Technics Tape Deck Gear Repairs

Поделиться
HTML-код
  • Опубликовано: 5 дек 2024

Комментарии • 49

  • @KaiConfuzzled
    @KaiConfuzzled 11 месяцев назад

    Great video, thanks for sharing. One thing that tripped me up was deck 2 - getting the frame back on. After watching this video many times I noticed that you move an arm which is to the left. You move it left then the frame slides back on. Good video. Unfortunately the 3 wires going to the head broke away from the solder. I am to re-solder and I think the sequence is yellow red white, moving from the back to the front. Does this sound correct? Thanks

  • @jorgemayorga6934
    @jorgemayorga6934 8 месяцев назад

    Thank for your patient, I have a RS TR 170 with the same problem, where I can obtain information about the proper gear number or ID , ? any information helps, thanks a lot.

  • @chylogurti
    @chylogurti Год назад

    Great video. Would this be the same for a technics rs ch550 please? I have gear and belts problem. I have a spare broken cassette for parts. No ch 550/950/515 videos on YT. Thanks again

  • @574rz460v3
    @574rz460v3 3 месяца назад

    Hi can you link to where I can buy these gears please. Trying to fix my rs x120 and posy my rs x933.many thanks

  • @RockinJohnnyaitken
    @RockinJohnnyaitken 6 месяцев назад

    What type of screwdriver do you need to remove the recording head, I have all sorts but none fit. Is that a flat head one you use? My eyes not as good as they used to be

  • @samste
    @samste  Год назад

    Will be doing several repairs for some friends in the near future, hopefully the video repairs will be as least good or better, as they have some old units that have cogs gone and the tape is winding out or not playing

    • @samste
      @samste  6 месяцев назад

      Hi, just use a small phillips head screwdriver precison screwdriver set the black handle is the small flat heat, ive got some more to do soon when i have a chance and some spare time, i will upload the repairs.

  • @ДенисБербенцев
    @ДенисБербенцев Год назад

    Нормально конечно все разбирать и ремонтировать одной плоской, самой дешевой, китайской отверткой, вместо профессионального набора для обслуживания такой техники. Супер, так и дальше делай! 5+

    • @samste
      @samste  Год назад

      Возможно, когда я смогу себе это позволить, я куплю себе несколько профессиональных отверток, спасибо.

  • @FrankDens
    @FrankDens 10 месяцев назад

    I have a Technics RS-TR232 can you help me for the gears if to print myself thank you

  • @mariusitalianu3877
    @mariusitalianu3877 3 года назад

    hello samste tell me please after you got rid of those wheels you put on the mechanics that I have a deck like yours

  • @jorge195501
    @jorge195501 2 года назад +1

    Thank you for your video, very good. Do you know where I can get those gear ?

    • @samste
      @samste  2 года назад +1

      not sure where to buy but if i have a few to spare i will post up on ebay and post here that theres some for sale.

    • @Schneewittchensarg
      @Schneewittchensarg 2 года назад +4

      The gear is called RDG5772ZC, you can find it on ebay.

  • @FrankDens
    @FrankDens 10 месяцев назад

    Hi good video but what I wanted to ask can I also print it myself do you have a file for me for this or where I can find it thanks in advance

  • @jackturtle131
    @jackturtle131 3 года назад

    May I ask if the problem was unable to play ??? as mine does fast forward and reverse

  • @jozseflaszlo6440
    @jozseflaszlo6440 3 года назад

    Hello! please help with technics rs-tr 212 where can i get it ??

  • @RealSmartHawk
    @RealSmartHawk 4 года назад +1

    where did you buy these gears from? some help please. part RDG5772ZC

    • @BABYGODZILLA2009
      @BABYGODZILLA2009 3 года назад

      The originals are not available anymore. You can buy the 3D printed ones. Not sure how good they are or how reliable they are, but that the only option there is right now. Here is the link www.ebay.com/itm/Technics-Panasonic-RDG5772ZC-Gear-/254323664112

    • @makeshift202
      @makeshift202 3 года назад

      I bought these from Poland www.ebay.com/itm/2-GEARS-PANASONIC-TECHNICS-RDG5772ZC-list-of-models-in-the-description/392978026044?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649. I'm in Australia and they arrived in 1 week. Installed today and my Technics RS-X120 is now working prefectly.

  • @KimGamingPH
    @KimGamingPH 4 года назад +1

    I have the same deck, I was able the replace the gear on deck 1, but on deck 2 the screw on the tapehead won't budge, I damage the screw and now I cant take out the tapehead on deck 2. I hope you guys won't make the same mistake I did.

    • @Schneewittchensarg
      @Schneewittchensarg 2 года назад

      Make shur to use your best fitting screwdriver when unscrewing stuck screws. I almost did the same thing. Now you have to drill away the screw, and that is difficult.

