hi ,Great video , i have these filters brilliant and really quiet .there were a few problems with first generation but the latest version you can not go wrong .i replaced all my EHEIMS with the ULTRAMAX filters so far I am well impressed .but just a question ,I adjust the flow down during feeding, can the flow be kept down 10 to 15 percent constant ?
Turn off IN valve for 3 seconds, turn off OUT for 3 seconds, - unplug filter, open only the front and side big clamps and voila no more water leaking, might need a tool to open the prefilter due to vacuum
my Ultramax 2000 has been pumping really slow, like a trickle - so I cleaned the filter, removed the impeller and cleaned (it was much cleaner than yours in the video lol) and put it back and it's still not pumping very efficiently - just a little better than before. any ideas?
Been using these filters for over 1 year now, no issues at all so far, crystal clear water and pin drop silent, clean them out once every 3/4 months. Value for money I say.
Great, everything done well, would say it would be smart to take a spring brush and push inside the head near impeller (where the red rubbery thing is) to clear the OUT way in the head itself, is collects a lot of filth and is known to reduce flow rate.. 🙂
hi ,Great video , i have these filters brilliant and really quiet .there were a few problems with first generation but the latest version you can not go wrong .i replaced all my EHEIMS with the ULTRAMAX filters so far I am well impressed .but just a question ,I adjust the flow down during feeding, can the flow be kept down 10 to 15 percent constant ?
Great canister filters!
Thanks for this, time to clean out the impeller for the first time now.
Hello, when you open only the pre-filter part. Does the filter leak a lot? Can I open only the pre-filter part in my living room ?
Put down a towel and have a bucket handy should be fine. I've done that fine. Probably wouldn't if I had carpet there.
Turn off IN valve for 3 seconds, turn off OUT for 3 seconds, - unplug filter, open only the front and side big clamps and voila no more water leaking, might need a tool to open the prefilter due to vacuum
Thanks!
my Ultramax 2000 has been pumping really slow, like a trickle - so I cleaned the filter, removed the impeller and cleaned (it was much cleaner than yours in the video lol) and put it back and it's still not pumping very efficiently - just a little better than before. any ideas?
nvm problem solved my dumbass forgot to clean the pre-intake sponge lmao it was FILTHY
how often should u clean it?
love this canister filter !!
does it has any problem ?
Been using these filters for over 1 year now, no issues at all so far, crystal clear water and pin drop silent, clean them out once every 3/4 months. Value for money I say.
Is it the same for Ultramax 1500 model?
Great, everything done well, would say it would be smart to take a spring brush and push inside the head near impeller (where the red rubbery thing is) to clear the OUT way in the head itself, is collects a lot of filth and is known to reduce flow rate.. 🙂
Подскажите пожалуйста точную длину керамической оси ?
It’s about 2mm can confirm next time I clean it out again 👍