it takes a lot of skill to use a angle grinder how you demonstrated , steady hand/good eyes,,,, I would also grind the sharp edges where you pop rivet ,,,, a little,,, nice job ✅
Mr Lee excellent work Iam impressed a lot on seeing this video lots of applaud and appreciation for your skill, Iam a novice in metal fabrication work I want to experiment with this project, will you please list the names of the tools and purchase links for helping me to purchase them .
Nice idea. But please always use some eye protection particularly while drilling, grinding, riveting, and cutting. I observed that in some part of the video, you’re looking so closely on the part that you are drilling but no eye protection. Stay safe always so that you can continue sharing useful videos like this.
nice work with the grinder sir, i like to do that as well sadly i don't have steady hands and good eyesight like yours. I recommend your wear gloves and hard face shield though just for safety
Yung faceshield ok po yun..basta malinaw at malinis po yung shield, sa gloves,para sa akin lang po ah,prang mas komportable po akong hawakan ang grinder kapag kapag wala akong gloves, kc nararamdaman ko ito..natatantya ko ang andar nya.. Salamat po..
Nice job 👍🏻. Can this be done with link chain fence round metal tubes? I want to make a metal frame with round tube and I don’t want to solder/welder them.
Hi Sir, if you choose to do this for your projects, make sure that the finished product will be stable, because the rivets will loosen every time you move the project. Thank you.
Sana ipinakita rin halimbawa hinde na kumagat ang ngipin ng riveter nilalagyan lang ng gas o thinner para tumalab o kumagat yung ngipin ng riveter sa rivet. Ty
Hindi ko po sina-suggest ito sa mga nagagalaw o napapatungan na gamit Sir, baka po kasi sa katagalan, uuga yan sir kasi baka lumuwag po yung mga rivets, applicable po ito sa mga lamesa o mga stable naa gamit o hindi nagagalaw sir..salamat po.
ito ay base lamang po sa aking karanasan at madalas ko naman po ito ginagawa at napaka effective po para sa akin, Kaya po ng angle grinder sir na may grinding disc, kung nakabaon naman po at gustong tanggalin, pwede po barenahin yung mismong rivet sir.. Salamat po.
Sir pwede po bang malaman ang sukat steel frame at size ng revit, at size ng tip ng grill. balak ko po mag DIY ng dog cage for my furbabies. salamat po sana mapansin.
@@MrLeeTV boss ilan po kayao 2x3 tubular magagamit sa growing pen na my sukat na 30sqm...planning to build po ako using tubular pero joint method po sana no weld...pwede po kaya? Salamat boss
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
it takes a lot of skill to use a angle grinder how you demonstrated , steady hand/good eyes,,,, I would also grind the sharp edges where you pop rivet ,,,, a little,,, nice job ✅
Thanks Sir Wally, I appreciate it..
😊
U buat keja memang cantik dan kemas. Well done
Excellent inspiration, Mister Lee. And you have a great taste in music!
Nagka idea tuloy ako master but hindi lamesa kundi canopy project ko nice one keep it up nakakatulong ito sa mga newbie na tulad ko
Salamat idol! Tamang tama gagayahin ko yan sa pagpalit ng lamesa nmin medyo my tama ng bukbuk🙏
Kayang kayang mo yan sir.
Salamat po sa panonood.
Ingat.
Super, es exactamente lo que estaba buscando para implementar en un proyecto que tengo. Gracias!!
Gusto ko subukan ang ganitong no welding system labo ng mata eh. Pde rin pala sa mga steel akala ko sa aluminum lang. Thanks for sharing.
Good job bro...nice,clean,perfect...accurate cuts too 👍👍👍
Thank you Sir!
Working without welding i like. 👍
But there's alot of work to compensate for it though. Thanks for the tip.
Watching from jeddah kuha aq idea para pag nag forgood n s pinas may panilmula
Mr Lee excellent work Iam impressed a lot on seeing this video lots of applaud and appreciation for your skill, Iam a novice in metal fabrication work I want to experiment with this project, will you please list the names of the tools and purchase links for helping me to purchase them .
Thank You Mr.Lee,sa bagong dagdag kaalaman
salamat din po sir.
New subscriber here. THE BEST TUTORIAL! ✔️👍
nice idea...iwas sa bayarin ng kuryente without using welding machine.
Ang galing naman. Salamat sa ideas Boss.
Salamat sir at nakatulong po sa inyo ang video na ito.
Nice idea. But please always use some eye protection particularly while drilling, grinding, riveting, and cutting. I observed that in some part of the video, you’re looking so closely on the part that you are drilling but no eye protection. Stay safe always so that you can continue sharing useful videos like this.
