Motorcycle lift table homemade_video #2
HTML-код
- Опубликовано: 16 мар 2015
- Ponte solleva moto autocostruito, sistema a pantografo con azionamento a martinetto idraulico da 2 tonnellate.
misure : lunghezza 220 cm. / larghezza 69 cm. / altezza da terra min. 15 cm. max. 75 cm. / rampa per la salita 60 x 30 cm.
39725 
Авто/Мото
![Jordan Adetunji - KEHLANI REMIX (feat. Kehlani) [Official Video]](http://i.ytimg.com/vi/EeJ8n5PxFGE/mqdefault.jpg)
Fantastico è il miglior sollevatore autocostruito fra quelli che ho avuto modo di vedere in rete. Complimenti al realizzatore.
ciao Giuseppe, grazie per i complimenti :))
This is very impressive. I've been looking at a lot of these, and this has better mechanisms for everything than any other I've seen. Well done.
Hi Brian, thanks :)
Great job. I like the stability, proper support and construction. Will surely follow your link for more details on how to make it..
Ho risolto ,nn riuscivo a papire il funzionamento del pistone idraulico, poi ho capito che è lo stesso funzionamento di un crik . grazie mille x la tua disinibita. 👍👍👍👍
bene allora :)
I'm considering building a lift table and I've looking at different designs. I am very impressed with this table and will make mine like this. Thank you Paso for sharing.
Hi Bruce, I'm very happy to have inspired you with my work :)
Same here👍
Top shelf! Thank you for sharing! Excellent work and planning!
Hi Horatio, thanks :)
Top Shelf!!! Really enjoyed the video and your craftsmanship -Well Done!!! From Nova Scotia, Canada!!!
Hi Horatio, thanks very much :)
¡Te ha quedado muy bien ese elevador para moto!. Enhorabuena.
thanks :)
Best video on RUclips for homemade lifts 😎
Hi boone, thanks :)
This is the nicest homemade lift that I've seen. Nice job.
best DIY lift I have seen. Thanks for sharing.
Hi Belinda, thanks :)
You're a really valuable web video; could not make it without ya!
Si señor, un artista!!!
Hi Jose, thanks :)
Great build. I am building an ATV lift and I'm using some of your design ideas. Thanks for sharing.
Hi Don Guptill thanks for your compliments, I'm happy to have stimulated your ideas with my project, best wishes for the build of your ATV lifter 👍
I love it.
Great job . . . kudos to the builder.
Hi Penny, thanks :)
complimenti ottima realizzazione
grazie Giovanni :)
Nice I would have liked to see the fabrication. I can figure it out though.
The part that empresses me the most is that it is not a sissor design.
Goog job ! Greatings from Poland :)
Hi Siwek, thanks :)
Complimenti!! Meglio che uno comprato in negozio.
grazie 1000 Simone :)
Give us a bit by bit explanation of how you built this on as I would really like to do the same thanks 🙏
ottimo lavoro, mostra nei dettagli del design. Mi piacerebbe sapere come riesci a scendere a bassa velocità a volte è necessario in base a ciò che hai sollevato grazie
safety catch is very clever
Nice safety system. Great build. I think I am going to have to build one of these!
thanks for the compliments, I'm happy to have inspired you :)
If possible always try support the man and order one. Shipping doesn't cost that much.
Nice! Got some plans for this master piece? I need to modify for a Trike.
Belíssimo trabalho parabéns 👏👏👏👏👏
thanks :)
Great achievement, well thought out. Thank's.
Hi oldyoung, thanks :)
Great job really
Love to have it 😊
Mick Cherki from Israel
Hi Mick, thanks very much :)
На мой взгляд самая удачная конструкция. Ни чего лишнего. Всё просто и продумано. Можно чертёж с размерами?
привет Иван спасибо, за размеры этого стола для подъема мотоцикла смотрите это другое видео :
ruclips.net/video/pkmQatiNWCA/видео.html
Parabéns, ficou excelente.
thanks :)
Hey Paso great job, do you sell the sell plans for this build?
Sir that sure is a fantastic job thanks for sharing. Do you have plans fort the build you share ?
Hi Jogo, thanks :)
look at this my other video that contains all the measures and details of construction of my motorcycle lift table, go to this link : ruclips.net/video/pkmQatiNWCA/видео.html
Very good job. Congratulations from France
Hi Jean-Alex, thanks very much :)
Perfeito!
Obrigado por compartilhar 👍
Nice Job ,Well Thought Out !!!
