Well said, “it was worth a shot and we learned something new “. I’ve learned a lot about this hobby from you experimenting just like this. Keep em coming you mad scientist 👍✌🏼
I just ordered one. I want it to go way slower, like the FOC mode on my SCX24 Crawlers. Also wish it was as small as those. Looks too complicated to modify for me though. Hope i like it like is when it arrives.
Well... At least you tried. 😕 Anyway, they need to make an all metal version! With metal gears and so on. Then things get easier. 😊 Anyway, stay safe there with your family! 🖖😊
Cool project! Thanks for sharing it! 👍💪🙏 'd like an autopsy and another attempt! 😁 (On the other hand, im sure there are a lot of reasons people at Rossa aren't using tracked vehicles on their speed runs... 😅) Noob here: Are you supposed to feed a receiver from two ESCs? I believe it's better to remove the power wire from one of them. If you don't, I think it will be receiving power from both. Depending on each ESC's BEC voltage and the power limits on your receiver, you may fry it. 😛
I wonder if you could send the gears, diff etc away to some place like "send cut send" & have them all CNCd out of metal.? Imagine how mad it would be if it was all aluminum, the body & everything so it could handle super crazy power. Heck, why not get it upsized to 1/5 scale... Having a 1/5 scale 12S Ripsaw would be EPIC.! And also, y'know.. Ruinously expensive.! 😉 😉 😂 😂
the inserts on the references were straight hilarious. 2s looks about perfect for that thing...if it would hold up. You know, at least until you ran it into a wall. 😂 3s would be totally bonkers! 😂😂
This brings back memories of the Tyco Fastraxx i had as a kid. It was made when the Bandit truck, Typhoon hovercraft, and the buggy Tyco made were all popular. I had them all at one time or another but had several Fastraxx because it would go thru grass and offroad better than all the others that were just 2wd or the hovercraft that was smooth flat surfaces only pretty much.
Great experiment. Hopefully the manufacturer sees your vid & does a 2s version as I'd buy that. Hope they also cut you in for a share of the millions of $ they'll be making!
Dang dude, Yawll gone dun an broked it. Next time all metal drive train. It IS possible with a bit of jiggery pokery and the gearbox from a proper RC tank.. Have Fun
issue here is mainly the cheap transmitter. If you have a expensive one you can program smooth start. Ripping off gears is mainly an issue when standing start ( where max torque happens) or if its blocked. But if you can program a smooth start spin of the motor, that wear out will be much reduced. Thats the downside of cheap TX.
I'm gonna mod mine to change the battery to the back seat aswell. I just got it but theres verry little space in the actual tray. Also switch the plug to a T plug. I also hate how the tray is held by a screw and transmitter battery tray aswell.
They are kinda all the same. Made in the same factory just rebranded. I've been using Surpass for years and have had amazing results. Best Budget brand
What did we learn today ? When you double the power of your RC car, the gears & tracks may not withstand the extra. How strange ! Who would have guessed it ?😄
This brings back memories of the Tyco Fastraxx i had as a kid. It was made when the Bandit truck, Typhoon hovercraft, and the buggy Tyco made were all popular. I had them all at one time or another but had several Fastraxx because it would go thru grass and offroad better than all the others that were just 2wd or the hovercraft that was smooth flat surfaces only pretty much.
The Diddy reference for being well lubed. 😂😂😂😂
🤣👌
@@disciplinerc Laughed out loud sooo much with that!! nice touch Aaron!
I thought it would slip by you!
@@rcinhand9671 nice 👍
😮😮😮😮😮@@disciplinerc
Well said, “it was worth a shot and we learned something new “. I’ve learned a lot about this hobby from you experimenting just like this. Keep em coming you mad scientist 👍✌🏼
Copy that, will do 😉👌
@@disciplinerc pretty please go crazy and upgrade that fury the way you did with that Gorgon.🙏🏽
Tu rêves lol
@@Rangoli_rc on it 🤘
Really like your style of videos, man! U keep on trying to have fun and we'll keep on watching!!
