HOW TO: AQUARIUM Auto Top Off and Water Change SYSTEM step by step tutorial.

Поделиться
HTML-код
  • Опубликовано: 13 сен 2024
  • How to: Shrimp tank auto top off and water change system setup. In this video I will share with you a fast and effective method of the water top off system for your shrimp rack allowing you to do shrimp safe water change at the same time....
    Buy me a coffee:
    buymeacoffee.c...
    Become a member:
    / @shrimpmania
    UGF box full set:
    www.ebay.co.uk...
    How to make UGF box from glass:
    • NEW Shrimp Tank Setup ...
    How I built my shrimp rack:
    Part 1: • How to build DIY Aquar...
    Part 2: • DIY Aquarium Rack buil...
    MY LIGHT in shrimp racks:
    • DIY Aquarium Rack buil...
    MY LIGHT in aluminium profiles on top of the tanks:
    • How to breed Pinto fro...
    How I build an aquarium at home:
    • HOW TO: Make Glass Aqu...
    ❤️ Follow me on Facebook: / shrimpmania777
    ❤️ My RUclips channel - / @shrimpmania
    Thanks for watching!
    #aquarium #Shriptank #Autotopoff

Комментарии • 105

  • @SteveHinrichs
    @SteveHinrichs 3 года назад +9

    You just made my weekend, thanks for the shout out. This is genious system. Very simple to build. I see you must have all caridina shrimp. I have both neos and caridinas. I will need to move some tanks around to place them in the same general area to simplify the system. I will be building this system. Thanks again for the shout out, and the great video.

    • @ShrimpMania
      @ShrimpMania  3 года назад +1

      No worries, I'm glad it was helpful! Thank you for an idea for this video my man

  • @RedGalaxyFishbone
    @RedGalaxyFishbone 2 года назад +3

    Oh mate you just gave me something new to do!! I was getting tired of the hard water changes.. seriously I was doing it the hard way… preparing in a Bucket, and doing it in a watering can.. and then messing the substrate up.
    This made my day man! Now I got to order some stuff haha!

    • @ShrimpMania
      @ShrimpMania  2 года назад +1

      I’m glad i can help! It will definitely make your water changes way easier

  • @Shrimpspiration
    @Shrimpspiration 2 года назад +4

    This looks great, would recommend one improvement to it. You can get the auto shutoff water motor for an ro filter, it only turns on when there is loss off pressure jn the pipe. I.e when the float valve is dropped and water is flowing. This will take out the need for a timmer.

  • @is7090
    @is7090 3 года назад +3

    Leaving us to watch you tube while we are watching your you tune video lol

    • @ShrimpMania
      @ShrimpMania  3 года назад +1

      Yes I left you to watch my RUclips video while I watch another RUclips video about someone watch another RUclips video in his video😆😆

  • @zachofalltrades6116
    @zachofalltrades6116 3 года назад +2

    im so glad I found this video I was basically trying to build a system like this but didnt know about the float valve and Im using a wifi smart timer that i can set the time inside the app for the wifi plug not a manual old school one.

  • @shamgrangrezroa1661
    @shamgrangrezroa1661 3 года назад +3

    Use this setup for my shrimp with top reserviour...easier for waterchange...

  • @richardportelli1983
    @richardportelli1983 3 года назад

    excellent video! Awesome that you combine both auto top off and water changes!

  • @sasi8333
    @sasi8333 Год назад

    Genius. Thank you 😊

  • @Mo-nm1el
    @Mo-nm1el 11 дней назад

    can i also use it for only water change? i dont have that much evapuration thats why im asking

  • @afnaanameer9111
    @afnaanameer9111 4 месяца назад

    What is the light bar you are using. Please give exact nsme or specification so we can buy same

  • @jakeduckworth2350
    @jakeduckworth2350 2 года назад

    I love it! Im going to try and copy bro thanks

  • @rsn.d0
    @rsn.d0 3 года назад

    Very informative video!! New subscriber here 🙋🏽🙋🏽😁😁

  • @Wrap971
    @Wrap971 3 года назад

    Thank you !

  • @koentjuh1776
    @koentjuh1776 4 месяца назад

    Hey friend, im currently building the same for my breeding rack. How strong should the pump be? I have 8 tanks with a maximum capacity 12 in the future, 4 tanks are 1.8m heigh, how strong should pump be to reach upper tanks but also not destroy the system if too strong ?