Hi greg, thanks :)
Could you make a blueprint pls. I want do it like you
if you made a blueprint please drop a link on description
LaAssio ElKickeo.....love it!
Perfect...good job...
Hi Hotman, thanks :)
👍 dobar si
Very nice lift
Congratulations. It looks very nice, thank you
Hi Jan, thanks :)
Nice design!
Incredible design. Not a single thing left out
thanks XJeep
I am Rehan .you are great
Hi Rehan, thanks :)
Nice lift mate👍 does the slide mecanism for the safetystops work with the weight of the motorcycle?
Hi Kenneth, yes, the safety mechanism is kept blocked by the weight of the motorcycle it self and by the weight of the lifting table.
El mejor que eh visto
thanks :)
Hola cuánto es el costo del plano lo quiero para Peru
great solution, btw what song/music is used in the video?
Hi whiskeythrottle, thanks, the music of video are the Win XP theme song.
That’s a great job
Is there a link to build it
Hi Jeremy thanks :)
Excellent bit of design and engineering ; )
I stand by my comment. It's an excellent bit of design and engineering. If you want to make one to suit yourself, then you can make it, "about 4 feet longer" and please post the vid for us to see ; )
@ Black Dog _ I don't understand what you mean, I no have problem getting my motorcycle up and down on this ramp ..
@ bachandefi _ thanks :) and I also approve your answer to Black Dog ;)
I like the way it just stacks against the wall when not in use too. Well done.
@ bachandefi _ thanks again :)
very well done
Hey ho, tolle Umsetzung. Ich habe es mir da etwas einfacher gemacht und einen hydraulischen Hubtisch aus einem Krankenwagen / RTW als Motorradbühne umgebaut. Gruß
How much is price lift table in bangladesh
Gute Arbeit, schönes Video, sehr lehrreich und schöne Musik, was ist das für ein Album?
Danke Andreas, die musik ist win xp theme 👋
Really nice job. This is must have for any garage. Would it be possible to share me a drawings, plans, detailed dimensions?
Hi Nenad thanks, I not have drawings or plans, but I have another video to all measurement to this motorcycle lift table here :
ruclips.net/video/pkmQatiNWCA/видео.html
and one image here :
farm3.staticflickr.com/2883/33737254836_31888ea534_o.jpg
And translation to english, love the tunes
Very well made 👍
Thank you Jeffrey 👍
Ottimo lavoro, ti volevo chiedere info sul martinetto che hai utilizzato. Vedo che è un martinetto a bottiglia con il pistoncino perpendicolare al martinetto stesso.
Dove lo si può reperire?
Grazie.
grazie Davide, il martinetto che ho utilizzato l'ho preso da un sollevatore a carrello da pavimento, per intenderci da uno simile a questo :
cdn.manomano.com/sollevatore-idraulico-da-pavimento-3-tonnellate-rosso-P-334568-2516133_1.jpg
Um bom trabalho !!!!
Thanks Luiz :)
Wha?
Nice job brother, how much in material?
How much did it cost to make?
What is the music? Thanks!
Muito bom parabens
Big thanks for this videos and nice design
+Amanoula Mathurah
thanks :)
so far nicest design I've seen.
thanks so much Patrick.. :)
WHIT THE LEVERAGE OF THE CYLINDER SET UP HOW MUCH CAN IT LIFT...MY GOLD WING IS 800 LBS DRY..
Hi, when I built this table in the testing phase I lifted four adult men, approximately 320 kg without any difficulty..
Kon sa cylendar hai sir
lut ! super !!
thanks :)
Nicely engineered...
Thanks Yves :)
I have watched your video many times but I still don't understand how does hydraulic mechanism works could you please put more detailed video or drawings of hydraulics, I know that it's. Floor jack but how does it help to rise and lower the lift
Please guide me _^_
Hi Workmen, see this my other video : ruclips.net/video/pkmQatiNWCA/видео.html Here you will find all the various measures and various details for the hydraulic mechanism..
The materials used are steel and mild steel for the upper plane.
Workmen V... Paso uses in mechanical terms a overdrivin first class lever. The hydraulic jack of course applies and significantly multiplies the effort.
www.teachengineering.org/lessons/view/cub_simp_machines_lesson03
Nice!!
thanks :)
Muito bom 👍 forte abraço de nós do CANAL FERREIRA MOTOS
Hi, thanks :)
thought of another use for this thing you could lift heavy logs and beams / the work on a mill table and get shit done a lot easier.