Cheers from The Canary Islands 🤗
Thanks dude! Gotta have some fun 😉👌
Now rework it! Remove the internals, go to a single esc, dual motor (one left, the other right) setup and go again. You can do eet!
Direct drive, think I might. Not alot of room in there tho, but worth a look 👍
Would have loved to see the carnage inside the gearbox as an ending to the video. Maybe a follow up? 😈
The original one of these based on the Warthog had optional metal gears. That might handle the power better.
Great mod tbh, well done on the esc combo
I just ordered one. I want it to go way slower, like the FOC mode on my SCX24 Crawlers. Also wish it was as small as those. Looks too complicated to modify for me though. Hope i like it like is when it arrives.
Lasted longer than expected!!!👍👍👍👍👍👍
🤣🤣
Well... At least you tried. 😕
Anyway, they need to make an all metal version! With metal gears and so on. Then things get easier. 😊
Anyway, stay safe there with your family! 🖖😊
One of these companies needs to build that in like a 1/6-1/10 size.. Help me spread the word my friend...!! 🤟👋 Great videos!!
Cool project! Thanks for sharing it! 👍💪🙏
'd like an autopsy and another attempt! 😁 (On the other hand, im sure there are a lot of reasons people at Rossa aren't using tracked vehicles on their speed runs... 😅)
Noob here:
Are you supposed to feed a receiver from two ESCs? I believe it's better to remove the power wire from one of them. If you don't, I think it will be receiving power from both. Depending on each ESC's BEC voltage and the power limits on your receiver, you may fry it. 😛
I had nikko velocitrax cool toy gr. Rc you should get one and brushless swap with beter controler to set up steering
Great vid. Got mine but it is still in the box. Not enough time to start playing….
So much potential and great thinking outside the box 👍
Well now I feel bad that I was one of the people who ask for this. That was a lot of work but it wasn't for nothing! I highly enjoyed watching it!
Someone make metal gears for this....
I wonder if you could send the gears, diff etc away to some place like "send cut send" & have them all CNCd out of metal.?
Imagine how mad it would be if it was all aluminum, the body & everything so it could handle super crazy power.
Heck, why not get it upsized to 1/5 scale...
Having a 1/5 scale 12S Ripsaw would be EPIC.!
And also, y'know.. Ruinously expensive.! 😉 😉 😂 😂
Is that a 1000 bottles of lube on the gears? Diddy would approve!!
Bam!! Well said 😂
the inserts on the references were straight hilarious. 2s looks about perfect for that thing...if it would hold up. You know, at least until you ran it into a wall. 😂 3s would be totally bonkers! 😂😂
Music has an Iron Maiden vibe!!!
We need a follow up of this hopefully getting it to work better
This brings back memories of the Tyco Fastraxx i had as a kid. It was made when the Bandit truck, Typhoon hovercraft, and the buggy Tyco made were all popular. I had them all at one time or another but had several Fastraxx because it would go thru grass and offroad better than all the others that were just 2wd or the hovercraft that was smooth flat surfaces only pretty much.
Great experiment. Hopefully the manufacturer sees your vid & does a 2s version as I'd buy that. Hope they also cut you in for a share of the millions of $ they'll be making!
That would be awesome! Fingers crossed 🤞
I think it was worth it. That was pretty cool
Thx bro 😁🤘
You don't need a strong ESC for that small motor. Will work with receiver's current just fine.
Hi, what do you think of Surpass? What is the difference between a red Surpass and a rocket Surpass?
Surpass has been my go to for years, very good quality and performance. The Rocket cans use better grade aluminum but very similar
Dude that was so awesome for a minute 😂😂😂 the Diddy thing had me rolling 😭🤣 cheers
YES!! 😅🤘
Dang dude, Yawll gone dun an broked it. Next time all metal drive train. It IS possible with a bit of jiggery pokery and the gearbox from a proper RC tank.. Have Fun
"ok 3s": proceeds to literally fly apart 😂
Yep 😂👌
Thanks bud for the entertainment a blast always
Cheer bro! 😁🤘
Send me it so i can try to fix it I could remove the gears and put n20 motors on the sprockets
I can even try to design parts to 3d print
That was brilliant.
