Поражает смелость таких гениев, прислать оцинкованные болты к оценкованной гайке и потом начать скругять все это на токарнике, заклеить все это скотчем который сплавится при нагреве (а он будет от 12в)когда можно взять термоусадку, и прислать все это на секундный клей который при нагреве выделяет цианакрилатный газ (кстати ядовитый) так что сдохнуть можно ещё на этапе пайки якоря (ведь контакты присраны этим клеем), в общем я в лёгком ах..., но работает крутяк)
Great work indeed. I love your vids. However, you'd better think of making some AC stepper motors and induction motors if you're looking for real strength and high torque. The vibration that is clearly audible tell something about the balance and durability of this motor. Good luck bro.
You can just fit it by it's shaft in a drill's chuck, and press it against some sandpaper, a file, or a grinding stone or sg like that while it's rotating.
Wow, i can use this with my homemade pressure washer and homemade battery pack for my burning laser line so it will be a good generator.. Thank you so much sir.
We would like to use this for our project, but we don`t know some of the materials that you guys used. This is a nice project, and we are hoping to still make this.
I love your videos, can you also make axial flux generators if possible, mini axial flux generators/motors are very efficient and can be used in many applications. thank you.
But the case of the two (of yours) may fall apart. First, it was necessary: fasten the case with screws. Secondly: there is no alignment (it is necessary to correct). Thirdly: magnets, they are poorly fixed (it seems to me).
quality is insane for a diy project. but obviously you need a better enclosure. try sheet metal in the worst case. They use die punch with thick steel sheets in small motors like 555/775/895/997 or cast Aluminium / Iron on bigger motors, the bigger the enclosure, the more vibrations it can absorb. You can manage vibrations by placing silicone/rubber/elastic material on the fixture. This is great to see a self made motor function so good, i live on an island and even the smallest item you buy online costs a lot to import while salary is low as hell. Looking for ways to recycle available materials here and build cheap but strong/accurate devices.
Nice job but this is less DIY and more How it's made. Step 1 buy welder step 2 learn how to weld step 3 buy lathe step 4 learn how to use lathe. I'm an Automotive Instructor and was hoping this would be a fun excersise for my students. Voltaic pile it is then.
My little advice for you. Instead of wrapping tape around the bolts, dip the soldered bolts in super glue 3 to 4 times and your work will be more mature. If my advice is wrong, please let me know.
@@marof.paynda.656 Con mi Esposa trabajamos en ingeniería Eléctrica y Electrónica y a mi me gusta hacer mis propios proyectos de automatización y robótica, por eso aprecio lo que haces y te felicito. ما با همسر در برق و الکترونیک به طعم و مزه در اتوماسیون خودشان و اتومبیل های روباتیک کار می کنیم ، اما این طور نیست.
as advanced as brushless motors are, there is a special place in my heart for the simplicity of brushed motors.
at 5:07, what are you gluing onto the shaft? and why?
Поражает смелость таких гениев, прислать оцинкованные болты к оценкованной гайке и потом начать скругять все это на токарнике, заклеить все это скотчем который сплавится при нагреве (а он будет от 12в)когда можно взять термоусадку, и прислать все это на секундный клей который при нагреве выделяет цианакрилатный газ (кстати ядовитый) так что сдохнуть можно ещё на этапе пайки якоря (ведь контакты присраны этим клеем), в общем я в лёгком ах..., но работает крутяк)
Сука, это такая ебанина ебаная что я удивлен как оно вообще работает
Сука ебаные катушки на якоре бляцком чего стоят
P.S. Азамат извиняюсь
Someday I'll make like this 😊
God bless you 🙏😇❣️
Why not make some day today? Never talk in the future only present 😊
From India Love it 😍😍😍
And Successfuly Made It 🤗🤗
What did you use it for?
Great work indeed. I love your vids. However, you'd better think of making some AC stepper motors and induction motors if you're looking for real strength and high torque. The vibration that is clearly audible tell something about the balance and durability of this motor. Good luck bro.
now you hold on fella. you're trying to tell me the motor made of bolts and plastics isn't level and vibrates?
@@chrishayes5755 yes, exactly.
king of making dc motors no one beat you,
nobdy makes this ttpess dccc
Hey i hv a name for you
DC king
❤❤🙏🙏😉😉😉
Practice is a future of talent
Nice work..it will really helpfull with an audio explanation about components and working..
Thank you
Preference.
Great job. Wish I had that lath or access to one
True lol
You can just fit it by it's shaft in a drill's chuck, and press it against some sandpaper, a file, or a grinding stone or sg like that while it's rotating.
Very good 👍
Mantaaaaap bro experimen nya❤
because everyone has a lathe machine in their house.
Super
Your a genius bro
Wow, i can use this with my homemade pressure washer and homemade battery pack for my burning laser line so it will be a good generator.. Thank you so much sir.
Waow 👍💐🎉 u r Genius
I realy helped by thos video.