You need a wheel chuck and tie down loops for that.
Hi Andrew, already done :) watch my other video : ruclips.net/video/kPtiZholY7An/видео.htmld
and if you are interested, subscribe to my channel ;)
what would you say was the overall cost of the build ? I live in Chicago so if you don't mind estimated American dollar amount. I have a similar idea but it seems to me that I would spend almost $200.00 on just the hydraulic jack . For that price I can purchase a cheapie and upgrade it on my own. What are your thoughts?
Hi Lazzy, I don't have the total cost of the right, I used partials recycled material, but the iron has a low price so nothing too much if you have to buy, the hydraulic cylinder I have used a trolley floor car jack from 2 Ton and you find a low cost, look this: admin.abc.sm/upload/1115/catalogodinamico/prodotti/img_14298_1737301650520-cric-idraulico-a-carrello.jpg.
In Italy your price is € 35,00
Do you sell plans?
Good concept but some of those welds make me very nervous about putting my motorbike on it.
Hi Wacko, I have lift four adult man in the test phase for a total weight of 340 kg, but I think the structure can lift a lot more .. I'm not afraid when I lift my motorcycle on it, the welds are ok..
Sir aap ka koi number nahi hai ham ko bhi is traha ka istumate chiye kidhar mile ga
Hey ,
awesome build, I would like to copy your design if you don't mind:)
Do you have more fotos of the hydraulik zylinder and how it's attached to the frame ?
Hello ls2011schorsch, thanks, you certainly can copy my project, there is no registered patent, right now I do not have other images of the hydraulic cylinder, but if you look carefully the video you understand how it is connected to the frame.
Bye.
OK that's good :) Did you use one of these car jacks ? And the pedal for moving down is probably attached to the Screw for pressure release , right ?
formfonts.com
The hydraulic system is a trolley floor car jack which I disassembled the hydraulic cylinder and used in my structure.
See this : admin.abc.sm/upload/1115/catalogodinamico/prodotti/img_14298_1737301650520-cric-idraulico-a-carrello.jpg . Stop video at 6:00 and look.
And yes, the pedal to shift down are connected to the screw to release the pressure.
And did you make it in steel, iron or mild steel
Thats all mild steel bro...
Nice work but please don't move the camera like that while recording!
This ia a video of year 2015, I think that we can not change this now..
I am in Ancaster Ontario and I will pay you to make one of these for me. How much would you charge ?
Hi Rob, I'm sorry but I can't do it because I'm not a trader, but you can use my video to build a motorcycle lift table similar to mine.
👍👍👍
good job on thinking all of this through.
@ David McCormick, Hi, thanks :))
Thank you Mr. Kwan Admire
thanks Kwan :)
Vc fabrica? Sou de Guarulhos SP?
I'm sorry but I don't understand what you mean..
Sir want to purchase this
How the relief pressure is not displayed.
Hi Raficul, you can see the pressure release mechanism at 2:06 minute, it is shown with the hand then used with the foot as for normal working use
Veer ji price khatho mello gaa
Well thought out.
Hi Bob, thanks :)
What tune is this?
Superbe!
thanks Jean-Michel :)
Hey bro...what type of jack is bieng used in it??
Hi anshid, I dismantled the jack by this : images-na.ssl-images-amazon.com/images/I/81n62id%2BmLL._SL1500_.jpg
Paso wwoww!!dats great..thanx bro😊preparing to making that😍
happy to have been useful 🙂 , good work anshid 😉
If it's a motorcycle lift, where is the tire vice up front and how much does it lift. We can't even see if it works with weight on it. It also looked it might tip over when the m/c was up front.
Maybe this video can clarify your doubts .. :)
ruclips.net/video/kPtiZholY7A/видео.html
Looks like you use paddock stands, center stand, head stand, etc. with it to me. Plenty of room. What’s with the skepticism anyway? The man didn’t say he was selling it… just showing off what he built. If he built it for a motorcycle then it’s a motorcycle stand. Simple as that!
Also, see 5:22
There is a bike on it.
Спасибо!
Hi Йог, thanks :)
Nice work
Hi Rajesh, thanks :)
Iska .kimot .pile6 .7001516914
Kitne ki hai..
Kon sa haydolic hai
Very nice.. Good job
Lovely job guess wt my next project is lol
Hi Anthony, thanks :)
Price
Meus parabéns
How much for this ramp 👍👌👌