I love seeing this method from foreign countries when they’re loading / unloading 20 ton excavators on an off 8-10 ton flatbed trucks and it’s not only bending the bed, but lifting the front of the truck 3-5’ off the ground... all while parked on an incline. 🤣
That's a ridiculous thing to do. As an operator of a 325 cat I can tell u we only unload like this if we have no choice. This is just pretending to be an operator and putting urself and those passing cars at risk
Fine job till a hydraulic line blows because I'm sure none of those cylinders have check valves like a lift or bucket truck would have in case of a line failure.
And we wonder why we have so many dumb rules in the construction industry. Hope he got slapped with a heafty fine. If not keep on doing it he will end up dead yet
Its difficult when you have a machine worth $40,000 and you work for a company so cheap they won't even buy a trailer that can unload equipment. Good operator, terrible company.
And I guarantee this guy still has more useful skills than you will ever have with your 6 RUclips followers in the 10 years you've been "making content"
@@wumbologypatrick You're a 🤡. "Useful skills"?? So if he would've fell into oncoming traffic, would it have been a useful skill? As for my 6 subscribers, I don't make content dummy!! As far as my "useful skills", I don't need RUclips validation like some people. But go ahead and keep being a comment super hero, it fits you well Eddy
Sketchy as heck. Way easier if he had turned the machine around on the flatbed so he could put the blade on the ground first. I do it all the time. And wear your seatbelt.
Great job showing off, but if he is such a gun operator.?? Why didn't he not take the stress off his drive motor and those tiny little rubber tracks, and bucket steer the turn he did on the way into the driveway. Or should I say the shakey shake,
its funny.everybody can buy an excavator.but nobody can buy a trailer to haul them.& generally do more damage unloading & loading them than what the cost of a trailer is.
+goodcat1982 if you knew anything about excavators you would know that operating them like that will damage the machine. plus he was lucky he did not have an accident and hurt himself = inexperienced
Totally agree. Ramps are for weaklings. And they cost like 500 Dollars!!! Ok they save you 10 minutes arriving and departing every single day, but what the hell...
Think Float Blade should be first off the truck and lowered all the way down, then flip around with bucket. But truck driver is needed to drive truck away. So I guess this is the only way for a one man show unload.
This mini-ex is now in the scrap pile with ripped blade sub-frame assembly, rotating carrier main bearing split in half, engine main bearings numbers 1 and 2 spun from extreme angle oil starvation, both rear drive hubs cracked from overweight during high risk rotation maneuver, main boom fork cracked from hyper extension during max weight on both boom and fork......SMH.....
You must be a RUclipse theres some of us who are You Tubers we're the ones who are proving to the world that anything can be conquered. Leave being brave and adventurous to the rest of us "Wolves"
Приколы
This man is rough. But got the job done ✅
Good video .I just going to fix my ramp. Thanks for the warning!
The best way to unload the digger is close your eyes and track straight off and hope for the best!
MAD RISKY but clever man. I wish my job was as exciting as this.
I love seeing this method from foreign countries when they’re loading / unloading 20 ton excavators on an off 8-10 ton flatbed trucks and it’s not only bending the bed, but lifting the front of the truck 3-5’ off the ground... all while parked on an incline. 🤣
That is real easy to do. He made it look hard.
you are correct. touch the tracks.spin bucket on bed ,walk off,too easy
I love all these comments
Yea I might be dumb and yes I'm not an operator but fuck it was fun !! Thanks all for watching
It would have been about 500 times easier if he would have walked off blade first.
Simple as you see but SAFETY FIRST is the best GOT IT
Simple as you see but SAFETY FIRST is the best GOT IT
I think it took a set of stones to even try...
Good work bro...
Think i would buy me some ramps there slick!
The craigslist ad be like "only 3 hrs on it, its brand new"
That's a ridiculous thing to do. As an operator of a 325 cat I can tell u we only unload like this if we have no choice. This is just pretending to be an operator and putting urself and those passing cars at risk
Yeah that’s why my truck has a special feature it’s called ramps in it
@A random person Exactly.