YES!! 😜🤘
It worked for a while 😊🤘✌️
True enough 😅👌
Indeed
With all 3 wires from both ESCs being used, I'm surprised there wasnt a BEC issue.
issue here is mainly the cheap transmitter. If you have a expensive one you can program smooth start. Ripping off gears is mainly an issue when standing start ( where max torque happens) or if its blocked. But if you can program a smooth start spin of the motor, that wear out will be much reduced. Thats the downside of cheap TX.
I'm gonna mod mine to change the battery to the back seat aswell. I just got it but theres verry little space in the actual tray. Also switch the plug to a T plug. I also hate how the tray is held by a screw and transmitter battery tray aswell.
The P. Diddler showed up😮 -😂
😅👍
i was waiting for sssoooo long for you to post thanks whens the next vid love them keep it up
Cheers brother, more to come. Waiting on this beautiful wet weather to pass, but fall is here and so is the rain ☔🌧️😬
Muchos piñones plasticos se derritieron por la potencia mi querido Amigo indisciplinado😂😂😂😂❤❤❤
Yep, I'll have to do an autopsy to see the damages 😅
Ooo please show us what broke!
I'll be cracking into it soon 😉
Cheaper than a college engineering course!
You're welcome 😜👌
The diddler 😂😂😂
Pretty impressive nonetheless
It was fast until it wasn't 😅👌
Love you radio face!!!!!!
Video killed the radio star 😅👌
I put a 3s in mine.. blew the transmission
Hi, what is the best surpass engine, quicrun or ezrun?
They are kinda all the same. Made in the same factory just rebranded. I've been using Surpass for years and have had amazing results. Best Budget brand
It had the nugget sauce while it lasted! 😂
I know right? Nothing like hours of work for seconds of run time 😅👌
@@disciplinerc oh ya I’ve been there 🥲😅🔥🔥
No way did that ESC setup work.!!
That's 🤪 🤪 😂 😂 😂
Shame it didn't hold up..
I had the slow version originale 😂😂
That really is a Ripsore.
Savage Lube XD
😂😂
I thought this was the model with all metal gears in it..?? Shows it that way on AliExpress 😢
Hmm, maybe that's a V2? I'll have to check it out
Brushless overrated* 😎
especially if it is sensorless.
But sensored 😍
Yes, love a nice sensored setup too 👌
What did we learn today ?
When you double the power of your RC car, the gears & tracks may not withstand the extra.
How strange ! Who would have guessed it ?😄
😅👌
Cool
🔵🔵🔵🙂🙂🙂👍👍👍🔵🔵🔵
🤘😎🤘
Oh the memes 😄👍
😂😂
1:37 um actually, it's a 130 dc motor🤓☝️
Copy that
SHHHHH, I AM CARPET!
Ah, I See You're a Man of Culture As Well
I love you bro 🤘❤
😁🤘
Hello
Hi! 👋😊
It’s getting it now !!! Who says that lol
😂😂
🫣
😁👌
@@disciplinerc 😎👍
I am sad 😂😂😂
😭💔
😂dude you are really so crazy...
Yeah buddy!!! 😜🤘
@@disciplinerc 🤣🤣🤣👍👍👍👍👍👍👍
❤
🤘😎🤘
Well hey, hacking together the build was cool anyway!
Cheers dude! Sometimes it's the journey that counts 😅
I'm doing it hahahaha🎉
Not
😜
I’m late hehe..
Better late than never bro 😁🤘
3D print up a mount so you can have one motor per track and run it like a proper tank.
That's a great idea actually 🤔
Jess Toke my money speder me for sand me
Entertaining, as always . 🫣😁
🙏😁
This brings back memories of the Tyco Fastraxx i had as a kid. It was made when the Bandit truck, Typhoon hovercraft, and the buggy Tyco made were all popular. I had them all at one time or another but had several Fastraxx because it would go thru grass and offroad better than all the others that were just 2wd or the hovercraft that was smooth flat surfaces only pretty much.