  • @bashivegas5471
    @bashivegas5471 2 года назад +1

    hello I think the auto top off idea is great. I have ordered everything for my 8 aquariums and will assemble and test it on the weekend. How many liters per hour does the small 12v pump deliver?

    • @ShrimpMania
      @ShrimpMania  2 года назад +1

      Im using 300 l/h pumps, if its more powerful id even better

  • @Ak-vh2og
    @Ak-vh2og 7 месяцев назад

    I have a similar set up but my water pump won’t get water to my top tanks for the auto top off on the top shelf??? It’s a 16w 800l/hr pump running 10 tanks?? Does it need a stronger pump??

  • @ItsMuush
    @ItsMuush 3 месяца назад

    do you make your own RO water?

  • @didnthurt4077
    @didnthurt4077 Год назад +1

    I tried to hook up 4 tanks with this auto topoff system and water comes barely out in the first tank. I guess it needs a stronger pump.. the one im using is 150L/hr. Ordered a 1200L/hr pump, hope this will work to get the water to all my tanks.

  • @Ak-vh2og
    @Ak-vh2og 7 месяцев назад

    Did you use this same system in you’re new shrimp room? Or did you do a gravity system because you have more room?

  • @sprucewe
    @sprucewe 7 месяцев назад

    Can you provide more details on the fittings, floating valve, and pumps? The ebay images are too blurry to read the titles.

  • @trevorwoodsmonkeyboy2220
    @trevorwoodsmonkeyboy2220 2 года назад

    Brilliant

  • @HushNinja
    @HushNinja 2 года назад +1

    Hi, how is it not frying the pump motor when the float valve is closed while the pump is still running?
    Or why is it alright for us to restrict the flow? Are these not going to overheat and fry the pump?
    Thanks!

    • @ShrimpMania
      @ShrimpMania  2 года назад +1

      you just need to use timer, 2 motors for 2 hour per day is enough for my setup they never work very hard

  • @JohnJ-ow5hl
    @JohnJ-ow5hl Год назад

    Great Vid like always. This motor at 8:40. Where does the wire connect to? I do not see a plug to the outlet. Could you explain?

    • @ShrimpMania
      @ShrimpMania  Год назад

      It connects to a 12v transformer because this pump is 12 volt

  • @user-tq2sz8lr1p
    @user-tq2sz8lr1p 3 года назад

    Здравствуйте. Решил просто отметиться.😊

    • @ShrimpMania
      @ShrimpMania  3 года назад +1

      Спасибо, рад вас видеть👍

  • @yukimura1sanada
    @yukimura1sanada 3 года назад +2

    Cool system, i might have to give it a go because it's really time consuming to do water change on many tanks. Btw is your girlfriend Thai? I live in Thailand and my wife is Thai. Keep up the good work on your vids 😉

    • @ShrimpMania
      @ShrimpMania  3 года назад

      I remember that my friend, you mentioned it on Mark's chat 😁 What part of Thailand are you based?

    • @yukimura1sanada
      @yukimura1sanada 3 года назад +1

      @@ShrimpMania i live in Bangkok 😃

    • @ShrimpMania
      @ShrimpMania  3 года назад

      @@yukimura1sanada Nice! My brother in law lives in Bangkok, very hot right now over there! you definitely need an auto top off system for your tanks😁

    • @yukimura1sanada
      @yukimura1sanada 3 года назад +1

      @@ShrimpMania that's nice 🙂 indeed very hot, for me top up is twice a week 😂 so yeah very time consuming. Good that know we share a common love for shrimp and เมืองไทย 😃

    • @ShrimpMania
      @ShrimpMania  3 года назад

      🙏🙏🙏

  • @udaydas6291
    @udaydas6291 11 месяцев назад

    Submersible pump is copper based. So submersible pump is not harmful for shrimps?

  • @ihuitseng
    @ihuitseng Год назад

    Hi, what a great tutorial! My question is for the auto top off tube, it goes to the RO reservoir, just the tube or do I need a pump in there for the water to go into the tank? Thank you in advance.

    • @ShrimpMania
      @ShrimpMania  Год назад +1

      You need pump if your reservoir is below your tanks but if above you can just syphon the water without pump.

  • @creamontop6969
    @creamontop6969 3 года назад +1

    I see you are using Glasgarten GH+ minerals&trace. Have you ever tried Reef Crystal, like Instant Ocean(sea salt) for your shrimps ?

