Great video. The length of the video is perfect. Detailed, educational and informative even to someone who has cut these corners over a thousand times. I could never get that perfect corner until today. Thank you.
Finely I found something that makes sense for me as a beginner! I truly appreciate your video, specifically after watching so many, that was not detailed as tours.
Message to my three sons ... My awesome grandma Annie Wilkie used to say, "Any job worth doing, is worth doing right." Look at how much care and detail this young man puts into preparing an outside kick plate metal corner (and making an educational video about it). Impressive. An unsung hero. Good for him. If politicians cared this much, we'd have a much better world.
Yes it’s very long and quit redundant I made it that way for a base video for my crew to learn and use a lot of information in this video for future videos that will be much more condensed than this. Thank you for watching and for the feedback!
Thank you! Meticulous to a fault. Painfully slow descriptions but clear and concise. This was just the video I was looking for when I go to flash my edge trim with my wall trim on a roof cupola on a 12/12 pitch roof. Now I can practice on some pieces. Not sure I will need to mitre in the 1/2 inch tips of the corner but if I can it will be solid. If you could happen to remember to remove your shadow that would be the gold medal! Thank you again so much.
Thank you for the feed back yes very slow I made this for my crew to learn from so slow and concise was the goal. I am working on getting some filming equipment to make better videos in the future just have my phone for now unfortunately.
Dude, at first i thougt the video was to long, but then i tried it myself and i had a Hard time keeping up, Lucky me the pausebutton exists! Thanks! This really helped my projekt! /Dennis in Sweden
Awesome I’m glad you found it helpful! Yes it is longer than I would like for sure but I plan on referring to a lot of steps in it on future videos and it will help me keep new videos shorter.
Hey Slacker, how bout posting a few more of expert videos. You are so good at teaching. Would like to see more how to videos from you.... please pretty please...
Thank you! I will definitely be posting more videos as soon as I can. I’ve been attending a 6month school and have been swamped with class and homework please hang in there and I WILL be making more videos next one is going to be rake and eave trim.
@@1636patriot yes there is lots of different types of trim this video is meant to provide a basic understanding of trim cuts and bends I will be making various different videos on different types soon
Best Video I’ve seen. Learned a lot. Do more for J flashing inside and out.
Great video. The length of the video is perfect. Detailed, educational and informative even to someone who has cut these corners over a thousand times. I could never get that perfect corner until today. Thank you.
Finely I found something that makes sense for me as a beginner! I truly appreciate your video, specifically after watching so many, that was not detailed as tours.
The best video on these corners I've seen yet !! great job thank you for your detail and commentary
chuck
Thank you for your support chuck! I’ll be making more trim videos soon.
The best end wall trim video known to modern civilization! Thank you for the upload!
Hahaha thank you I will be making more videos like this in the future
Excellent tutorial! Thanks for posting, definitely feels good to get it right!
Message to my three sons ...
My awesome grandma Annie Wilkie used to say, "Any job worth doing, is worth doing right."
Look at how much care and detail this young man puts into preparing an outside kick plate metal corner (and making an educational video about it).
Impressive. An unsung hero. Good for him.
If politicians cared this much, we'd have a much better world.
@@jeffchapman8992 thank you so much sir.
Useful but very very long video good Lord
Yes it’s very long and quit redundant I made it that way for a base video for my crew to learn and use a lot of information in this video for future videos that will be much more condensed than this. Thank you for watching and for the feedback!
Thank you so much for making this video. Very much appreciate the low speed and details.
Thank you for the support! I’m working on making more videos in the future just been pre occupied lately with school. I’ll be back at it soon though
"The best video on these corners I've seen yet !! great job thank you for your patience; Patrick P
Thank you for your feed back glad you found it helpful I’ll be making more soon
Excellent video and I’m impressed how you didn’t rush through it! Perfect!
I'm glad I found this. I was looking for a good way to fit those corners together right
Awesome I’m glad you found my video helpful! This method ensures a tight fit with out the need of pop rivets.
Thank you! Meticulous to a fault. Painfully slow descriptions but clear and concise. This was just the video I was looking for when I go to flash my edge trim with my wall trim on a roof cupola on a 12/12 pitch roof. Now I can practice on some pieces. Not sure I will need to mitre in the 1/2 inch tips of the corner but if I can it will be solid. If you could happen to remember to remove your shadow that would be the gold medal! Thank you again so much.
Thank you for the feed back yes very slow I made this for my crew to learn from so slow and concise was the goal. I am working on getting some filming equipment to make better videos in the future just have my phone for now unfortunately.
Dude, at first i thougt the video was to long, but then i tried it myself and i had a Hard time keeping up, Lucky me the pausebutton exists! Thanks! This really helped my projekt! /Dennis in Sweden
Awesome I’m glad you found it helpful! Yes it is longer than I would like for sure but I plan on referring to a lot of steps in it on future videos and it will help me keep new videos shorter.
Hey Slacker, how bout posting a few more of expert videos. You are so good at teaching. Would like to see more how to videos from you.... please pretty please...
Thank you! I will definitely be posting more videos as soon as I can. I’ve been attending a 6month school and have been swamped with class and homework please hang in there and I WILL be making more videos next one is going to be rake and eave trim.
Hey Broly. Awesome video mate. Can you make a video for how you do an internal corner ?
Yes I can
Very nice
Great help! Thanks a lot!
You saved me thank you
Awesome I’m glad to hear you found my video helpful!
Other trainers should be flogged and shamed for their incompetence and all their income funneled to this guy. Practice makes Plump Paychecks. Thanks
Thank you I’m glad you liked the video
The bottom of my trim bends in not out
@@1636patriot yes there is lots of different types of trim this video is meant to provide a basic understanding of trim cuts and bends I will be making various different videos on different types soon