You can right click on project name and choose properties then you will see Lock Project with Password then you choose Enable and input new password and confirm the new password and finally you can press OK. That it Please make sure you have back up those project before do.
I 'm from Indonesia.....thank you so much bother, i try to remember again this ladder programming in 1993 ago, when for the first time still using LM90 (logic master 90) connected to PLC GE 90-30 and GE HMI interface name "Cimplicity" ....., we need like this supplements again....thanks a lots brother..👍👌...
Dear Sir. I once wrote a loop in 1996 on a GE PLC that did a PID (in Code) for a VSD with positioning on a Dancing Roller. The logic worked flawlessly. Obviously had the analogue inputs etc?
I have problem with PLC series 90-30 , The PLC CPU 364 corrupted and i replace it with CPU372 .but CPU372 not supported with LogicMaster 90-30 ,so I used Proficy Machine Edition but the PWR supply PWR321, and it give me fault so i replace it with PWR330 in software but in real it's the same, the plc work but there two module ALG442 not work and i can't read from them , so what is the problem , and how i can fix it ? Thank you
@@generaltechnologyknowledge5165 function do have this feature under inspector view which will allow you to perform lock or not, I am curious that how you can unlock if this is a case. any alternative solution?
Excuse me i have a question, how is the process if you want to modify a parameter for example i have a timer, and the time is 10 secs i want to move to 5 seconds
Dear sir, You can use MOVE_INT and create new variable then you can create the logic move 10 to new variable and also move 5 to new variable. Finally you can take the new variable that moved to PT of timer. I hope it work. Thanks
I have ic200cpu001-LK series, so which ge intelligent platforms controller i will select. please let me know, i'''m using proficy machine edition 7.0. And one more thing can any one give me the proficy machine edition 7.0 key please. PLEASE HELP ME.
Dear Sir, You can do it by 1. Right on target 2. Click Go Online 3. Click Programmer Mode 4. Right click on point that you want to force 5. Click Force ON, OFF or Remove force Or you can Toggle point by press F12. Thanks you
How do I put a password to prevent settings to be changed?
You can right click on project name and choose properties then you will see Lock Project with Password then you choose Enable and input new password and confirm the new password and finally you can press OK.
That it
Please make sure you have back up those project before do.
These videos are so helpful! I'm currently working on a CPE305 and have never worked with GE before. Thanks so much!
Ok you can try step by step
thank you so much, keep going please
we need these videos because we are new in this plc world
Thanks you so much sir,
We will go step by step.
I 'm from Indonesia.....thank you so much bother, i try to remember again this ladder programming in 1993 ago, when for the first time still using LM90 (logic master 90) connected to PLC GE 90-30 and GE HMI interface name "Cimplicity" ....., we need like this supplements again....thanks a lots brother..👍👌...
Thanks you so much sir,
I will try to show and share more video that related to proficy machine edition and proficy cimplicity.
Hi can someone help me download proficy machine edition 7.0 I need it to practice I would be grateful
Dear Sir. I once wrote a loop in 1996 on a GE PLC that did a PID (in Code) for a VSD with positioning on a Dancing Roller. The logic worked flawlessly. Obviously had the analogue inputs etc?
Thank you for the video, can you make a video with (shiftl word, move int, bit set word) ? thank you
Dear sir,
Ok I will do it in the next video.
Thanks you so much sir.
Thank you
I have problem with PLC series 90-30 , The PLC CPU 364 corrupted and i replace it with CPU372 .but CPU372 not supported with LogicMaster 90-30 ,so I used Proficy Machine Edition but the PWR supply PWR321, and it give me fault so i replace it with PWR330 in software but in real it's the same, the plc work but there two module ALG442 not work and i can't read from them , so what is the problem , and how i can fix it ?
Thank you
Hello brother we are using an old version of versamax ic200cpu00HG. This is obsolete. Can we use any other latest version instead of it?
Hi may I know how you are dealing with function if it did lock, anyway to unlock it?
I don't understand what you mean!
Please detail thanks!
@@generaltechnologyknowledge5165 function do have this feature under inspector view which will allow you to perform lock or not, I am curious that how you can unlock if this is a case. any alternative solution?
Excuse me i have a question, how is the process if you want to modify a parameter for example i have a timer, and the time is 10 secs i want to move to 5 seconds
Dear sir,
You can use MOVE_INT and create new variable then you can create the logic move 10 to new variable and also move 5 to new variable. Finally you can take the new variable that moved to PT of timer.
I hope it work.
Thanks
Thx, where is your part 2 video? Pls link in description next part link and previous part
Thanks sir,
Ok I will drop it!
Anyways please go to playlist because I already collected it.
Thanks
I have ic200cpu001-LK series, so which ge intelligent platforms controller i will select. please let me know, i'''m using proficy machine edition 7.0.
And one more thing can any one give me the proficy machine edition 7.0 key please.
PLEASE HELP ME.
Hi sir...why I can't force the inputs and output?please help me
Dear Sir,
You can do it by
1. Right on target
2. Click Go Online
3. Click Programmer Mode
4. Right click on point that you want to force
5. Click Force ON, OFF or Remove force
Or you can Toggle point by press F12.
Thanks you
@@generaltechnologyknowledge5165 I can't force On and Off input neither output.Do u hv email? I can send you the pic.
@@generaltechnologyknowledge5165 I need your help btw I'm using version 7
I'm using series 90 micro
Hi can someone help me download proficy machine edition 7.0 I need it to practice I would be grateful
How to make programming without plc in profecy machine edition
How to download this software ?
How to install software
If you have software go to install or set up double click it
How to reset plc scada
Please give me the exact question!
Can u help?