces that I add as mulch to my garden and flower beds.
you could use brick pieces, short pieces of chain, or anything that will beat the leaves into smaller pieces as the mixer turns.
I would attach legs with wheels or casters to this seive so I could move it around in the garden to the place where I wanted the compost to be added. I would also use a 12v lawnmower battery and small 12v motor to spin the sieve, the battery can be kept charged by a small solar panel.
Thanks Roy Hoco. Great idea of yours for pulverising stuff. Legs would be a good addition to the sieve but I would try to make them fold so you can still use it on a wheel barrow if required. Also getting the slope right is important as this determines the speed at which material travels down the sieve tube. The height of my two wheeled barrow in the video was just right for me and I could slope it with the right sized chock under one wheel.
The flat is way simpler with all kind of shaking motor that can be used. It can also build to be portable and storage. The round one is very hard to implement with motor and way too big for storage or transport.
I stick with the flat type and I will build one.
Can you tell me about the drive wheels? I'm guessing you are not in the US. Can you say what kind of wheels they are and where to find them? Can you describe their makeup and dimensions? Thanks
Hello Sumnerbrent. I am in Australia. We have a big hardware chain called Bunnings where I buy most of my bits and pieces. The wheels appear to be nylon with fairly grippy rubber tyres and there is enough of a tube on the axle to be able to drill a small hole so you can put a split pin or similar to fix the wheels to the axle. As per the video the two wheels on the long shaft are fixed to the axle so when the drill turns the axle the wheels turn. The other two wheels are free running. Here is a link so you can see what the wheels look like www.bunnings.com.au/ambassador-100mm-white-plastic-centre-wheel-and-rubber-tyre_p3942885 I am sure you will be able to find something similar - obviously you have to match the wheel hole to the diameter of whatever you are using for the axles. I think I used 10mm aluminium (about 3/8 inch aluminum) tube but it was fairly delicate and would be easy to bend if it gets knocked around. Stainless steel or gal. rod might be more robust.
@@lauristonmuirhead1210 Thanks for your reply! Your project was inspirational! I built a similar unit over the last few weeks based on yours. I ended up finding replacement training wheels on Amazon that seem to be about a match for what you used on yours. I couldn't find an aluminum rod in the correct length so I settled for steel 5/16th. My trammel is 4 feet in length and I found I didn't need the center rim. The wood stringers seem to carry the load fine. I used wood from an old pallet for the frame as in the original video. This unit is working great! I'll send you a picture. Thanks for sharing your project.
Outstanding! This is what I’m trying to build. Hopefully I’ll post my creation when I’m done. My problem is adhearing the wheels to the axle. I read your response below on drilling a hole through the castor, but I don’t see how your drill was able to fit the drill that close to the tire. Excellent engineering sir!
Great video!
"I've got better things to do" - just wait until the award-winning vintage comes in ;)
Instant subscribe ❤
Interesting but my garden is too small...........at the moment. 😉 There is a neat color to your soil,almost red. Why is it that color?
Hello Kevin. Sorry I have been out of action for a while! I have not had any soil analysis done but I guess the soil might be quite high in iron which may cause the red colour. Like a lot of Australian soils, it is very old and compacted and the topsoil is fairly thin and delicate. It needs a lot of organic matter, compost etc. but seems to grow things quite well especially citrus. Happy gardening!
Excellent, thank you!
Beautiful
Good job
Thanks. It was fun and has been useful to lend to friends.
Great video!
How long can you use it before recharging the battery?
Hello Paolo. Thank you. I was able to process about one tonne or one cubic metre of soil on one battery charge, so maybe one hour of hard work on one battery charge. I have three batteries charging so I could go all day. Sadly my body does not have any spare batteries so I do other more gentle jobs in between. Happy gardening.
@@lauristonmuirhead1210 Thank you Lauriston. Happy gardening to you too :-)))
Excelente. Felicitaciones. Muy práctico. Saludos desde Chile. Jaime
Gracias Jaime Bobadilla.
🎉 good idea
One feature of this design is the ability to swap screens with different sized mesh .
Well said Stephen. The screen in the video has apertures of about 20mmx10mm but since then I needed a finer screen to screen pebbles out of some good top soil and I just inserted a bit of mesh with 5mmx5mm inside the existing screen and again secured with zip ties. Works well. Thanks for pointing that out. I suggest starting with the bigger screen which will be made of more robust wire which will be able to support an finer screen that might be used later.
