Buenas, te estoy super agradecido por tu video. Hace unos días he tenido la misma avería que describes en el faro de un panda, antes de llevarlo a reparar he mirado todo cuanto se me ha ocurrido y finalmente tu video ha caido en mis manos y he solucionado el problema. A día de hoy creo haberme ahorrado unos 300€. Gracias por compartir. Saludos
The Video helped me right away, I have a Fiat 169 (Panda), the exact same connector was melted so only 1 headlight was working. So, Thankyou very much.
Thank you for the feedback! If it fails again you may want to see the new video on this problem when I finnaly replace the connector with the recommended spare part. Here I left the link just in case you find this useful: ruclips.net/video/K-n2LPKvihQ/видео.html
Thanks for the tip. I have manage to solve problem for now. I had a bad contact on connector, the contact did not burn for now but this is obviously some type od factory mistake on this version od Panda. I have one od last version of this Panda (manufactured 11/2011) and I think that is very sad that manucturer did not solve this problem on later versions od this Panda.
Thank you for the vdos, they are very very helpful. Question though; how do you take the headlight assembly out to replace the whole unit. Currently my driver side headlight unit has moisture in it and I would like to replace it, plus it is getting cloudy and reducing the lighting. Thank you once again for your tutorial videos.
Hi Sec, Sorry, I do not have access to the Fiat Panda anymore since I have change my car. I have some friends that have the car, if they have this problem I can try to repair them and make the video but I don't know when. Thanks for your feedback and for giving me an idea for a video. If you live near Barcelona I can repair yours and make the video
tengo el mismo problema en el panda y un mecanico electricista me ha presupuestado 300 euros. Seria muy dificil comprar el kit de reparacion e instalarlo uno mismo? el kit es facil de encontrar por eso
Sí, venden el kit en todas las web de repuestos o ebay. Si eres un poco manitas y tienes un día para dedicarte al coche, no parece complicado. Si no lo hubiera solucionado con el método del video, habría comprado el kit y lo habría instalado yo mismo.
compre el kit y funciona, es facil de instalar, solo hay que comprar conectores y vainas ya que los 2 cables del kit son de aluminio y los cables a conectar son de cobre. Gracias.
Hi, you have repair only a dirty contact. The lamp fails again in a few monts. :-( Is better use a relais for decrease the current on the connector ;-)....
Thank Roberto for your comment. You are right. I did this to pass the car inspection. After that I did the repair with the spare part because it failed again. Here is the video: ruclips.net/video/K-n2LPKvihQ/видео.html
Maybe the connector is very damaged and you need to replace the connector but you can try first to change the fusibles. Take a look to the next video where I show you how to do this two things: ruclips.net/video/K-n2LPKvihQ/видео.html
Nice recomendation! Less intensity throw the wire and the it will not burn the connector again. I had to repaired three times already. I will try this. In Spain you will need to remember to put back the incandescent bulb when doing the ITV every year.
Buenas, te estoy super agradecido por tu video. Hace unos días he tenido la misma avería que describes en el faro de un panda, antes de llevarlo a reparar he mirado todo cuanto se me ha ocurrido y finalmente tu video ha caido en mis manos y he solucionado el problema. A día de hoy creo haberme ahorrado unos 300€. Gracias por compartir. Saludos
Me alegro que te sirviera!!👍
The Video helped me right away, I have a Fiat 169 (Panda), the exact same connector was melted so only 1 headlight was working. So, Thankyou very much.
Thank you for the feedback! If it fails again you may want to see the new video on this problem when I finnaly replace the connector with the recommended spare part. Here I left the link just in case you find this useful: ruclips.net/video/K-n2LPKvihQ/видео.html
Great Success!!!! Many thanks, Fiat wanted to charge us €1200 (no joke) and we fixed it thanks to your most excellent video
1200€?!? Wow... for a design failure... Thanks for your feedback!!👌👍
Thanks bro, its working for while, if it gone again, I will follow your next video to replace the plug. Cheers mate!
Thanks for your feedback!!💪
Your video helped me to repair my car, So Thank you very much!!!