    • @ShrimpMania
      @ShrimpMania  3 года назад

      John, I'm using only this salt for years, never used any other product because it works very well for my shrimps.

    • @creamontop6969
      @creamontop6969 3 года назад +1

      @@ShrimpMania Tnx very much for the Info : very mak mak appreciated. Khob khun khrap !

  • @motoglows
    @motoglows Год назад

    does this work for rimmed tanks?

  • @martin0320k
    @martin0320k Год назад

    Thanks for video, what is that clear plastic thing you attached your float switch on called?

  • @gerarldlee
    @gerarldlee Год назад

    Hi there, what about when the water evaporated? Do we put ro water instead of remineralized water? Thanks

    • @ShrimpMania
      @ShrimpMania  Год назад +1

      Yes i have one tank with RO water for topoffs and another with remineralized water for water change

    • @gerarldlee
      @gerarldlee Год назад

      @@ShrimpMania thanks 🙏

  • @zachofalltrades6116
    @zachofalltrades6116 3 года назад

    can you make a list in the comments section i want to do a slow drip water change for my shrimp and fish , i dont like to just pour it in

  • @zodiak2461
    @zodiak2461 Год назад

    if the pump is running and the tank is full will there be a build up of pressure because there is no where the water could go?

    • @ShrimpMania
      @ShrimpMania  Год назад +1

      It's only a small pump It's much pressure

  • @reserrved9183
    @reserrved9183 Год назад

    Where did you get those clear clamps that attach to the float valve?

  • @zachofalltrades6116
    @zachofalltrades6116 3 года назад

    so really you can make this system with one pump and one container and one shut off valve and use the same bucket for water top off an change.

    • @camu7133
      @camu7133 3 года назад

      No I don't think so. Because the top off water is ro water. The water for water change is ro water + shrimp's salt.

  • @DJK6914
    @DJK6914 2 года назад

    Say I have a tank with a TDS of 120. When I have a reservoir of remineralized water how much would my TDS be that's what confuses me. Have the reservoir the same as tank would just double the TDS in tank right ?

    • @ShrimpMania
      @ShrimpMania  2 года назад

      For water topoffs RO water with 0 tds and for water changes same as in tank, in your case 120

  • @bloodyhell3769
    @bloodyhell3769 9 месяцев назад

    whats the difference between the top off and water change water?

    • @ShrimpMania
      @ShrimpMania  9 месяцев назад

      topoff=ro water, water for water change = ro + gh+ (GH 4-6)

    • @KellyZhong-ri3ic
      @KellyZhong-ri3ic 2 месяца назад

      I want to top off water to my shrimp tank but I don’t have ro water may I use distilled water with zero tds or dose the distilled water need to add the remove chlorine & Chloramine into the distilled water to top up the shrimp tank with matter is correct. I new started my shrimp tank again
      ?

  • @pofy6478
    @pofy6478 2 года назад

    surprised that those little pumps can lift the water that high.

  • @saler1423
    @saler1423 2 года назад

    What pump do you use to push water trough RO pipes?

  • @didnthurt4077
    @didnthurt4077 2 года назад

    Is it ok to leave the waterpump in the RO res all times or do you take it out after each use?

    • @ShrimpMania
      @ShrimpMania  2 года назад +1

      I have it on timer for couple hours a day

    • @didnthurt4077
      @didnthurt4077 2 года назад

      @@ShrimpMania When you do waterchange with that system, how do you go about equalizing tds? Do you just add a bit of mineral powder manually into the tanks? Im not sure if over time all the tanks will be same tds/water parameters. Thanks!

  • @lloydmendonca8009
    @lloydmendonca8009 2 года назад

    Hi, your video shows how to top off water but water change manually you have to remove it from the tank and then turn off 1 valve and switch on the other valve. so, if we have to go on vacation its only gonna top off and not water change on its own..

    • @ShrimpMania
      @ShrimpMania  2 года назад

      Yes, correct it's not fully automatic and I still need to drain the water manually and turn the valves. That's fine if you don't change the water for a couple of weeks, just cut on feeding wile you on vacation and your shrimps will be fine. I did it many times

    • @lloydmendonca8009
      @lloydmendonca8009 2 года назад

      @@ShrimpMania what about fishes.. i got a big 344liters tank and almost 100+small nano fishes and shrimps too.. if i go for 3weeks vacation how to cut off feeding

    • @ShrimpMania
      @ShrimpMania  2 года назад

      @@lloydmendonca8009 I don’t know I’m not a fish expert 😄

  • @isarainie4ever
    @isarainie4ever Год назад

    Isn’t this just top off water system? One with RO, one with the shrimp salt but no pump out old water? Anyway, this is still useful for me. Thank you.