Fine job till a hydraulic line blows because I'm sure none of those cylinders have check valves like a lift or bucket truck would have in case of a line failure.
cowboy it pussy
Hey, it’s my machine!
Keep on practicing. Overall for the last part
good skill, greetings from Indonesia country chanel👍
Like your guts man! This is amazin'!
It's not amazing it's completely stupid. It's only amazing to other stupid people
He's a fool
Possible future ideas........ramps and a decent operator.
xr8brisbane
I agree, I'm not an operator
But I sure had fun
xr8brisbane come
xr8brisbane where
That's pretty dangerous though, yeah? It even slipped at 1:29 that's how accidents happen man
He had the bucket too far ahead and the blade should have been on the other side
Crazy excavator DRIVER!!!
good job nice video
They make ramps for these situations, the job would be done already by the time you got that off the truck.
😂😂
great job
Invest in some ramps
Good job 👍👍
That was intense 😆
Looks like he was trying to look cool
But didn’t have much of a clue on what he was doing.
Wawoo great work man
I like it
Robert Salloum delta
Thank you
I'm not an operator but it sure was fun trying
Great job
Clever brave and skilful but a few dollars on ramps would make life easier and the job a lot quicker.
First time I was ever on one of these I had to do this
Why wouldn't you just get a set of ramps 😂
We say that every day, pinchi wedo lolllll
Putting a lot of trust in that machine! Disasters happen because of that
That bad boy brand spanking new ☝️🤡
You have to have trust in the machine
Never a doubt, didn't even bother to stop traffic.
not only is it safer than ramps, it's faster too! lol!
There's a thing called ramps.. would of been off in 60 seconds haha
crazy! i love this kinda stuff 👍
Great job tho man
Очень хотелось бы посмотреть погрузку экскаватора ,на эту платформу, этим же водителем ... 🤓👍
That guy has got some confidence but no regard for his safety or other people. Not to mention his skills leave much to desire.
Parabéns operador realizou a manobra, mas demonstrou insegurança.
maybe try a ramp
great video about WHAT NOT TO DO AND HOW NOT TO DO IT!
Brian Taborek
Exactly! See you get itl! Lol
I'm not an operator but had fun trying
Thanks
And we wonder why we have so many dumb rules in the construction industry. Hope he got slapped with a heafty fine. If not keep on doing it he will end up dead yet
I've seen this done before and it didn't look nearly as difficult as this guy made it look.
I've watched like 10 of these and this guy was obviously new at it. The pros all had their first time also once. This guy just filmed his.
Its difficult when you have a machine worth $40,000 and you work for a company so cheap they won't even buy a trailer that can unload equipment. Good operator, terrible company.
And I guarantee this guy still has more useful skills than you will ever have with your 6 RUclips followers in the 10 years you've been "making content"
@@wumbologypatrick You're a 🤡. "Useful skills"?? So if he would've fell into oncoming traffic, would it have been a useful skill? As for my 6 subscribers, I don't make content dummy!! As far as my "useful skills", I don't need RUclips validation like some people. But go ahead and keep being a comment super hero, it fits you well Eddy
Sketchy as heck. Way easier if he had turned the machine around on the flatbed so he could put the blade on the ground first. I do it all the time. And wear your seatbelt.
u were lucky there!
Great job showing off, but if he is such a gun operator.?? Why didn't he not take the stress off his drive motor and those tiny little rubber tracks, and bucket steer the turn he did on the way into the driveway. Or should I say the shakey shake,
shaun sinclair I thought the same.
I wish I could do that. Crazy is all right.
If the blade was in front,would have been so easy to do it
Bravo!!👍👍👍
Is this standard procedure for these things?
No!
@@emosean66 didn't think so lol
I’m just lazy!
It'd be easier if you wanted some stands that just make it go down off that truck and they just load it on the truck whenever you unload that
It took him long enough he should have kept the blade in front of him it would have been easier
Should have dropped the blade sooner to lift the bucket off the trailer. Good stuff though
pametni amerikanac,mora on naopako i komplikovano...