Thank you for your comment and observations sir.
Totoo yan. Yung kinakapatid ko si kuya Renan nag discoloration na yung isang mata nya kasi natalsikan
Oh 😭 Volunteer for the Department of Safety eh?
Thanks dag2 knowledge 4 me😊as beginners
salamat din po sir.
Nice, galing! Gagayahin ko yan pag may ganyan din akong project👍
Salamat sir Don.. ok din sya sir..matibay din po..
Iba ka talaga Mr. Lee apakagaling!🔥👏
Salamat Bro..
Ok yan bro galing ng work mo
Salamat sir..
very nice, good thing it didn't need a welding machine now, another project to be tried soon🔜
kudos laoban👍🏻👍🏻👍🏻
goodjob 👍🏻👍🏻👍🏻👍🏻👏👏👏👏
Xie xie laopan..
nice work with the grinder sir, i like to do that as well sadly i don't have steady hands and good eyesight like yours. I recommend your wear gloves and hard
face shield though just for safety
Yung faceshield ok po yun..basta malinaw at malinis po yung shield, sa gloves,para sa akin lang po ah,prang mas komportable po akong hawakan ang grinder kapag kapag wala akong gloves, kc nararamdaman ko ito..natatantya ko ang andar nya..
Salamat po..
Ang galing ng idea…thanks
Salamat po sir..
nice demo Bro. more pa bro.
Yun naman pala pwde! Bangis🔥
Salamat paps💪💪💪🔥🔥🔥
Super neat and detail un cutting
Ang galing
Salamat po Maam.
Bom trabalho, és um bom artista,sigo de PORTUGAL.
Ang lupet lakay.. 💪😎
Yun oh..Bos13k
Salamat Lakay💪
Nice job and idea and no need to use welding machine
Nice Lods, husay! 👍
Salamat Lods..
Nice Work brother .......you sounds Phillipines.......my neighbour.......I AM FROM MEGHALAYA
Hi Sir, welcome to my channel,
Yes sir, I'm from the Philippines,
Thank you for the comment.
Take care..
Super idea 💡❤
Love the idea ❤❤❤😊😊😊
Level up! Galing!
Ang lupet mo idol parang madali lng sau ginagawa mo
Salamat po Sir.
Sakto lang po.
Practice lang sir😁
Sana po, meron sukat bawat isa sa mga cuttings na ginagawa mo. para magkaroon ng idea yung mga bagong gagawa ng ganyan, tulad ko, salamat.
Ang galing idol
salamat po sir..
Gud idea salute u sir
Salamat po sir..
Brilliant idea!...👍👍👍🙂
Best work and nice video👍
Thanks..
Galing din!
Parey supper idia am from kerala india
Awesome. I need to make a cage for a pizza oven. I’m afraid I would screw up every other cut
Thanks, good job
Nice work
inspiring DIY! motivates me to complete my tools!
Thank you sir, collect more tools, specially the one that you need the most.
Very good 👍👍👍
Gusto ko sana bumili ng grinder pang kinis ng plywood. Or wood. Taz drill kaya lang mahina ang pulso ko. Haist. Ang galing mo Bro.
Naku po, medyo delikado po ang grinder Maam. Ingat po kayo..
Salamat po Maam.
Galing mo idol❤
Salamat po.
New subs! Bro! Thanks sa share!
Thank you Sir.
very simple job
Pwed kaya toh sa car garage parking na pang bubong or trusses ng bubong ?
Nice information .
Great work 100/100
Thanks!!
Good God 🙏🙏🙏 Bless...
Thanks a lot brother
Napadaan lang Master.😄
Welcome po sa aking munting channel Master..Salamat..
Sir sa ibabaw po mkikita po b yung pinagkatingan
Idol pwede kaya ganyang diskarte sa bed frame
Puede bs gumawa ng water rack dyn sa metal furring kaya kaya nya bigat?
Parang malambot ata kapag metal furring sir, mabigat po ilalagay nyo, try nyo po square tubular mas ok po.
Salamat.
Best ideas
Thank you so much
Thank you!
Gusto gumawa ng husband ko Nyan kulang lang kami sa tools parang kayang kaya din namin Gawin,
Ayus👍
Good job
Thank you!!
Mr lee pano gumawa ng bed na gawa sa metal stud thank you
Ay sorry po, hindi po kami nagawa non sir. Salamat po
boss anong size nang tubular square gamit mo?
1inch X 1 inch boss..
Good job po
What kind of rivets are those at 7:10?
How strong are they?
