Great demostración, my understanding is the .004 in is max warped allow to be serviced, when ithas .005 " the cylinder head neeeds to be replaced,can not be machined.
I’m surprised that some technicians rely on the block test liquid instead of using a pressure transducer in the cooking system. Sure, the transducer is pricey but the time savings on the diag will have the sensor pay for itself in no time at all. Sorry that you had to deal with the bent pin, but at least she didn’t snap off! Another A+ video, Sadel. Enjoy the holiday with the family!
Excellent diagnosis Sadel! A lot of good information in this video! I use pulse sensors when I check cooling system, and I was thinking how my tool would have reacted with your symptom. Like the RC! Thank you for Sharing, Sadel! This was a good one!
great video. i'm curious to know if the over-heating was the root cause of the valvetronic motor burning out... but other broken plastics looks to be normal running temp unless you sold them modified low thermostat which should be on all cars that get serviced.
Gonna try this my 528i doesn’t the same cranks no start originally thought it was timing chain I sent the car to multiple shops no can figure out why it’s not starting but I noticed the same sound from the valvetronic so I’m hoping this will help and solve my problem 🤞🏾
i have a car bmw 2.0 turbo engine where valve tronic code was on but then computer shut down the power supply to the valve tronic was not there bucause pcm trying to protect the engine so valve tronic dose not bent the valve it was crank no start and crank was very light almost like bent valve or some thing
Long vacation needed after this one!
Agreed
At least 1 😂 month
Great demostración, my understanding is the .004 in is max warped allow to be serviced, when ithas .005 " the cylinder head neeeds to be replaced,can not be machined.
Thank you, and yes sometimes if too warped needs replaced
I’m surprised that some technicians rely on the block test liquid instead of using a pressure transducer in the cooking system. Sure, the transducer is pricey but the time savings on the diag will have the sensor pay for itself in no time at all. Sorry that you had to deal with the bent pin, but at least she didn’t snap off!
Another A+ video, Sadel. Enjoy the holiday with the family!
Thanks and i did get lucky
Great video... thank you so much for making/sharing these.
Glad you enjoyed it!
Excellent diagnosis Sadel! A lot of good information in this video! I use pulse sensors when I check cooling system, and I was thinking how my tool would have reacted with your symptom. Like the RC! Thank you for Sharing, Sadel! This was a good one!
It was definitely a tough one
Great work and explanation! I have that Launch also, pretty good tool.
Thanks for watching and that scanner is pretty useful
Looks like a nice gravy job nice job this was a good one.
it's not too bad,
Wonderful video thanks for sharing
Glad you enjoyed it
SIEMPRE a prendo algo nuevo contigo eres tremendo professional que passes un Buen fin de Semana
Gracias!
great video. i'm curious to know if the over-heating was the root cause of the valvetronic motor burning out... but other broken plastics looks to be normal running temp unless you sold them modified low thermostat which should be on all cars that get serviced.
No the valvetronic just fails like this very common.
Gonna try this my 528i doesn’t the same cranks no start originally thought it was timing chain I sent the car to multiple shops no can figure out why it’s not starting but I noticed the same sound from the valvetronic so I’m hoping this will help and solve my problem 🤞🏾
Good work 💪 as usual..! What happens if over phazed head is installed on to BMW . Will there be fuel trim issues..?
Shouldn't
Nice👍🏾👍🏾👍🏾 saludos desde Perú😊
👍
22:28 Engine block are aluminium too, probably same procedure has to be done on it, because is over heated...true?
yes, it's good practice to check the block the same way, almost all the time the block doesn't warp from what I have seen and experienced.
@@DTEAuto My one was...3 tents of mm. in the midle...Volvo 2.0 20v 850 glt.
what reasons besides coolant could cause high compression in a cylinder?
stuck closed exhaust valve on a companion cylinder
what scanner are you using here ?
ruclips.net/video/Nb_LLsDxYFI/видео.html
Launch x431 Pro TT
i have a car bmw 2.0 turbo engine where valve tronic code was on but then computer shut down the power supply to the valve tronic was not there bucause pcm trying to protect the engine so valve tronic dose not bent the valve it was crank no start and crank was very light almost like bent valve or some thing
I honestly have yet to run into a situation where the valves get bent on the N20
It will have problem soon whith this warpage 😢
why and what kind...
@@DTEAuto because it's a turbo it will blow the head gasket