    • @KaiConfuzzled
      @KaiConfuzzled 11 месяцев назад

      This happened to me. Job was almost over. Cut a piece of rubber glove and wrapped around screwdriver head. Managed to get screw out. Used replacement screw from my 'box of bits' from my Tamiya Monster Beetle RC car.

  • @bca321rafael
    @bca321rafael 3 года назад +1

    Amigo gracias por tu video ha sido de mucha ayuda para mi y supongo a otros tambien, gracias .Yo cometi el herror de sacar los plot de los conectores para trabajar esto desde fuera antes de ver tu video claro. ahora es terriblemente problematico volver a ponerlos en su lugar, hay alguna herramienta especifica para este objetivo?

  • @kappino
    @kappino 3 года назад

    Can you please tell me what are the effect of these broken gears ? I have a Technics RS TR212 with some issues but how to know that cames from these gears? 🤔

    • @makeshift202
      @makeshift202 3 года назад +1

      For me it was forward take up real not working. So I have an RS-X120, deck 1 which is forward only would rewind and fast forward but would only play for like 1 second. Deck 2 same thing but worked fine in reverse mode. i ordered these gears from www.ebay.com/itm/2-GEARS-PANASONIC-TECHNICS-RDG5772ZC-list-of-models-in-the-description/392978026044?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649 and installed today. Both decks now working perfectly. Cheers from Australia!

    • @kappino
      @kappino 3 года назад

      @@makeshift202 thanks Daniel! I think I’ll fix my problem too since my deck does almost the same as yours 👍🏻

    • @makeshift202
      @makeshift202 3 года назад

      @@kappino Good luck mate. Also make sure you take careful note of that spring as shown in the video and put it back as it was. I screwed up the first time and the plastic thing was on the wrong side. You'll see what i mean.

    • @ralphexwhyzee8168
      @ralphexwhyzee8168 2 года назад

      @@makeshift202 hi, and greeting from Canada to the land down under , I have a st tr155 technics that is doing the very same thing you’re talking about but up on inspecting the gear, it was not damaged or broken but I noticed it was made of a soft type of plastic so I guess the question is do you think if I change that exact gear it will fix that problem ? Thanks mate!

  • @pradippathak2492
    @pradippathak2492 4 года назад

    I have Technics Double Casstte deck RS 575 (Mark2) which has same Plastic gear problem. I want to change the gear, can you help me to arrange plastic gear set for both side. I am from India.

  • @ximresal
    @ximresal 4 года назад +2

    Me fue de mucha ayuda para desarmar mi deck technics

  • @giovannymunoz3743
    @giovannymunoz3743 2 года назад

    Tengo la deck RS-232 y tiene el engranaje que uated esta cambiando ..donde lo puedo conseguir.. Aca en colombia

  • @benzyblenaru9602
    @benzyblenaru9602 3 года назад

    Where do you buy the new parts?

    • @jettrex9287
      @jettrex9287 3 года назад

      not sure if you guys gives a damn but if you're bored like me during the covid times then you can watch all of the latest movies and series on instaflixxer. Have been binge watching with my gf for the last few months =)

    • @marcelobodhi1692
      @marcelobodhi1692 3 года назад

      @Jett Rex definitely, have been using instaflixxer for months myself =)

    • @eastoncolten6666
      @eastoncolten6666 3 года назад

      @Jett Rex Definitely, I have been watching on instaflixxer for months myself :D

  • @robertfrancisgomes7031
    @robertfrancisgomes7031 Год назад

    How to repair the play pully # 1D0011ZB of this mechanisium.

  • @antochavez4768
    @antochavez4768 3 года назад +1

    Donde se consigue engranajes para deck 373 en peru no hay

  • @neagufelix971
    @neagufelix971 3 года назад

    Where did you buy the gears?

    • @BABYGODZILLA2009
      @BABYGODZILLA2009 3 года назад

      The originals are not available anymore. You can buy the 3D printed ones. Not sure how good they are or how reliable they are, but that the only option there is right now. Here is the link www.ebay.com/itm/Technics-Panasonic-RDG5772ZC-Gear-/254323664112

    • @成興桃
      @成興桃 2 года назад

      Buy a old and same model deck take the part from inside for repair

  • @DhakaMusicOmar
    @DhakaMusicOmar Год назад

    that was good but the shadow was really bothering me.

    • @samste
      @samste  Год назад

      Im sorry it bothered you maybe someone else on youtube may have a better video of the repair, i do this as a hobby i am not a professional at repairing stereos, just thought i would help someone else out there trying to do the same thing, thankyou

  • @albertocabezas282
    @albertocabezas282 4 года назад

    Oh... those maligned gears made of cheese

  • @Tfuoitffghyu
    @Tfuoitffghyu 6 месяцев назад

    И че? 😂