Wow nice video Amazing.
new subscriber🤘
Thank you sir..welcome po sa munting channel ko..
Nice and good job bro!💪😍👍
Salamat Bro..
Kaya ba nya supportahan ang 15 gallons na aquarium sir? Salamat.
Galing
Good job...ano po tawag sa ruler na gamit mo at san yan nabibili? Salamat po sa pag reply..
\gawa ka tubular gate sir na walang welding
Nice job 👍🏻. Can this be done with link chain fence round metal tubes? I want to make a metal frame with round tube and I don’t want to solder/welder them.
sir ano po ang brand ng f clamp nyo na kulay blue?
Vulcan boss..sa wilcon marami nyan..
Pwede bang gawin yan sa angle bar? At alam mo kaya kung pano pwede ikabit ang metal matting sa agle bar nang hindi winiweld?
Sir, ano size Ng gamit mona clamp. Tnx. Gbu
12 inches po sir..
@@MrLeeTV tnx
Ayos aydul.ano thickness nun bakal n gamit mo?
1x1 na Tubular bro, 2mm ang thickness..salamat.
@@MrLeeTV salamat aydul..
NICE
Do you think it is resistant to make a luggage rack for the car?
Hi Sir, if you choose to do this for your projects, make sure that the finished product will be stable, because the rivets will loosen every time you move the project.
Thank you.
nasa magkano yung ganyang bakal sir? wala kasi sumasagot na hardware sa fb. nice content lods
Awesome.e
Thank you! Cheers!
Sana ipinakita rin halimbawa hinde na kumagat ang ngipin ng riveter nilalagyan lang ng gas o thinner para tumalab o kumagat yung ngipin ng riveter sa rivet. Ty
Sir ano po tawag dun sa parang pako saka dun sa pangtulak nun?
Rivet at Riveter po sir..
pwd kaya yan e apply sa higaan idol.. d kasi ako marunong mag welding
Hindi ko po sina-suggest ito sa mga nagagalaw o napapatungan na gamit Sir, baka po kasi sa katagalan, uuga yan sir kasi baka lumuwag po yung mga rivets, applicable po ito sa mga lamesa o mga stable naa gamit o hindi nagagalaw sir..salamat po.
gracias PO
Hi sir. Applicable bato sa food cart?
Sir pag nagkamli ng kabit ng blind rivet ano po pwede gamitin pantangal ng mga ganyan sir?
ito ay base lamang po sa aking karanasan at madalas ko naman po ito ginagawa at napaka effective po para sa akin,
Kaya po ng angle grinder sir na may grinding disc, kung nakabaon naman po at gustong tanggalin, pwede po barenahin yung mismong rivet sir..
Salamat po.
verysimpull wrk
Hi sir with that setup po can it hold tools po?
Hi Sir,
Kaya po sir..basta naka fix po,at hindi nagagalaw o nililipat-lipat.
Salamat po.
Sir pwede po bang malaman ang sukat steel frame at size ng revit, at size ng tip ng grill. balak ko po mag DIY ng dog cage for my furbabies. salamat po sana mapansin.
Hi Sir,
Ito po mga sukat, 1inch X 1 inch square tubular
5/32x3/4 rivets, drill bit 5/32 din po.
Good luck po sa build sir, enjoy.
Salamat po.
Mahusay! Pwede b screw gamitin s halip n rivets? At what size ang posibleng magamit? Slmat aydol!
Tama idol,pwede rin ang screw,yung mga self drilling screw,pero dapat hindi tatagos sa tubular, salamat idol..
Thats cool but safety first
Thank you.
New subs po
Hi Sir Dolan,
Welcome po sa aking Channel..
Enjoy po.
Salamat.
safe po ba gamitin ang angle grinder stand attachment pangputol ng mga tubular na 1.5mm
Hindi ko pa po nasusubukang gawin yun sir..sorry po.
@@MrLeeTV last question sir. safe ba gamitin ang angle grinder pamputol ng kahoy? papalitan lang yung bala pang kahoy na disc
@@jefflorenzo4180 naku po..wag po sir..please..wag nyo pong subukan..hindi ko pa po nasusubukan, pero marami nakong napanood na hindi maganda..
pero kung lamesa o bangko pwede pero sa trusses mahina rivet
❤❤❤❤
Boss pwede ba yan sa 2x3 tubular?
Pwede Boss, tapos gamit kayo ng mas malaking rivet boss.
Salamat..
@@MrLeeTV boss ilan po kayao 2x3 tubular magagamit sa growing pen na my sukat na 30sqm...planning to build po ako using tubular pero joint method po sana no weld...pwede po kaya? Salamat boss