@Tremblay Thomas it’s a m8 I believe I got m8 x 55 or m8x60 10 pcs M8 Hex Socket Cap Head Screws, 304 Stainless Steel Bolt and Nuts Set, 8 mm x 40/45/50/60/70 mm www.amazon.co.uk/dp/B07P8KB7CK/ref=cm_sw_r_cp_api_glt_fabc_0WKRH20NFYF8PW9M3A1P?_encoding=UTF8&psc=1
@@BINGO359 6mm is the thickness of the spacer sandwhich. 3 spacers (i.e. washers), ea. 2mm in thickness. However, the inner diameter hole size is 8mm for the M8 BOLT that is used. Using 6mm extra spacing, I measured an M8 bolt length for the top mount of 67mm in total (incl HEX bolt head) and 52mm for the lower mount, which assumes extra length for an additional nut at the lower mount. I will cut the 2x 52mm custom lengths from 67mm bolts (measured, incl head) that I have on hand.
I would like to know more about the alternative front-shock approach that you mention at the 17:20 point within the video?
I put a 20mm washer inside and it became harder, and a 12mm diameter rubber roller inside. Now it works faster and better.
Nice 1 & Your Instructions are spot on. Cheers
Issue I’m getting a couple of weeks time I will enjoy thanks for your project I’ll be watching
Do the new shocks feel softer? Does it ride smoother?
Yes
Nice vid :)) Do you have a link for this I ordered my m4 yesterday and might try this
Can you put where I can get that shockers over from PS
whats the thickness around the bolt opening?
i know the opening is 8mm but whats the thickness around it? it looks like 4-6 mm.
Ciao... Ma le nuove molle posteriori fanno rumore come quelle anteriori???
Link please ?
Hi I've got the same electric scooter what size Allan key do I need to take front tire off its quite big thanks lee
What shocks did you use on the front please? Cheers
How its going the speed mod? It worked? I want to do it to my M4, also the shunt, great video mate!
love the video , one question where did you get the m4 pro off-road tires from?
The off-road tyres come as Standard on the M4 Pro, but geekbuy or Ali sell them, £20+
Will the shocks fit on if l still want the seat on does anyone know please ? If so I'll order the shocks.
Yes the seat will fit with the new shocks no problem
Can you drop us a link for the bolts and suspension
You’re right about Ali baba they’re funny people good prices were not for me
Hi, i've found on aliexpress the same but 100mm (100-115) it's possible make it or is too small?
Link please of suspension
Boss san kayu dito sa italy pagawa nga din yung akin m4 din yong monopattino ko
What size spacer are these pls
He says 6mm spacer's needed
@@BINGO359 thanks g
@Tremblay Thomas it’s a m8 I believe I got m8 x 55 or m8x60 10 pcs M8 Hex Socket Cap Head Screws, 304 Stainless Steel Bolt and Nuts Set, 8 mm x 40/45/50/60/70 mm www.amazon.co.uk/dp/B07P8KB7CK/ref=cm_sw_r_cp_api_glt_fabc_0WKRH20NFYF8PW9M3A1P?_encoding=UTF8&psc=1
@@BINGO359 6mm is the thickness of the spacer sandwhich. 3 spacers (i.e. washers), ea. 2mm in thickness. However, the inner diameter hole size is 8mm for the M8 BOLT that is used. Using 6mm extra spacing, I measured an M8 bolt length for the top mount of 67mm in total (incl HEX bolt head) and 52mm for the lower mount, which assumes extra length for an additional nut at the lower mount. I will cut the 2x 52mm custom lengths from 67mm bolts (measured, incl head) that I have on hand.