How to fix ELM327 wifi conection problem (Android or iOS)

Поделиться
HTML-код
  • Опубликовано: 8 сен 2024
  • This video shows how to configure wifi setting on your mobile phone to connect your ELM327 diagnostic device
    ( Android or iOS does not matter)
    Imagine your car has broken and you are far from any automotive service center what should you do? Wasting a lot of time !
    you can do it.Find faulty codes and lots of time there is a loose wire or faulty sensor that could be repaired very easily by yourself.
    Save your money in your pockets.
    You could also check this video to see how does it work?
    • How to use WiFi OBD II...

Комментарии • 67

  • @ilyjad
    @ilyjad 2 года назад +1

    Thank you! worked for me! Android 12 user.

  • @mmw78
    @mmw78 9 месяцев назад

    gracias por tu video, excelente informacion.

  • @anarchistangler
    @anarchistangler 4 года назад +7

    With some cars it will connect the phone and device with Bluetooth, but when you try to check codes it will say can't connect to ECU or suchlike.
    In that case go into Torque settings, click OBD 2 Adapter Settings, and then Choose Bluetooth Device and make sure you check the OBD 2 box.
    That one really had me stumped for a bit.

  • @cu2max
    @cu2max Год назад +1

    everything connects fine, but when I try start diagnostic, the access point disappears, what should I do? is this a defective adapter?(

    • @bestofmyexperience2820
      @bestofmyexperience2820  Год назад +1

      Maybe. But first check if you put the switch in ON position first then check with another car and also another phone.

  • @Khoshnevisinastaligh
    @Khoshnevisinastaligh 2 года назад +1

    Nice job

  • @jrw8080
    @jrw8080 Год назад +1

    Will this work for other obd2 port adapters?

  • @zayedzayed6002
    @zayedzayed6002 День назад

    My mobil no obdll wifi connate

  • @UnFazedGuy
    @UnFazedGuy 2 месяца назад

    What if mine doesnt show that red light and doesnt turn on?!?

  • @brownies-midlifeadventure5333
    @brownies-midlifeadventure5333 2 года назад +1

    My ELM does not show up in the wifi section of my phone, all the other available networks appear. Is mine faulty?

    • @bestofmyexperience2820
      @bestofmyexperience2820  2 года назад

      It might be faulty but after connecting ELM ‌to OBD2 connector did you put the switch on the ON position?

    • @TheLoneRanger1992
      @TheLoneRanger1992 Год назад

      @@bestofmyexperience2820 where is the switch?

    • @AGM240i
      @AGM240i Год назад

      @@TheLoneRanger1992have you solved the problem with connection?

    • @carloseberl6949
      @carloseberl6949 9 месяцев назад +1

      There is no switch... I have the same problem mine ELM doesnt even show up

    • @nawaf_99_28
      @nawaf_99_28 7 месяцев назад

      Me too 💔

  • @c20xe
    @c20xe Год назад

    TOP. thanks a lot

  • @akis28
    @akis28 Год назад +1

    Not working, it says it can’t connect to ECU

  • @alijaber1519
    @alijaber1519 4 года назад +1

    Not connecting to ECU what is the prblem?

  • @fayazimeisam
    @fayazimeisam 2 года назад +1

    It dosent work for my car
    Its chery
    Can you help me

  • @stevesamuel6603
    @stevesamuel6603 2 года назад

    Dude please help me , I brought one exactly the same as yours , I connected it shows no internet then I go to torque app and the blinking of lights don't stop and just shows connection refused or error connecting or somethin'

    • @bestofmyexperience2820
      @bestofmyexperience2820  2 года назад

      Did you put the switch on ON position?
      There is not any special problem that you can't do it. Just try with another phone and at last another car

  • @siwienchanel2947
    @siwienchanel2947 3 года назад

    Conect to my obd2 but no internet access, because my WiFi internet conection changed obd2 device than pairing not connected to ECU, what's the problem?

  • @NewsBroadcasting
    @NewsBroadcasting 3 года назад

    Question, my ELM327 arrived in ADHOC mode (stupid) for 6 years i would use it searching non stop for an STN or Infrastructre mode or Version of the product, one day i decided to see if port 80 is open , it was (HTTP GUI), i switched it to Station mode, i entered SSD, Encryption (WPA2PSK CCMP) and the key ( even kept a screen shot) the ELM327 connects a few seconds to the AP and disconnects. I made sure the AP is set to the same Encryption type, and key... I even set a static/Fixed in the ELM327 .. Any tips? The unit is close to AP, tried many APs, legacy, wrt54g, dd-wrt. different channels. no go .

