I ran a JD 670D and I never had a packer and they cae out fine. The thing is... is that you wheel pack it. Articulate your machine so there is over lap in your tracks and it'll come out fine. A dozer blade on the front of this machine would have helped greatly also.
Don't want to detract from this entertaining video, but soils should be spread more evenly and thinly in lifts and initially compacted with smaller equipment until they obtain a thickness of about 1 meter or 3 feet to avoid potential differential loading and possible bursting of the culvert roof slab.
Dumping on the already leveled material will help with compaction, the trucks wheels have point loading and so should stay away from the concrete culvert. The area above the culvert should be covered with at least an extra 1m. This will aid compaction by weight and any settlement will just reduce the final grading.
Better grease all the articulation points good cause your giving it a good workout ! We call it hogging subgrade that’s where the new blade hand gets sum stick time … Normally you’d say seat time but that wouldn’t be accurate for most
Cara penimbunan yg ngawur. Pd tepi box culvert akan terjd penurunan krn susah dipadatkan atau tdk padat maksimal bila dipadatkan. Shrsnya sejajar dg box culvert ditimbun dg tiap lapis sekitar 40-50 cm dipadatkan barulah searah jalur jalan ditimbun dan diratakan dg grader.
Funny how these countries get equipment like this yet they don’t have a pot to piss in or a window to throw it out off. Caterpillar must be just giving away free equipment all over the world while sticking it to people in other countries. 🤔
At least when he was able to cross the box he could of leveled off what dirt he had as low as possible the wheeled it with front wheel and articulated the frame away from box.
![Eminem - The Death of Slim Shady [Graveyard Album Trailer]](http://i.ytimg.com/vi/vOJD-6vQpXU/mqdefault.jpg)
In my own opinion there's no problem using grader to spread the dirt. But the operator got lot of patients to do the job
I do agree, hell a little skid steer would have been more efficient but sometimes you just gotta use what you got.
@@devioux4082
If only there was a machine of some sort that had a blade at the front instead of the middle.
Yes, they can be bought but of course cost extra.
You use what you have
I’m 15 seconds into this video and wondering why they didn’t use a dozer
Yeah, but when all you got it a grader...
@@orygunguns8521 But would you employ an electrician who only had a hammer.
That crossing will be rough for years due to no compaction.
I ran a JD 670D and I never had a packer and they cae out fine. The thing is... is that you wheel pack it. Articulate your machine so there is over lap in your tracks and it'll come out fine. A dozer blade on the front of this machine would have helped greatly also.
Don't want to detract from this entertaining video, but soils should be spread more evenly and thinly in lifts and initially compacted with smaller equipment until they obtain a thickness of about 1 meter or 3 feet to avoid potential differential loading and possible bursting of the culvert roof slab.
Why didn't the trucks dump the first loads of dirt over the side to start with. Looks like a lot of extra work to me.
Dumping on the already leveled material will help with compaction, the trucks wheels have point loading and so should stay away from the concrete culvert. The area above the culvert should be covered with at least an extra 1m. This will aid compaction by weight and any settlement will just reduce the final grading.
Wie sollen die LKW über diese Betonwand abladen ? Die ist vor der Betonwand tiefer. Also muß ja vorher Aufgefüllt werden.!!
Good driver who is really missing that front push blade. *If you are hanging around with bulldozers you don’t need one.
Why didnt the just backfill around culvert and make a ramp on the other side then the grader can push all the way across
SEMANGAT SOB ,,LANJUTKAN
Bulldozer seems like a smarter option
Way too easy to have the trucks dumpy it on there.
Wow good2 my friend
I have seen graders with a push plate in front. It would Have been handy in this job.
Always enough time to use the wrong tool, never rough time to use the right one…
Deff not a third world issue..
Needed to angle the blade it would pushed it over quickly that way
salam dari Jawa hadir bos
Would have been alot easier I he had a blade on the front we use it all the time
Luar biasa gk ada dozer greder pun di manfaatkan untuk dorong2 tumpukan
Sekil dewa keren mantap
These dudes always walking right in the way 🚶🏾♂️
Better grease all the articulation points good cause your giving it a good workout ! We call it hogging subgrade that’s where the new blade hand gets sum stick time …
Normally you’d say seat time but that wouldn’t be accurate for most
Salam kenal salam kompak selalu bos ,memper mudah pengerjaan
Nice
Mantap kawan
Que falta faz uma pá carregadeira em? Kkk mais é assim mesmo,quem tem cão 🐕 caça com gato 🙀 kkkkkkkk show de bola
Mantap
Salam kenal kawan... melakukan pekerjaan dengan alat yang sesuai akan menjadikan pekerjaansemakin mudah
Another guy that doesn’t know way they have an articulated frame on that grader😭
Fully extended blade and drive parallel with the wall.
Er...wouldn't a bulldozer do a better and quicker job? Way easier. Use the grader for a final grade maybe. Just a thought.
I’m amazed by the comments as if you guys ever been in a third world country.
Wah semangat sllu kwn.
Salam sukse buat anda kawan
Oh what I'd do for a dozer or front end loader. Says the guy on the Grader.
Semoga proyeknya makin lancar bos ku
Ok 💪💪👍
good job
Consumo doppio di energia e tempo
Please is this work in indenosya.?thanks you very mauch
right, this is in Indonesia,
@@idr82 thank's my freinde I' Love indonesia and the peapulle i'see you in good life and your famly
Do what you have to do I guess. Use what you got available to get the job done. Dozer been nice but this beats shoveling lol.
Show meu amigo 👍
Seharusnya yg cocok untuk meratakan atau penimbunan dgn buldozer
Benar bang,,tapi kami tidak disediakan,terpaksa memaksimalkan penggunaan grader,,
@@idr82mengapa tidak ada mesin pemadat seperti vibro karena tanah yg baru diratakan kalo tidak langsung dipadatkan kena hujan jd bubur lagi
Doesn't actually appear to know what he's doing. Blade wrong angle, not extending board out
Not following rules/requirements for lifts and compaction… road will be crappy…
Gasssss.....😍
Salam persaudaraan kawan
Wrong tool for the job. A front blade on the grader, or a bulldozer would have been much more effective.
Cara penimbunan yg ngawur. Pd tepi box culvert akan terjd penurunan krn susah dipadatkan atau tdk padat maksimal bila dipadatkan. Shrsnya sejajar dg box culvert ditimbun dg tiap lapis sekitar 40-50 cm dipadatkan barulah searah jalur jalan ditimbun dan diratakan dg grader.
Apakah anda menonton vidio ini secara utuh saudara?
You can never have too much compaction….
Would've been faster with a rake.
I could have moved more dirt with a shovel than they did in the first 9 minutes. There’s a better way...
A dozer can do it in one minute. This is such a useless heavy machine.
Z…..zzzz
Zero safety of PPE
3rd world shit right here
Funny how these countries get equipment like this yet they don’t have a pot to piss in or a window to throw it out off. Caterpillar must be just giving away free equipment all over the world while sticking it to people in other countries. 🤔
At least when he was able to cross the box he could of leveled off what dirt he had as low as possible the wheeled it with front wheel and articulated the frame away from box.
Seems like wrong machine….waste of fuel using that big grader….