Thanks for your feedback and for taking time to leave a comment!! ♥️💪🏼
Thanks for the tip. I have manage to solve problem for now. I had a bad contact on connector, the contact did not burn for now but this is obviously some type od factory mistake on this version od Panda. I have one od last version of this Panda (manufactured 11/2011) and I think that is very sad that manucturer did not solve this problem on later versions od this Panda.
Thanks for your feedback!
Thanks, this worked perfectly!!
thank you for the Video i will trie i hope its the same Problem
god bless you 😀👍👋
Check the second video as well. It is possible that you need to replace the fuse as well
Thank You very much friend.
You are welcome!!👌✌️
Thank you!! Your video was so usefull really thank you from Chile!!
Thanks for your feedback! Saludos Chile!
Hello, Thanks for your video. It worked perfectly ! Merci
Thanks for your feedback 💪❤
Thats Tage Second video from you that helped me.
Thanks Thom! I really appreciate your feedback!
Merveilleux, wonderful, fantàstico. It works!
Thank you very, very much...!
Thank Ricardo for your feedback! Happy to know it has been useful for you!
Thank you for the vdos, they are very very helpful. Question though; how do you take the headlight assembly out to replace the whole unit. Currently my driver side headlight unit has moisture in it and I would like to replace it, plus it is getting cloudy and reducing the lighting. Thank you once again for your tutorial videos.
Hi Sec, Sorry, I do not have access to the Fiat Panda anymore since I have change my car. I have some friends that have the car, if they have this problem I can try to repair them and make the video but I don't know when. Thanks for your feedback and for giving me an idea for a video. If you live near Barcelona I can repair yours and make the video
CrazySurvivalStories im based in Vienna unfortunately. Cheers
Perfect
Thanks for your feedback 🤙👍
Si tutti e due trte 💪
Gracias por el consejo 👍
Thanks👍
You are welcome!!👍🏻♥️
How did you manage to get out the connector, without destroying everything?
It is hard, take time. Patience and thin screwdriver...
@@GuyInAMountain thanks man.
Turned out my initial thought was right.
The damn thing was just baked together.
Me voy hacer fan tuyo
Pau Quiros así me gusta!!
brother help, one low beam work ( right), but one doesnt work(left). What will be problem
Bulb working, fuse work...
It started like this for me, one sido working and other don't, it is probably the connector melted.
@@GuyInAMountain thank you
You are welcome💪👍
tengo el mismo problema en el panda y un mecanico electricista me ha presupuestado 300 euros. Seria muy dificil comprar el kit de reparacion e instalarlo uno mismo? el kit es facil de encontrar por eso
Sí, venden el kit en todas las web de repuestos o ebay. Si eres un poco manitas y tienes un día para dedicarte al coche, no parece complicado. Si no lo hubiera solucionado con el método del video, habría comprado el kit y lo habría instalado yo mismo.
El kit cuesta unos 40 euros. Vale la pena intentarlo creo, sino, pediría más ofertas a otros mecánicos
compre el kit y funciona, es facil de instalar, solo hay que comprar conectores y vainas ya que los 2 cables del kit son de aluminio y los cables a conectar son de cobre. Gracias.
Alvaro Luna Gracias por el feedback! Me alegra saber que pudieras resolverlo tu mismo. Saludos!!
Hi, you have repair only a dirty contact. The lamp fails again in a few monts. :-( Is better use a relais for decrease the current on the connector ;-)....
Thank Roberto for your comment. You are right. I did this to pass the car inspection. After that I did the repair with the spare part because it failed again. Here is the video: ruclips.net/video/K-n2LPKvihQ/видео.html
@Roberto Ongago How did you install the relay before power reaches the connector? Or would installing the relay directly onto the headlight help?
My left light went out and they put in a rele from the right lamp.
I tried this and both of my lights now don't work
Maybe the connector is very damaged and you need to replace the connector but you can try first to change the fusibles. Take a look to the next video where I show you how to do this two things: ruclips.net/video/K-n2LPKvihQ/видео.html
Sostituire connettore e fari a led h4
Nice recomendation! Less intensity throw the wire and the it will not burn the connector again. I had to repaired three times already. I will try this. In Spain you will need to remember to put back the incandescent bulb when doing the ITV every year.