I got them off Amazon. I looked through my order history in Amazon but it's been years since I ordered everything and couldn't find the listings anymore
So tour center wire was the white one? I just made one of these panels for the first time yesterday and kinda skipped a little but of your video at first but realized you had used the red wires and took the white ones out. The relays i bought the red wire was the middle one so i was confused for a minute
Agreed, Heat Shrink and removing the white wires instead of just cutting them like that. They also make 4 pin relays so that you don't have to deal with the extra unused wire. In any case, excellent video and good content. Keep them coming!
www.ebay.com/itm/12-Way-Blade-Fuse-Box-Block-Holder-LED-Indicator-32V-12V-Auto-Marine-Waterproof-/185120948927?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0 www.ebay.com/itm/5X-Dual-Row-12Positions-Screw-Terminal-Electric-Barrier-Strip-Block-600V-15A-USA-/143663127125?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0 www.ebay.com/itm/10-PACK-Car-30A-40-AMP-Relay-Automotive-Harness-Socket-5-Wires-SPDT-5-Pin-DC-12V-/253042709287?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0 Idk any of these sellers but these are the basic parts
Might be neater if you connect the relay at the bottom to the outside terminals and work to the center of the terminal strip as you move up the relays. That way the short wires at the bottom are not crossing the long wires. Just a thought. And now that I watched to the end of video I see the second side was wired in that fashion...You could just change the numbering of the relays starting at the bottom and go 1-5 up and the other side 6-10 from top to bottom. Seems fine the way you did it, I'm looking at various setups for these trying to figure out how I want to build one.
I find it kind of sad that nobody seems to go down to their local motor factors to get the parts for their projects..The knowledge that can be gained from a good face to face transaction can’t be beat
Not sure what you watched, but considering the amount of work put into it and how clean it came out, would call that a very professional looking relay panel.
I am pretty sure that you are a moron and have never done any work like this. It is a good video with details and I would love to see what you could come up with? Post some of your work or shut the f&*k up.
Incredibly Helpful Video!
I stumbled upon this video at just the right time, and I can't emphasize enough how much it's helped me.
Nice job. I'm getting you a set of drill bits for Christmas. LOL
Lol. I don't think I've had a good set of drill bits in over a decade
Very good explanation. Thank you for taking the time
Glad it was helpful!
Nice job there 👍. Can you share the link of what you used? I liked the long cable relays you used
I got them off Amazon. I looked through my order history in Amazon but it's been years since I ordered everything and couldn't find the listings anymore
@@turbojeremy13 got it, thank you!!
I need it 😂😂😂 too
So tour center wire was the white one? I just made one of these panels for the first time yesterday and kinda skipped a little but of your video at first but realized you had used the red wires and took the white ones out. The relays i bought the red wire was the middle one so i was confused for a minute
Yes that's correct
The center wire is the white wire on the relays I used.
Nice job. I would like to see some shrink wrap on the terminals and to not cut of the wire like you did. It should be removed.
Agreed, Heat Shrink and removing the white wires instead of just cutting them like that. They also make 4 pin relays so that you don't have to deal with the extra unused wire. In any case, excellent video and good content. Keep them coming!
Thanks for the tip!
Hey, I liked your video, do you have any links to the products you used? Thanks
www.ebay.com/itm/12-Way-Blade-Fuse-Box-Block-Holder-LED-Indicator-32V-12V-Auto-Marine-Waterproof-/185120948927?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0
www.ebay.com/itm/5X-Dual-Row-12Positions-Screw-Terminal-Electric-Barrier-Strip-Block-600V-15A-USA-/143663127125?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0
www.ebay.com/itm/10-PACK-Car-30A-40-AMP-Relay-Automotive-Harness-Socket-5-Wires-SPDT-5-Pin-DC-12V-/253042709287?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0
Idk any of these sellers but these are the basic parts
Nice job ! Do you have a link for the relays . looks like they are generous with the lead lengths .. !
It's been so long I don't remember exactly where they came from. It was either ebay or Amazon
@@turbojeremy13 Thanks
Might be neater if you connect the relay at the bottom to the outside terminals and work to the center of the terminal strip as you move up the relays. That way the short wires at the bottom are not crossing the long wires. Just a thought. And now that I watched to the end of video I see the second side was wired in that fashion...You could just change the numbering of the relays starting at the bottom and go 1-5 up and the other side 6-10 from top to bottom. Seems fine the way you did it, I'm looking at various setups for these trying to figure out how I want to build one.
I find it kind of sad that nobody seems to go down to their local motor factors to get the parts for their projects..The knowledge that can be gained from a good face to face transaction can’t be beat
Motor factors?
@tommulcahy6075
If you mean local auto parts store, most know nothing.
Auto parts stores aren't the same as they used to be
@@jasonsam5952 Yup, most of the time nowadays the customer knows way more than the teenager running he register.
What type of wire strippers are those? Send me a link to them on Amazon if you can. I want to grab me a pair of those.
www.amazon.com/dp/B01018CVM0/ref=cm_sw_r_apan_glt_fabc_5ZW219W6X6G5KTRKYD97
These are the exact same ones but same style
You waste a lot of time picking tools up, if you do all the crimping in one go then you screw them all down at once it saves time.
I think a step bit would have been very useful and fast here
Absolutely, I just can't ever keep track of where I set them down lol
i did`t see any professional fuse in your video !! you taken more than 12 min to make a mark in the board
Not sure what you watched, but considering the amount of work put into it and how clean it came out, would call that a very professional looking relay panel.
I am pretty sure that you are a moron and have never done any work like this. It is a good video with details and I would love to see what you could come up with? Post some of your work or shut the f&*k up.
3:40 - First "mark in the board"... 🤷♂️