Memorising / clearing remote controls. Somfy Keygo 4 RTS Rollixo. Remote-receiver memorisation
HTML-код
- Опубликовано: 5 фев 2025
- A straighforward way to add/store/memorise/clear remote controls in the Somfy Keygo 4 RTS Rollixo garage shutter door system. Method 1: Remote-receiver memorisation.
Prosty sposób dodawania/zachowywania/zapamietywania/usuwania pilotów zdalnego sterowania w systemach drzwi/bram garazowych marki Somfy Keygo 4 RTS Rollixo. Metoda 1: Programowanie pilota zdalnego sterowania na odbiorniku.
Method 2: Remote-cloning/copying memorisation.
Metoda 2: Klonowanie/kopiowanie pilota zdalnego sterowania.
• Memorising / clearing ...
Thank you, this was far clearer than the official instructions!
Perfect clear instructions
Worked correctly
Now KEYGO fob works on both doors (double garage) Thanks so much.
Fantastic! Great help. I have this tutorial saved in my favourites now in case i need to find it in the future
This was a great guide and helped me with my garage remote, got the same model. Thanks!
Excellent vlog I’ve just ordered one of these from Amazon 😃👍
You’re an absolute legend. Thank you 🙏
Amazing video so helpful. I bought some compatible remotes but instructions didn't have my receiver.
Thank you, that helped brilliantly.
That is super helpful, many thanks
THANK YOU!
Thank you buddy great video!
hellobhave you a notice for change condensator?
Can I also add my thanks to you, saved me £50 on a callout charge to the garage door installers
Hi Piotr - i have recently moved into a new home that has this unit. It worked fine for a while but all of a sudden it stopped working. I have had an electrician look at the wiring and there is power going to the unit. I have changed the battery on the Keygo fob however there are no lights showing on the unit/ Any help is greatly appreciated. Thanks in advance
Steve
Thank you so much 🙏
Thanks. Worked great👍👍👍
Hi there, I have lost my garage door remote & i’m worried someone will find it and break in to my garage. Is there any way to clear the memory of the receiver so if you lose a remote to stop the lost remote from working? Thanks in advance
The only way without opening up the receiver would be like this: 1. You press and hold the button 'Prog' on the receiver, for about 7 seconds, until the indicator light above the button goes out; 2. Now, you release the button, and the indicator light flashes slowly. This is to indicate that ALL memorised remote controls have been cleared.
i have tiis same garage door, it is randomly stopping when closing does anyone know why?
Your door is curved at the bottom, meaning the photo cells in the rubber tube lose contact once the door trebles while shutting down.
What about when programming - you press the remote button with the prog light on the receiver illuminated and it doesn't flash, just stays on? Tried a new battery. Do I need a new remote control? All the LED's work as expected, it just won't work.
If it's a KeyGo 4 RTS remote we're still talking about (that is, the same models featured in this video) then you should try the other three small buttons - might be the big one on your remote that is dead.
Hi Peter - tried that but it must have been a chip failure. Ordered and received a new remote and it programmed and worked exactly as per the video. I suppose one every five years is not too bad.
hi my door will go up all the way with one click but when i try to close it i have to close it by holding on on the button but before it was just one click how do i fix this
Same here. You ever work this out?
@@matthewgummdid you ever work it out? Same issue for me
@@brettpashley no, we've moved house now - so it's someone else's problem 😬 we did tell them before selling 😅
I have the same problem
Hi I wonder if you could help, I have the same configuration of door and receiver. My door works fully when I press the up/open button, but close’s intermittently every couple of seconds.
I’ve changed the battery in the door sensor, but still the same.
Any help would be appreciated.
Thank you.
I'm afraid it's the door that is at fault; I could bet yours is buckled inwards at the bottom, where the rubber sits, through which the photo cells send a signal to see each other and stop the door closing when the signal is disrupted. A DIY solution can be seen in this very video, with a string across the bottom of the door with a wooden block pushing the door outwards, as if trying to streighten up the door.
Thank you...fixed !
Is this instruction available in English
Hi Piotr my garage door won’t move up or down anymore and number one is just flashing on the control panel. Anything you can suggest please ?
Looks like you got yourself into motor or fall protection mode somehow. Is it flashing slowly or rapidly? If slowly, then the system is waiting for motor adjustment; otherwise, I'm afraid, it's got something to do with the motor itself.
Hi Piotr I’ve spent many hours looking for someone who can sort this local to me. I’m based in Bedfordshire do you have anyone that may be able to help?
@@SS37146 I don't personally know of anyone who could help. Could you just confirm whether the light is lit permanently, or flashing slowly or rapidly. It could be that the fuse is blown.
My somfy garage door won't move up or down after 3 sec out and 8 sec in and 3 sec out ..
The issue is that my remote key fob opens garage door but won't close it. Keeps stopping on way down. To close fully I need to press and hold down button on control panel to fully close . Advice please
I'm afraid it's the door that is at fault; I could bet yours is buckled inwards at the bottom, where the rubber sits, through which the photo cells send a signal to see each other and stop the door closing when the signal is disrupted. A DIY solution can be seen in this very video, with a string across the bottom of the door with a wooden block pushing the door outwards, as if trying to straighten up the door.
@Piotr Peter I can't quite see how you are fixing the string line. Is it possible to do a video showing the string attachments clearly please 🙏
I might, actually. But first things first. Could you possibly draw a line on the floor with a bit of chalk or anything that you could erase later on, with the shutter door right shut, alongside the bottom of the door, when the rubber sits. Then open the door fully and have a look at the line - is it straight, or is it curved inwards or outwards the garage door? Anything about the line that is not straight up is wrong.
@@piotrpeter I did a video .. can I send it to you via WhatsApp pls
@@davidison7124 can you do that via wetransfer site pls
Can you clear all saved remotes and add new ones? To save any previous remotes holders from having access?
Clearing all remote controls
Press and hold the Prog button on the receiver (for approximately 7 seconds) until the indicator light above it goes out.
Release the Prog button on the receiver when the indicator light goes out; the indicator light flashes slowly.
All memorised remote controls will now be cleared.
@@piotrpeter that’s great! Thankyou very much for your help 👍🏼🙏🏼