As a person that has worked in the tool industry for close to 15 years and now run my own equipment business. The one thing I have to say is "Speed isn't always your friend" in this industry especially on the commercial side. The one thing I have a problem with is that tires should always be inflated in a safety cage, new or used! I know it is the one rule that is ignored more times than not and it shouldn't be! Look up a few tire explosion videos, when you have 100+PSI in a tire and it lets go (and it can happen) bad things happen when it does! My number one rule in business is that I just want everybody to go home at the end of the day! Have a good day and stay safe to all who read this!
So, you air it up in the safety cage to required pressure. Now you have to roll it to the unit and get right down beside it to wiggle it on the hub. Ever have one blow then? Put it on the unit with 10 psi, bolt it down then air it up with an extension line with a regulator from a distance. Just sayin'
It’s about time technology follows truck tire service, but doing this work for over 20+ years, I could of takin it off by the time that thing is out of the truck. Drivers appreciate the quick service after waiting hrs on the road waiting for there dispatch to get some one out to them.
***That is super cool please don't think I'm hating but when it comes to Big Truck safety you have to treat them better than your car meaning you never put a brand new tire on your dirty car rim same thing applies to a big truck or 18 wheeler or anything for that matter just take the time clean the bead of the room on the inside just so that the new tire seats against only the rim have a blessed day my friend very 😎!***
jak ktoś z kolami w dużym aucie nie miał do czynienia to zapewne nie wie ze oponę to 2 łyżki i po robocie a żeby założyć to klucz hiszpan lub jakiś zaciskowy
Good tool if the customer have all day to change his tire . Plus the hard part of changing an outside tire it's braking the inside bead more if it's a chinesse brand
This is cool and definitely easy on the body but it definitely takes too long i can change an outside tire in under three minutes including jacking it up
I about croaked watching that. I'd put 5Gs of my own money up and say I could do two tires manually faster than that little tool. I also would argue that you're physically touching the tire more than I ever have doing it with a "Go" bar. There is a video of an one armed man overseas that does tire job on a mounted wheel and tire chage and I believe he does it in under 2 minutes.
Ponieważ pojawiąją się komentarze odnośnie odbijania opony - informujemy, że jest to skrócona wersja filmu instruktażowego, którego pełna wersja znajduje się na profilu TORQ Mobile Tire Service.
Hi EuroGold, the 3 minuty z Tire Spyder is great tool. Kindly direct me on where to purchase one and to ship it to my country Kenya. i have a shop here and it would be very handy here. My email address is (waiganjoeric@gmail.com)
I just saw another video and that guy did it way faster and with no advance tools just muscle, knees and bars. Took 1 min and second by the time this set up his equipment.
Soooooo you want me to spend a tremendous amount of money on this thing so I can change tires slower than I currently can with a tire iron, a duck billed sledge hammer and a bucket of slick-em. This is only impressive to people who have never changed a tire on a tractor trailer.
Sic dobrý nápad,ale zajímalo by mě,jak by třeba sundal balon a nebo kolo které nesundával 100× aby měl 3min videjko,a vnitřní se nedělá asi vůbec,ale jinak ok
Zapraszamy na nasz kanał - jesteśmy jedynym licencjonowanym producentem urządzenia Tire Spyder i kompaktowych mobilnych serwisów opon TORQ. Eurogold jest jednym z udziałowców naszej spółki i pierwszym dystrybutorem systemu Tire Spyder w Polsce.
My tire guy would of almost finished the entire axle by the time you set this junk up get your little bars on and the safety pin hed be drinking a tecate and be ready for the next axle
I think it’s a good idea,I like that companies are coming out with new ideas and to be innovative, but unfortunately a good tire guy could complete the job in nearly half the time. Perhaps a different approach would work better for you guys
yeah right try it on a tire that's been on the rim for 100,000 miles rusted and stuck to the rim,thats reality,not a new rim and tire.good invention though.
Witam. Moje pytanie: co z kołem wewnętrznym na bliźniaku/napędzie? bo pomysł jest świetny jeśli chodzi o koła skrajne a wewnętrzne ? Wtedy żeby taka oponę ściągnąć trzeba by odkręcić zewnętrzną tak?
Najlepiej zdjąć zewnętrzne koło (dlatego w naszym mobilnym serwisie TORQ - zapraszam do obejrzenia innych naszych filmów - posiadamy klucz pneumatyczny 4300 nM) wewnętrzne przykręcić tymczasowo w jego miejsce, dokonać zmiany opony i założyć koła na ich pierwotne pozycje. Jest mozliwość wykonania procedury, gdy koło leży na ziemii, a le z naszego doświadczenia wynika, że opcja pierwsza jest wygodniejsza.
The Reviewer if you know what your doing and you're not a pussy you can do it all your life. I'm faster then that I've been doing it for over 15 years and I'll still beat any young kid and my back is fine. Oh plus I log on the weekends. Just can't be a pussy and make dumd comments.
