Wow thats a really long hose run !!! ....what is the water lift / CFM/ at the wand( Realistically) are you using heat ? .... i mean the video shows the long hose run but doesn't show you working with it ?
Have you had the pipe that sucks up the water extend as I can’t see that reaching the bottom of your water tank well mine would not lovely set up by the way mate
Yes, this setup had about 18" added to the pickup solution hose to reach the bottom of the tank; that short an extension shouldn't cause any cavitation. On my new setup I've a tap outlet at the bottom of the tank that the hose is attached to with a gate valve.Thanks for the compliment!
Hi. Great set up. I’m looking at purchasing one of these. What’s the longest hose you’ve used on this? I want 225ft. Also Where did you get the reel from?
Steven Pallosi I've used 225' but I'd say that was the maximum and the vacuum lift was quite low by then. Also 2" hose should be used right to the wand- 1.5" would kill it! The reel is Prochem's truckmount one and just about holds 250' of 2" vacuum pipe. I've used the remote and auto empty from seven flights of stairs up, which as you can imagine is a real benefit for the cost of it!
DHR604307 ok might just stick too 200’ max length then. And definitely go for the 2” hose rather than the 1.5”. I’ve got a few prochem machines but like the idea of leaving the machine in the van. Hopefully will save a lot of time
Tom Gadsden The water tank is 350ltr by Wydale Plastics, UK. Different capacities/sizes are available. The waste tank is 50ltr on the machine itself, but auto empties every time it is switched off(by remote)
sam3d No need for a booster with the type of jobs I do! I've just needed to alter my wand technique slightly on very long hose runs, ie extra drying strokes.
Wow thats a really long hose run !!! ....what is the water lift / CFM/ at the wand( Realistically) are you using heat ? .... i mean the video shows the long hose run but doesn't show you working with it ?
Need to protect them skirts!
Can you make a video of how the chemical machine is fed?
how many inches is the vacuum hose
Do you have a Facebook page for ur business or anything? Would u say the storm is best machine u have used?
Hi , I’ve been told u use to have a truck mount and went to this ? How would u rate this compare to a truck mount?
Thanks for your time
I got a feeling that Woman's ears were bleeding after she got done with her little Jesus Gardening.
Ok thanks
Have you had the pipe that sucks up the water extend as I can’t see that reaching the bottom of your water tank well mine would not lovely set up by the way mate
Yes, this setup had about 18" added to the pickup solution hose to reach the bottom of the tank; that short an extension shouldn't cause any cavitation. On my new setup I've a tap outlet at the bottom of the tank that the hose is attached to with a gate valve.Thanks for the compliment!
HEy Dave nice vieo . Thank you ... Dave whats does the machne take in Amps at the socket ?
3 cables 13amps each
Hi. Great set up. I’m looking at purchasing one of these. What’s the longest hose you’ve used on this? I want 225ft. Also Where did you get the reel from?
Steven Pallosi I've used 225' but I'd say that was the maximum and the vacuum lift was quite low by then. Also 2" hose should be used right to the wand- 1.5" would kill it! The reel is Prochem's truckmount one and just about holds 250' of 2" vacuum pipe.
I've used the remote and auto empty from seven flights of stairs up, which as you can imagine is a real benefit for the cost of it!
DHR604307 ok might just stick too 200’ max length then. And definitely go for the 2” hose rather than the 1.5”. I’ve got a few prochem machines but like the idea of leaving the machine in the van. Hopefully will save a lot of time
And what voltage do you use the generator?
No generator; runs from mains(240V) within property.
What van you got that in ? 👌
Not in that one anymore! See other video: I've got it in a Mercedes Sprinter MWB now.
Do they sell these in the US ????
todd martinez I don't believe so. You could contact Cleansmart in Nottingham, UK to see if they can supply to US.
What make are your water tanks and what capacity? Many thanks
Tom Gadsden The water tank is 350ltr by Wydale Plastics, UK. Different capacities/sizes are available. The waste tank is 50ltr on the machine itself, but auto empties every time it is switched off(by remote)
Dave Rothery many thanks
@@01sovereign hi Dave daft question. Where does it auto empty too? Do you have to have a waste tank set up as well?
No booster?
sam3d No need for a booster with the type of jobs I do! I've just needed to alter my wand technique slightly on very long hose runs, ie extra drying strokes.
Facebook? Todd Martinez
todd martinez