    • @bestofmyexperience2820
      @bestofmyexperience2820  3 года назад

      Well please check the ELM327 unit with any other unit to make sure if it is OK or not. Then restore any changes to default mode and try again. Could you change the software that you are using?

    • @NewsBroadcasting
      @NewsBroadcasting 3 года назад

      @@bestofmyexperience2820 its not a a client software issue. its not connecting to the network . it needs a reset

    • @serlimon1
      @serlimon1 6 месяцев назад

      It seems that AdHoc is not compatible with Android, in a notebook connect the device as well as possible, is there any firmware update that AdHoc does not use?

  • @benshaw576
    @benshaw576 2 года назад +1

    Your voice gives me ASMR 😂😴

  • @anwarsikumbang3319
    @anwarsikumbang3319 3 года назад +1

    Your phone can show the setting which is located left side below. While at my phone that setting are not shown. How to show the setting button on the phone?

  • @chengaiksaw1981
    @chengaiksaw1981 4 года назад

    What are you using the software ODB2 WiFi scanner? I need find iOS software my car is Honda Hybrid Insight 2012

  • @omarmajid1343
    @omarmajid1343 Год назад

    Iphone x max ios 15.6.1
    It is connected by wifi
    But not working to any apps

  • @zxuu
    @zxuu 3 месяца назад

    It doesn’t work with me

  • @yvestcheza
    @yvestcheza 9 месяцев назад

    Can it fix something?

  • @Grenadieros
    @Grenadieros 4 года назад

    When we do not have WiFi (let's say we not close to our house) but only Bluetooth and the ELM327 does not recognize our ECU what can we do?

    • @bestofmyexperience2820
      @bestofmyexperience2820  4 года назад +2

      WiFi of your mobilephone not your house!!!
      Do know the deference?!

    • @Grenadieros
      @Grenadieros 4 года назад

      @@bestofmyexperience2820 : I made a friendly question,no need for irony !
      I asked this ( you also will knew it if you have made some research) because many drivers here in RUclips complain that the ELM327 can not be recognized by their ECU and some suggested the first they must run the CD driver of the package in their home PC, then download it in their (android) cell phone and they must go to their car for install.
      That's why i asked you with a gently manner,if you doubt take a look
      www.google.com/search?newwindow=1&client=firefox-b-d&biw=1920&bih=930&tbm=vid&ei=PMQNXpHgIYyGgQbeqpnwBQ&q=ELM327+failed+connection&oq=ELM327+failed+connection&gs_l=psy-ab.3..0i8i30k1.20741.23043.0.23523.11.10.0.0.0.0.247.787.0j2j2.4.0....0...1c.1.64.psy-ab..7.4.784....0.oNm9wkud7bo
      Since your procedure takes a lot of MB maybe a driver has some problem
      By the way: irony from a distance does not add years on your life or would not improve your health.

    • @bestofmyexperience2820
      @bestofmyexperience2820  4 года назад +1

      I really did not mean it.
      You can install any software from play store or ...
      WIFI is the way your cell phone and ELM327 communicate each other
      So please watch the video carefully and if you had any problem please let me know🙏🙏🙏

    • @Grenadieros
      @Grenadieros 4 года назад +1

      @@bestofmyexperience2820 : OK sir thank you a lot.

  • @iturbogolf
    @iturbogolf 3 года назад +1

    讚啦!!!

  • @lupu8341
    @lupu8341 5 месяцев назад

    Not found wifi

  • @flojotube
    @flojotube 2 года назад +1

    SPEAK UP LIKE A MAN

    • @bestofmyexperience2820
      @bestofmyexperience2820  2 года назад

      Thanks. ❤️

    • @flojotube
      @flojotube 2 года назад +1

      @@bestofmyexperience2820 don’t mention it! If men don’t remind men to be men, we will soon have none left.

  • @Kissdaboss
    @Kissdaboss 3 года назад

    Does not work for me on iOS :( Still unable to connect

    • @bestofmyexperience2820
      @bestofmyexperience2820  3 года назад

      Try to check with an android phone to check if your device is OK or not.

    • @Kissdaboss
      @Kissdaboss 3 года назад +1

      @@bestofmyexperience2820 yes, that’s the plan. Either an iOS bug or my device is not good.

  • @TheYouCruiser
    @TheYouCruiser 4 года назад +2

    Why are you talking so LOW? Try explaining what you're doing if you really want to help people.

    • @bestofmyexperience2820
      @bestofmyexperience2820  4 года назад +5

      Well English is not my first language so I'm trying to to do the best 🙏🙏🙏🙏

    • @scotgustafson3270
      @scotgustafson3270 3 года назад +3

      I actually found your low tone to be more understandable than those who want to shout.

  • @boblast9997
    @boblast9997 4 года назад +1

    Mine says connected no internet