So informative thanks sir. Please explain the function of bypass valve and how to maintain delta t..? And explain different chiller particle issues ...
Hey, You have mentioned the wrong Flow direction in 0:48. But if it is correct then in the later video when you are giving an example of temp. 1:18 If water is flown into the chiller the temp. should be 54.6deg F and if water is going out from the chiller it should be 42.4deg F i.e. chilled water going to AHUs. Please let me know if i am correct. Waiting for your response.
TR is rate of heat transfer and GPM in rate of water flow. So we can't compare these both values. And we have derived this formula clearly in a separate video. The link for the video is below. Chiller Load Calculation Breakdown ruclips.net/video/FSt7A4vYUWw/видео.htmlsi=B1cMVHko79OvMG6e
I like it, a simple way to understand the basics
Thanks Sir for uploading this video, I learn alot from your videos 😊
It's my pleasure ❤️
ruclips.net/video/Do9qHCRcwaY/видео.htmlsi=u6zBXU0Ka-vihwxy
ruclips.net/video/KQEh6t7pdCw/видео.htmlsi=vg_B1ADUoqk6iHOB
Very informative video 👍👍👍
Thanks a lot ❤️
ruclips.net/video/KQEh6t7pdCw/видео.htmlsi=vg_B1ADUoqk6iHOB
Thanks a lot for this video.. anyone can’t explain to us like you 😊
My pleasure 😊
Informative video. How to calculate the inlet & outlet temperature of chilled water.
ruclips.net/video/jzi4sGJo1iM/видео.htmlsi=sPorzbekrf3FvrL4
So informative thanks sir.
Please explain the function of bypass valve and how to maintain delta t..?
And explain different chiller particle issues ...
ruclips.net/video/KQEh6t7pdCw/видео.htmlsi=vg_B1ADUoqk6iHOB
Thank you sir for your information 🙏
Always welcome 😊
Hello thank you for the good video and why we divide it with 24? Could you please know me. Is it for 24 hrs?
Yeah, I will explain it in a separate video.
Hi Thank you and you efforts are much useful to the learners like me.
@@vikrambabu4720 Happy to help always 😊
ruclips.net/video/KQEh6t7pdCw/видео.htmlsi=vg_B1ADUoqk6iHOB
Primary pump and secondary pump video apply
The video making is in the process. Will upload soon.
அருமையான பதிவு, நன்றி.
மிக்க நன்றி.
ruclips.net/video/KQEh6t7pdCw/видео.htmlsi=vg_B1ADUoqk6iHOB
Hey,
You have mentioned the wrong Flow direction in 0:48. But if it is correct then in the later video when you are giving an example of temp. 1:18 If water is flown into the chiller the temp. should be 54.6deg F and if water is going out from the chiller it should be 42.4deg F i.e. chilled water going to AHUs.
Please let me know if i am correct.
Waiting for your response.
ruclips.net/video/KQEh6t7pdCw/видео.htmlsi=vg_B1ADUoqk6iHOB
Explain hot gas bypass
Sorry for late reply. I will make it soon.
ruclips.net/video/KQEh6t7pdCw/видео.htmlsi=vg_B1ADUoqk6iHOB
Can pls make video cooling tower parameter tds,ph,condtivity,ect
ruclips.net/video/KQEh6t7pdCw/видео.htmlsi=vg_B1ADUoqk6iHOB
Why we take 2867 gpm and gpm 2867 number constant for any tr caliculation of chiller
No, that is the water flow rate. We used that value for an example. The value will vary based on the flow rate.
How do u derive 12.1 multiplying factor?
12.1??? 12.2°F???
good day sir,please explain what is 24?
ruclips.net/video/Do9qHCRcwaY/видео.htmlsi=u6zBXU0Ka-vihwxy
Hi what will be the District Cooling plant load requirement for 20000TR
ruclips.net/video/KQEh6t7pdCw/видео.htmlsi=vg_B1ADUoqk6iHOB
The calculation of ∆T is from condensor, righ? Can we calculate ∆T from evaporator too?
ruclips.net/video/KQEh6t7pdCw/видео.htmlsi=vg_B1ADUoqk6iHOB
Hello, can you send me a link to the simulation program for cooling and heating systems?
ruclips.net/video/KQEh6t7pdCw/видео.htmlsi=vg_B1ADUoqk6iHOB
How we know the water flow rate
You can check that from the meter which is connected in the pipeline or in the BTU meter.
How to know gpm how can you Add 2000 Tr is 2867 gpm please explain sir
GPM you can know from the water flow meter. All chiller plant is installed with a water flow meter.
526.5 kwh
Please reply
Good...👍
1TR=2.4 gpm not applicable here 2867 divided by 2.4 should be the load on chiller approximately
TR is rate of heat transfer and GPM in rate of water flow. So we can't compare these both values. And we have derived this formula clearly in a separate video.
The link for the video is below.
Chiller Load Calculation Breakdown
ruclips.net/video/FSt7A4vYUWw/видео.htmlsi=B1cMVHko79OvMG6e
Sir what is 24 ?
24 means hr.
I have explained about 24 in the below video. Please watch. Thank you.
ruclips.net/video/FSt7A4vYUWw/видео.html
@@zebralearningsenglish-pn6fl Thank you very much sir
What is 12.5
ruclips.net/video/KQEh6t7pdCw/видео.htmlsi=vg_B1ADUoqk6iHOB
Please update video in Tamil
Please
Yeah sure, I will upload soon.
In this formula how do i get flow rate ( gpm ?
The flow rate you can get from the meter installed in the pipeline.