Freaken awesome. I put together lots of things from tube steel. Mostly I use a lot of corner magnets, flat surfaces, clamping things together with plates. Tacking things together strategically to tap them into position, etc. This looks like it could save a lot of labor
I see a LOT of rubbish "inventions" on RUclips, But I really think that this device could/would make Fabrication tasks a lot easier in certain situations. Especially when working on long braces alone. 👍👍
Awesome idea😁👍. It is not easy to make something with a few pieces that can solve big problems, but you made it😁👍. Many things only let you have 90 and 45 degrees. With your tool you can weld any angel you want✌️
@@Инквизитор-с3в если заготовки длинные и(или) тяжёлые, то магнит не справляется, к тому же металл "ведёт" от перегрева. Можно магнитом задать угол и накрепко зажать в таком устройстве.
I will like to please know what the input and output voltage is. I mean the voltage you fed the microwave transformer with and the voltage it gave out.
Hi, I am a Korean engineer.I want to make and use this device that I made with your idea. For your information, I am a supertuber and I want to change this idea a little bit and upload a video. Can you give me permission?
Thank you. One of the best videos I have watched: very clearly presented and no distractions like music. I have already started making this. Cheers
Brilliant piece of kit. Thanks for sharing :) Couple up with a digital inclinometer/protractor, this opens up a lot of possibilities
Hay quá anh bạn
Wonderful and simple idea! Thank you very much for sharing.
Отличная идея,и не сложно в изготовлении!
Хорошая идея . РЕСПЕКТ И УВАЖЕНИЕ.
top.. love from Indonesia 👍
Thank you from Indonesian country
APPRICIATABLE ND VERY USEFUL IDEA. PROFITIONAL. THANKS. GOD BLESS U TO IMPROVE MORE. NDMORE.
Начал только смотреть а в голове сразу голос доктора
Проверь голову
Голоса просто так не бывают
Глазаааа
драсти
Awesome… very beautiful 👌
Fully watched 👍👍👍👍👍
Отлично! Редко такое правильное видео попадается!
👏👏👏👏excelente seu vídeos parabéns pelo seu trabalho muito profissional
Freaken awesome. I put together lots of things from tube steel. Mostly I use a lot of corner magnets, flat surfaces, clamping things together with plates. Tacking things together strategically to tap them into position, etc. This looks like it could save a lot of labor
you are absolutely right... but the idea or the invention is not bad
I thank you for your comments. I will create useful items for life. I hope you guys always watch my videos.
Very unique and he has high level apptitude. Has to come out with many such posts
You are so amazing 👍
Muy bueno se le agrades por mostrar este video .se vee útil para soldar.gracias desde chile
Спасибо большое за Ваши видео!
Fantastic job... Thanks🌹 now we're try
Muito bom, ferramenta , útil,
Top
Xin cảm ơn anh đã chia sẽ
I've welded for a long time, I have never thought about it but this tool is a dream, great idea !! I like it !
Thanks
I see a LOT of rubbish "inventions" on RUclips, But I really think that this device could/would make Fabrication tasks a lot easier in certain situations. Especially when working on long braces alone. 👍👍
Sensacional a sua ideia...parabéns...
Parabéns pelas criatividades.
Alexania | Goiás
BRAZIL
Третья рука. 👍
Awesome idea😁👍. It is not easy to make something with a few pieces that can solve big problems, but you made it😁👍. Many things only let you have 90 and 45 degrees. With your tool you can weld any angel you want✌️
Great idea with this setup !
I like it! Quick instructions on how to make it! I did not get bored before the ending. If I get time I'll make one. Super thumbs-up!
Simple and awesome 🤔🤔🤔💞💞💞💞💞👏👏👏👏👏
На редкость годные приспособления на этом канале. Спасибо!
you soooo brilliant ....
.......
