Had my Ninja SX in with BHP today. I must say, these guys really know their stuff and as they assured me, I noticed the difference immediately. Friendly lads, good conversation, and coffee, and pleasure to meet them. Cheers guys!
Is the bike not just running lean as it’s got the decat fitted? Surely the stock exhaust system would be a bit richer? Not knocking the video, definitely nice results and you guys know what you’re doing, just think it might help to clarify that it’s unlikely they’ll run that lean in stock form.
You’re absolutely right, the decat will make the bike run a bit leaner. However all Euro 5 bikes run really lean even in stock form. Check out some of our other videos on Euro 5 bikes, they all run lean.
Please help me with my bike, it’s the same as this video. 2021 ninja 1000sx. I need a fuel tuner or ecu map. I need what you did to your bike done to mine. Where can I get a fuel tuner/ecu mapped for the 2021 ninja 1000sx.
Hi BMP UK. I have a 2020 ninja 1000sx, I've noticed I'm getting "pinking " under hard acceleration at low/medium rpm. I've read it could be because of the e10 fuel octane but I get "pinking" regardless if I use E5 or E10 fuel. Could a remap cure this? Many thanks Dave
Hi, I have the same bike, can you increase the rpm after 11000? Because I want to see more than 260 km at top speed but I cant because the redline is at 11000rpm. Does your map only effect the accelaration or both the rpm and top speed too?
Had my Ninja SX in with BHP today. I must say, these guys really know their stuff and as they assured me, I noticed the difference immediately. Friendly lads, good conversation, and coffee, and pleasure to meet them. Cheers guys!
Thanks for the kind words. It was a pleasure to meet you and tune your bike.
@@BHPUK Seriously, it's like I've gained another gear and runs and responds really smooth. Cheers Cal.
Planning on buying mine next year so I’ll be straight down afterwards!
Enjoyed this video thanks. I hope you get a chance to look at the z900 at some stage. Test riding one tomorrow. Keep well 🤘
Is the bike not just running lean as it’s got the decat fitted? Surely the stock exhaust system would be a bit richer?
Not knocking the video, definitely nice results and you guys know what you’re doing, just think it might help to clarify that it’s unlikely they’ll run that lean in stock form.
You’re absolutely right, the decat will make the bike run a bit leaner. However all Euro 5 bikes run really lean even in stock form. Check out some of our other videos on Euro 5 bikes, they all run lean.
hello, has the circuit breaker been removed for the 2021 model, what was the final speed?
what about versys 1000 do you have any modification on it, any numbers graphs ?
Please help me with my bike, it’s the same as this video. 2021 ninja 1000sx. I need a fuel tuner or ecu map. I need what you did to your bike done to mine. Where can I get a fuel tuner/ecu mapped for the 2021 ninja 1000sx.
Please email us on info@bhp-uk.net or call us on 01282 779000 or +441282 779000 if you’re outside the U.K.
we will be happy to help
Hi BMP UK. I have a 2020 ninja 1000sx, I've noticed I'm getting "pinking " under hard acceleration at low/medium rpm. I've read it could be because of the e10 fuel octane but I get "pinking" regardless if I use E5 or E10 fuel. Could a remap cure this? Many thanks Dave
Hi Dave, it’s because the fueling is so lean up-to about 7000 RPM. We can fix this with a remap.
hola soy de uruguay sirve para kawasaki zx1000gbf 2011 (sx1000)
What do you see the bike doing with a sprint filter and race header possibly some mr12 curious on thoughts
Not sure, only the dyno can tell. We tried an aftermarket filter on this bike, I'm not going to disclose the make but it actually lost 2bhp.
Do you program individuals ecu
Hi, I have the same bike, can you increase the rpm after 11000? Because I want to see more than 260 km at top speed but I cant because the redline is at 11000rpm. Does your map only effect the accelaration or both the rpm and top speed too?
Hi, yes it is possible to increase the RPM limiter.
@@BHPUK Thanks a lot 👍
Was this particular bike set up with Akra headers?
Not the headers, just a link pipe with Akrapovic end can.
Top speed after flash
What kind of gains I can expect on this bike fitted just with aftermarket end can
It really depends on the can you use.
Hi I have a 2022 sx1000 if I want it turned can you do it and how much
Just give the guys a call on 01282 779000 they'll be happy to help.
Where do I find a tuner for my 2021 ninja 1000sx
You just found us. Feel free to call us on 01282 779000
Are you able to reflash 2020-2022 US spec ECU's?
Hi, Yes we can flash the US spec ECUs
Makes the same power as my 2014 z1000 that has 97000kms on it 🤣🤣🤣
Ok thanks for sharing bro. Z1000 was a good bike.
Z1000 makes about 125 at the wheel. 😂 it's an olddddddd bike bro