Would Quicer witth ramps
I do that all the time off my hydraulic dovetail😅
Well that took some balls.
balls of steel !!
No Ramps needed ????? o well......
now show us you getting back on!
素晴らしいテクニック
Just because you can, doesn't mean you should!!!
Muß das sein ? Zwei Rampen kosten nicht die Welt.
Stopped watching with 2:40 left, get u a trailer bro. 🍺🍻👍
why do that next to a busy road. If you flipped the machine someone could get killed.
and spin, into traffic, you could have spun the other way, goes to show i dont think he knows this machine very well
He is an absolutely shit operator. Now you know he doesn't know the machine at all.
With a bit of luck.
yeah but the earth is overpopulated and if you read any youtube comments you know most people are a-holes.
wo hast du denn baggerführerschein gemacht im lotto gewonnen so siehts aus omg Wtfund schon mal was von Rampen gehört
I don't even speak German but I understand this..lol
Mission accomplished.
Don't be so tight and buy a set of ramps
its funny.everybody can buy an excavator.but nobody can buy a trailer to haul them.& generally do more damage unloading & loading them than what the cost of a trailer is.
Good..👍
Lucky boy, you nearly fucked that up !
Kerenn 👍🏻👍🏻👍🏻
This is the most inexperienced operator ive ever seen
+goodcat1982 if you knew anything about excavators you would know that operating them like that will damage the machine. plus he was lucky he did not have an accident and hurt himself = inexperienced
I'm not an operator, just a dumb ass
I had fun though
Thanks
You haven’t seen allot of operators then.
That was tense...
Thank you boss
That dude got lucky. He’s no operator.
Is that not a rollback???
No
Pretty ballzy for an amateur operator but hey, you pulled it off.
Was thinking the same as you
I'm not doing that with my Home Depot rental but you know your shit dude!
Zt Weve
Thanks bro!
NUTS AND DANGEROUS!!
Totally agree. Ramps are for weaklings. And they cost like 500 Dollars!!! Ok they save you 10 minutes arriving and departing every single day, but what the hell...
Cool...
Fair play you got it off and most likely 90% of people commenting couldn't do
It but why do it on a busy road
Ryan Ritchings
Bro! This is Los Angeles every road is busy
I'm not an operator but I really had fun trying
Thanks for the comment
👍🏻
3:12 😮
Super
Think Float Blade should be first off the truck and lowered all the way down, then flip around with bucket. But truck driver is needed to drive truck away. So I guess this is the only way for a one man show unload.
I get out and do that myself, drive forward a bit. Not too much.🙂
why risk a $ 40,000 dollar machine, also the angle of the machine that engine is starving for oil i am assuming he is not the owner.
Musta been a rental
Tak tak gwoździe też można wbijać kamieniem . Niepotrzebne utrudniania sobie życia wystarczą dwie przenośne rampy i koparka zjeżdża w 5 sec
Plumb crazy
Nice
This mini-ex is now in the scrap pile with ripped blade sub-frame assembly, rotating carrier main bearing split in half, engine main bearings numbers 1 and 2 spun from extreme angle oil starvation, both rear drive hubs cracked from overweight during high risk rotation maneuver, main boom fork cracked from hyper extension during max weight on both boom and fork......SMH.....
Ladies and gentlemen look s like we spent all our money on the truck and excavator and can not afford to rent a trailer
He made that look dangerous
Better if the blade was on the other side
Wouldn't even attempt that at half the height. Ramps are cheap compared to what could happen.
This is one those videos you see in a large jobsite safety orientation trailer.
A pair of sliding ramps and he could load/unload that while he's thinking about doing it this way.
just fork out the money for some ramps, alot easier...
You must be a RUclipse theres some of us who are You Tubers we're the ones who are proving to the world that anything can be conquered. Leave being brave and adventurous to the rest of us "Wolves"
Works 9/10... 1/10 something breaks...
Blade should have been facing the rear