As a person that has worked in the tool industry for close to 15 years and now run my own equipment business. The one thing I have to say is "Speed isn't always your friend" in this industry especially on the commercial side. The one thing I have a problem with is that tires should always be inflated in a safety cage, new or used! I know it is the one rule that is ignored more times than not and it shouldn't be! Look up a few tire explosion videos, when you have 100+PSI in a tire and it lets go (and it can happen) bad things happen when it does! My number one rule in business is that I just want everybody to go home at the end of the day! Have a good day and stay safe to all who read this!
So, you air it up in the safety cage to required pressure. Now you have to roll it to the unit and get right down beside it to wiggle it on the hub. Ever have one blow then? Put it on the unit with 10 psi, bolt it down then air it up with an extension line with a regulator from a distance. Just sayin'
It’s about time technology follows truck tire service, but doing this work for over 20+ years, I could of takin it off by the time that thing is out of the truck. Drivers appreciate the quick service after waiting hrs on the road waiting for there dispatch to get some one out to them.
Outsides are too easy but what about the inside tire??
***That is super cool please don't think I'm hating but when it comes to Big Truck safety you have to treat them better than your car meaning you never put a brand new tire on your dirty car rim same thing applies to a big truck or 18 wheeler or anything for that matter just take the time clean the bead of the room on the inside just so that the new tire seats against only the rim have a blessed day my friend very 😎!***
@JoeyTurnerDetails
So caring this around in a service truck is better 🙃
It’s not the lazy way it’s the smart way to do it .. he didn’t even break a sweat lol
I work less doing them with bars.
Круто. Видел как на комбайне два мужика пол дня с помощью ломов мантировок и кувалды меняли покрышку. Ну здесь круто.
fantastic very efficient way to repair tire. I'd very much love have one a d need a manufacturer's contact
As being a goodyears tire changer from the past I would say that this is very impressive invention. .....
Where to buy one like this
jak ktoś z kolami w dużym aucie nie miał do czynienia to zapewne nie wie ze oponę to 2 łyżki i po robocie a żeby założyć to klucz hiszpan lub jakiś zaciskowy
How did you break down the beads?
Could you tell us where we can buy this fantastic tools
In our company, please send me e-mail: biuro@eurogold.com.pl
Great video and even better machine
Dobre do zdejmowania opony ,gorzej jak musisz ustalić miejsce uszkodzenia opony 😁
Nice machine how do u break them stubborn beads thought
Way to much work two bar all day😍
What's the name of that tool u used and how much it cost
Good tool if the customer have all day to change his tire . Plus the hard part of changing an outside tire it's braking the inside bead more if it's a chinesse brand
Where can I find one of this?
Wow genial
This is cool and definitely easy on the body but it definitely takes too long i can change an outside tire in under three minutes including jacking it up
Don't even need to jack it up just drive inner onto wooden block and job done
Where can I buy this and can It deliver to Sri lanka?
And for the inners ?
I about croaked watching that. I'd put 5Gs of my own money up and say I could do two tires manually faster than that little tool. I also would argue that you're physically touching the tire more than I ever have doing it with a "Go" bar. There is a video of an one armed man overseas that does tire job on a mounted wheel and tire chage and I believe he does it in under 2 minutes.
What a great tool...... 👍
How much price tire spyder
A jak drugiego bliźniaka zmienić?
Now all you have to do is remove the wheel assembly to cage inflate and balance.then reinstall.
Até agora não vi nenhuma ferramenta , que
Tire o pneu de dentro nessa facilidade
Ponieważ pojawiąją się komentarze odnośnie odbijania opony - informujemy, że jest to skrócona wersja filmu instruktażowego, którego pełna wersja znajduje się na profilu TORQ Mobile Tire Service.
Hi EuroGold, the 3 minuty z Tire Spyder is great tool. Kindly direct me on where to purchase one and to ship it to my country Kenya. i have a shop here and it would be very handy here. My email address is (waiganjoeric@gmail.com)
Q llanta es preferible cambien en una pacha .la de adentro o la de afuera
No a co w przypadku gdy opona mocno siedzi na feldze? czym ja odcisnac?? bo jakos ogolnie tez przy tym robie i nie moge se wyobrazic
I just saw another video and that guy did it way faster and with no advance tools just muscle, knees and bars. Took 1 min and second by the time this set up his equipment.
Great job 👍👍👍👍👍
Excelente ferramenta!
spoko, a jak odbić opone na początku? tu juz jest odbita
How much tire spyder
Soooooo you want me to spend a tremendous amount of money on this thing so I can change tires slower than I currently can with a tire iron, a duck billed sledge hammer and a bucket of slick-em. This is only impressive to people who have never changed a tire on a tractor trailer.
I'm right there with you. I can have it off and on with air in about 7 mins. This would take 7 minutes to set up.
What the name of the tool..?..
I want to purchase this machine
Sic dobrý nápad,ale zajímalo by mě,jak by třeba sundal balon a nebo kolo které nesundával 100× aby měl 3min videjko,a vnitřní se nedělá asi vůbec,ale jinak ok
Es más trabajo lo que el hace que nada más de montar y desmontar manualmente sin tanto show!!!
stands infront of the camera lol still good tho mate.