❤️❤️❤️❤️❤️
That is very useful for any fabrication
I am from Nepal good job bro
Muito bom mesmo valeu amigo obrigado por compartilhar boa ideia 👀👏🇧🇷🙋👍
🙋👍
С технической стороны очень интересно! Но на практике, мусор своими ✋💪
Briliant idea 👍👍
Good job 👍👌👌👌👌👍👍👍
Parabéns! Muito bom a ferramenta!!!
Great tool build.
Great upload 😍 let's do this
Merci pour cette vidéo démonstratif vraiment génial merci encore
ủng hộ a đôi loa đi hehee
Ca nhạc là niềm đam mê của em đấy , mấy kênh bán audio kênh nào em cũng biết .
@@5phutsangtao-iQ hn ủng hộ giảm giá sâu a nhé hihi
Интересная идея. Так можно и разборные соединения делать!
А обычные магниты для сварки уже не работают?
@@Инквизитор-с3в если заготовки длинные и(или) тяжёлые, то магнит не справляется, к тому же металл "ведёт" от перегрева. Можно магнитом задать угол и накрепко зажать в таком устройстве.
@@malekadel2812 видно, что устройство хилое.....тоже тянуть длинные заготовки будет
отличная работа...
Muy bueno. Ya estoy armando 4 para usarlos de esquineros.
Very good idea 👌👌
Good idea brother
That’s why I couldn’t properly and evenly weld profile pipes! I just didn’t have this homemade!
Good idea! 👍👍👍
estou muito feliz pelo seu comentário
Qué genial maestro lo felicitó
Good work 👍👍👍👍👍👍
That is the neatest clamp ever could easly use it in the wood shop also
Excellent 👌👍
Amaizing 👍👍👍🙏
Good idea👏
Super great idea
ficou Show parabens ...
Los planos muy bueno el video educativo
Ótima ferramentas parabéns
Obrigado pelo seu elogio
Хорошее приспособление!!!
welcome and thank you too👍🏻👍🏻❤
Отличная идея!!
На центральный болт поставь пружину и 2 шайбы
I will like to please know what the input and output voltage is. I mean the voltage you fed the microwave transformer with and the voltage it gave out.
Good video
Amazing bro 🤩
👍💖😀
Молодец!!!
Amazing 😍
Brilhante ideia...
Good idea sir g
素晴らしい✨✨👍
I'm so glad you often watch my videos
Amazing! 🇧🇷
good work
excellent my friend
Gostei é muito bom para fazer montagem
fico muito feliz pelo seu comentario
Hữu ích
Keren 👍👍👍
Superb idea.
thank you
Nice bro
Wow amazing
Parabéns !!!
Thông minh! Kkk
This is so mesmerising that I forgot what was being built until the yellow paint came into the picture 🙈😂
А какие пртемужества у данной струбцины перед сварочными магнитами??
дороговизна магнитов.
Just spend 5 bucks on a magnet, that 18g steel won't hold anything straight.
Super👍
Awesome :)
Sería genial tener la posibilidad de soldar también en el 3 eje..
А нельзя ли этим же 02:00 угольником и воспользоваться?
А о чем видео тогда снимать? 😂
К доктору Дью, срочно!!
@@ДенисТ-щ2о и что будет?
Можно, но здесь можно задать любой угол, а на магнитах фиксировано 90/45/60/30
🤦♂️ существуют магниты для этих задач!
Кто-нибудь покажите ему магнитные уголки.
Магнитные уголки , они вредные для здоровья, а это , экологически чистое...
Красава прям с языка снял )))))))
Сейчас он подзаработает денег на просмотрах и приобретёт магнитные уголки.
250 полуляхов из 250.
Excellent
Hi, I am a Korean engineer.I want to make and use this device that I made with your idea. For your information, I am a supertuber and I want to change this idea a little bit and upload a video. Can you give me permission?
thank you
Too good
Vary good tankyo
Не проще было магниты купить?
❤️❤️❤️❤️❤️❤️❤️
Perfect brow
Perfect brow
👏👏👏👏