    • @ShrimpMania
      @ShrimpMania  Год назад +1

      yes it's not fully automatic you have to drain the water yourself but its the easiest part of it

  • @jlshrimps817
    @jlshrimps817 2 года назад

    Hello, can I ask you, why are you "pump" oxygen in to RO water?

    • @ShrimpMania
      @ShrimpMania  2 года назад

      Pump in RO container is for pumping not for oxygenating

    • @jlshrimps817
      @jlshrimps817 2 года назад

      @@ShrimpMania i mean you put oxygen in to container before you use salt... why?
      Sorry my english is not so good, but i hope you understand me... :'D

  • @pokosal7015
    @pokosal7015 3 года назад +1

    Sir what will happen if the pump keep running while the bubble valve closed ? I mean if I set 2hour run for filling the tank but the water reach it level at time 1h20 ?

    • @ShrimpMania
      @ShrimpMania  3 года назад

      Nothing happened, the pump will be still working until you switch it off, it can run like this for days. This is what happened at 12:19 when I came back to the room after 2 hours and tanks were full and I just switched the pump off.

    • @pokosal7015
      @pokosal7015 3 года назад +1

      @@ShrimpMania thank you sir for your reply .
      I will follow ur video guidance ^^

    • @pokosal7015
      @pokosal7015 3 года назад

      Hello sir,
      I have 1 more question about seachem Purigen, should I use it and put it in my external filter ?
      Is it good for shrimps ? I’m using external filter connect with chiller

    • @ShrimpMania
      @ShrimpMania  3 года назад

      @@pokosal7015 Hello, Yes I've used Purigen quite a lot before when I had canister filters. It helps to reduce nitrates by absorbing all organic matter in the water. You can use it to control NO3 in your tanks, it's safe for shrimps from my experience. I don't use it anymore because it's quite expensive and it takes some time to clean it with the bleach I also stopped using external filters in my tanks only sponge and UGF. Shrimps have a little bioload and if you don't overfeed and you do regular water change to withdraw NO3 you don't rally need it.

    • @pokosal7015
      @pokosal7015 3 года назад

      @@ShrimpMania thank you sir. Does Purigen absorb mineral ? I have some water mineral liquid in hand.

  • @noodles8203
    @noodles8203 Год назад

    What about true top off for evaporation?

    • @ShrimpMania
      @ShrimpMania  Год назад

      What you meant by ‘true’?

    • @noodles8203
      @noodles8203 Год назад

      @@ShrimpMania What you showed was for water change which is great. I've been looking at setting up for evaporation using the systems that have a sensor which turns on the pump when the water level drops. Or just have the timer on the pump to come on for a minture each day.

    • @ShrimpMania
      @ShrimpMania  Год назад

      I don’t think you watched it at all this video is all about

    • @noodles8203
      @noodles8203 Год назад

      @@ShrimpMania Yeah I watched it all. How do you top up evaporation? Your system is good for water changes.

    • @ShrimpMania
      @ShrimpMania  Год назад

      @@noodles8203 watch it again I explained it at 4:07 and 7:39

  • @mr.faiz96
    @mr.faiz96 3 года назад

    How much your temperature tank

  • @liquoricemold4353
    @liquoricemold4353 3 года назад

    Having hard time knowing what he’s saying is he saying planning tape or priming tape or what I need help pls

    • @ShrimpMania
      @ShrimpMania  3 года назад

      Its a tape commonly used by plumbers to put on the thread when they connect pipes

  • @ranjanty
    @ranjanty 6 месяцев назад

    It just doesn't seem practical. You still have to fill the bucket. Also all the tanks have to be the same size unless they each have their own float valve.

    • @ShrimpMania
      @ShrimpMania  6 месяцев назад

      Yes my new setup doesn't require bucket all goes to the drain. I have float valve in al the tanks

    • @Youarat225
      @Youarat225 2 месяца назад

      @@ShrimpManiacan you show me how to make your new set up? Or the inspiration you took? Thanks bro I’ve watched your channel so much recently

    • @ShrimpMania
      @ShrimpMania  Месяц назад

      @@Youarat225 this is the latest update - ruclips.net/video/kfNGQ8usiOo/видео.htmlsi=kqHfgHpB16gNz-DU