If you know that you're doing (I don't, but I've seen it done) you don't need the fancy tool.
@Donald Clark
Yes they do and I've known some good tire men over the years.
Post a video on RUclips for Millions to see and then proceeded to stand right in the friggin way go figure
Buenas como se llama ese equipo y cuanto cuesta
I need that here in the USA
I need that too but i dont know where to buy it in europa
❤❤❤
you guy's forgot to clean were the tire bead sit ..
wow that's almost as fast as our tire guy!
Супер. В принципе наз сойдёт а вот в перед баланс надо делать полюбому
Zapraszamy na nasz kanał - jesteśmy jedynym licencjonowanym producentem urządzenia Tire Spyder i kompaktowych mobilnych serwisów opon TORQ. Eurogold jest jednym z udziałowców naszej spółki i pierwszym dystrybutorem systemu Tire Spyder w Polsce.
My tire guy would of almost finished the entire axle by the time you set this junk up get your little bars on and the safety pin hed be drinking a tecate and be ready for the next axle
Exactly!
🤣🤣🤣
Do a video I want to see !!!
How many price this machine & where I bought it
Every tire changer I know can change a tire faster than this tool can...
nice video. i just see more people of a job
I think it’s a good idea,I like that companies are coming out with new ideas and to be innovative, but unfortunately a good tire guy could complete the job in nearly half the time. Perhaps a different approach would work better for you guys
Also let’s see it do an inside tire?
I've seen girls change this type of tire manually faster than this.
What your SISTER!!! the one with a beard!!
I know you're making that up. You ever changed a truck tire with the wheels still on the truck? Easier for me to just take them off.
Yeah, in very ergonomic way so that their back doesnt hurt in 10yrs lol
I dozed off watching the video when I woke up he still wasn't done
what if the inside tire is flat?
Buen día como se llama el desmontador que usar para quitar la llanta?
How can i change inside tyre
Cómo se aquiete una de está,y cuánto cuesta
Круто!!! Но как внутреннее менять??
Good work
7m
yeah right try it on a tire that's been on the rim for 100,000 miles rusted and stuck to the rim,thats reality,not a new rim and tire.good invention though.
He did not finish anyway,
ima stick to the iron bars.
I can dismount & mount a truck tire way faster than that with just two tire irons. Just sayin' . . . sometimes the old way is still the best way.
prove it
Witam. Moje pytanie: co z kołem wewnętrznym na bliźniaku/napędzie? bo pomysł jest świetny jeśli chodzi o koła skrajne a wewnętrzne ? Wtedy żeby taka oponę ściągnąć trzeba by odkręcić zewnętrzną tak?
Najlepiej zdjąć zewnętrzne koło (dlatego w naszym mobilnym serwisie TORQ - zapraszam do obejrzenia innych naszych filmów - posiadamy klucz pneumatyczny 4300 nM) wewnętrzne przykręcić tymczasowo w jego miejsce, dokonać zmiany opony i założyć koła na ich pierwotne pozycje. Jest mozliwość wykonania procedury, gdy koło leży na ziemii, a le z naszego doświadczenia wynika, że opcja pierwsza jest wygodniejsza.
the bead was already broken
Amazing love it !
This is the best !!!
Muy aparatoso el invento, otros con unos simples desmontables lo han hecho y más rápido.
Que ferramenta mas top onde consigo uma dessas
👍🏻 ممتاز جدا
y como la has destalonado????
Dobry patent!
Its a good tool for the shop and for rookies,but takes too long so not impressed
Good machine Friends
Try with an old tire and a not so new wheel IT WILL BREAK!!!!!
Espectacular
Muito boa máquina,e o pneu de dentro????
Muy bueno , pero si es la de adentro ?
تيذبمزذرم
Ahí ya caminaste compadre.
No ay como Desmontarlas al estilo callejero
🖒🖒🖒🖒good job..!
Faster with out that machine
Solomon Henfield
And after 8 tires, how’s your back doing bro? Years later, you’ll need back surgery.
The Reviewer if you know what your doing and you're not a pussy you can do it all your life. I'm faster then that I've been doing it for over 15 years and I'll still beat any young kid and my back is fine. Oh plus I log on the weekends. Just can't be a pussy and make dumd comments.
1 bar would be faster that hooking all that up.
A jeśli felga ma rowek z drugiej strony xD???
I can remove a tire by hand in less than a minute. That tool is crap.
Steve Artenian that’s right steve I was gonna say that but it takes me 30 sec and a other 30 sec to put the new one on
Na venkovní dobrý,ale co vnitřní?Stejně musí sundat disk,a navíc ten mastné bordel pod ním.
Siempre la de afuera pero avrer qe saquen uns de adentro seran muy practicos pero en loqe desmontan una ya desmonte tres
A druhé koleso?
Genius
tylko że na początku należy oponę odkleić od felgi co tu jest pominięte...
Amazing very fast
You think this is fast? I can do 2 and drink a beer by the time he's done fidgeting with this contraption
I must be one bad Spider
👍👍👍👍👍👍
Great !!
Very good ..