Thank you ❤️
If Costas castors cost a carton, how many cartons would Costas castors cost?
Brilliant!!
Well done!!!
Really excellent solution. Thanks for sharing!
Thanks efyHealth. Good luck.
how long will the drill last before it burns out?
Hello Clive Francis. See my reply to Aaron. As long as the sifter runs fairly freely and is not filled too full at any one time, I think it would take a very long time to burn the drill out - those drills are very tough.
Great thinking!
Thanks Steve Vise. These cordless drills are excellent as a variable speed drive in all sorts of applications.
Genius
Excellent!
Thanks Artful.
Respect!
I definitely would put in a couple of bearings, a few bushings and a proper motor.
Good grief, those hobbyists drills don't last very long using them for drills, let alone a motor.
Hello jenky1044. There are definitely good and bad cordless drills. I have found the Ryobi products from Bunnings in Australia to be extremely good value for money (I do not get any sponsorship from them). It is not very clear in the video but I can sift nearly a tonne of dirt on one charge of the battery. If you are sensible about how much load you put on the trommel it should last a long time. I have various Ryobi tools and have treated them pretty harshly, especially the drill - I built a fence a while back drilling many 600mm deep holes in hard dirt with a 50mm auger etc. See my fire fence video. In five years the drill has not died yet. I agree it is not “busy tradesperson” standard but at the price I don’t expect that. Also agree bearings etc. good for professionals but watch out for that cord - always a trip and electrocution hazard. Even the contractors are now going cordless electric. Have a look at the Stihl range. Good luck.
why not add a solar motor
Hello Java OpenSource. Certainly that could work but would add a lot of complexity. I have a solar roof top system and use all my gardening tools etc. during the day so the batteries are charged almost exclusively by solar. If you have not got a roof top solar system, I strongly recommend having a good quality system installed. Good for you (save money in the long run) and good for the planet!
Great idea using a trill on the wheel, ... I might to the same with an old corded drill I've got, as I don't want to inadvertently burn out my good cordless one, but otherwise, thanks.
Thanks Aaron Wadzinski. I recommend cordless. Cords are easy to trip on and limit how far from power you can operate and introduce a high voltage shock risk as well. If you use a corded drill please be very careful to run the cord safely. The cordless drills are incredibly robust. I have used mine really hard and it has not stopped yet after several years. I have drilled post holes in hard ground with a 40mm (11/2 inch) auger with it, left it out in the rain etc. It will not die! I can sieve about half a cubic metre (2/3 cubic yard) of soil on one charge of a 1.5 Ah battery.
great sir but need more volume
Thanks Jason Gordon. It was the first one so will try to improve if I ever do another!
Ditch the pipe thingy for the drill. Use a cable tie.
I am not sure that is easier to manipulate
Shame about the volume/sound being so low
why not just use a electric drill?
Hello Otrotland. You can certainly use a corded electric drill if you are close enough to mains power. The advantage of the cordless drill is that you don’t have to be near mains power and you don’t have dangerous leads lying around acting as trip hazards etc. Good luck with your projects.
Thats so cool, shame your poor wife. keep the drill working
very POOR AUDIO, but a great video nonetheless. :)
Arme Bohrmaschine🙈🙉🙈🥵
Danke Cansein
Get a motor bruv
I can see a use for some sorting, but NEVER for putting your existing garden soil through... you’re absolutely destroying/killing whatever fungal growth and microbial life you may have grown over the season. This is a No-Till gardeners worst nightmare. Please watch Kiss the Ground on Netflix.
You are right Garth that fungal hyphae will be broken up but fungal spores and microbes are microscopic and very tough and if you look after your soils they should regrow pretty quickly. Thank you for the Kiss the Ground recommendation - wonderful.
@@lauristonmuirhead1210 you might also enjoy many RUclips talks by Dr. Elaine Ingham, founder of the Soil Food Web School, Dr. Christine Jones, soil microbiologist, and farmer Gabe Brown, successful Regenerative Ag practitioner.
OMG. WORST NIGHTMARE! First of all, why would you put your existing garden soil through this? Its for sifting compost.