And I too want like this video.
Thankyou so so so much
Superb bro good effoert and creative idea
We would like to use this for our project, but we don`t know some of the materials that you guys used. This is a nice project, and we are hoping to still make this.
Hello american tech from india
Wow! Very nice
Wow! looks like a scooter motor!
Awesome video 👌👏👍
#mr.prakash
Oh jeez that a lot of work
Wow you are pro
Super good
you are way too talented to be welding like that, keep practicing and keep making awesome videos
Superb job
This is such a beautiful design! Love it!
Great channel. Very informative content
I love your videos, can you also make axial flux generators if possible, mini axial flux generators/motors are very efficient and can be used in many applications. thank you.
Very good sir
Hay quá anh ơi
i like this video👍
Excelente !!!
?
Una pregunta, cuantas vueltas le da a las bobinas?
Cool! Diy vid with advanced machinery
Busy hands 🙌
Not bad, but this is nice. But......
But the case of the two (of yours) may fall apart. First, it was necessary: fasten the case with screws. Secondly: there is no alignment (it is necessary to correct). Thirdly: magnets, they are poorly fixed (it seems to me).
Nice work
Very nice
Amazing pro
Superb bhai
Love from INDIA🇮🇳
❣️❤️
Ima try to make one
Wow this is genius!
ruclips.net/video/mciwex2y8nE/видео.html
*metal casing or aluminum casing would make it perfect👌*
Very nice sir I will try it
good job
Sorry but those are “bolts” not “screws”! Just sayin! Gots to know your hardware!
@ChestLessMC 1 can
@ChestLessMC leave the poor man alone
Good job Ji 🌹
Well played
You make moter i like this
nice wallah
Your example is right
quality is insane for a diy project. but obviously you need a better enclosure. try sheet metal in the worst case. They use die punch with thick steel sheets in small motors like 555/775/895/997 or cast Aluminium / Iron on bigger motors, the bigger the enclosure, the more vibrations it can absorb. You can manage vibrations by placing silicone/rubber/elastic material on the fixture.
This is great to see a self made motor function so good, i live on an island and even the smallest item you buy online costs a lot to import while salary is low as hell. Looking for ways to recycle available materials here and build cheap but strong/accurate devices.
Amazing
Nice bro
Proof it its power ful
Wrapping it with copper wire howd you get so many loose wires in the end? Do they all have to connect or can you use different strips of wire?
I can’t believe what I’m seeing, is it really this simple? 🙈
Yeah it is
Nice video. .
Build some bldc motor for ebike 😁😁
On numara
now we need a DIY garage
Please try to attempt to show the torque and rpm as we would then better appreciate your hard work.
Great Bro 👍👌 please make Car police tool
Nice tark
Vary nice
Es muy bueno
Nice I want more video
Nice job but this is less DIY and more How it's made. Step 1 buy welder step 2 learn how to weld step 3 buy lathe step 4 learn how to use lathe. I'm an Automotive Instructor and was hoping this would be a fun excersise for my students. Voltaic pile it is then.
My little advice for you. Instead of wrapping tape around the bolts, dip the soldered bolts in super glue 3 to 4 times and your work will be more mature. If my advice is wrong, please let me know.
can i reverse this to make a hydro generator? im guessing yes but i just want to be sure......
Awesome work bro... 🌹🌹🌹🌹🌹💐💐💐💐💐
Well done my bro
Вот так, с появлением термоклея и клея "Супер-момент" и начали вылазить разные Илоны Маски ...
Jekus-solar ARX, согласен, с изолентой прогресс медленно шёл.
@@tadj104 но, уверенно. И он пришОл к победе социалистического труда!!¡!!
Ахахаз
Cool!
Bravo👏
Good idea
Did you measure the RPM ? The motor is clearly strong but I wonder how fast it spins.
Excelente trabalho 👍
Very impressive
Great video 👍
Good
these copper cables already have insulation in them, why cover the bolts with tape.
Can use this with a bike or pedal cart?
сУрьОзный подход😄😄😉
Ростет !))
Good job bro 👍👍🙂🙂
Nice😊
Think very goog.
Very good.
use Big Wire Is strong and make many RPM?
Fantástico!!
If I want to make the cover rotate instead of the shaft. How can you do that please
Pls mention NXT time what gage of wire will you lose and mention parts name too
Zordaar
Can u make a Continueumn Transfunctioner ?
Muy buen trabajo, parece que tiene buen torque.
حرف نداره حرفه تویی
@@marof.paynda.656 Con mi Esposa trabajamos en ingeniería Eléctrica y Electrónica y a mi me gusta hacer mis propios proyectos de automatización y robótica, por eso aprecio lo que haces y te felicito.
ما با همسر در برق و الکترونیک به طعم و مزه در اتوماسیون خودشان و اتومبیل های روباتیک کار می کنیم ، اما این طور نیست.
👌💐Superb , You take so effort to make this video , wow , I like it👍💐
Nice