Cool multicolor 3D Print TimeLapses and Hictop D3 Hero Review (octolapse)
HTML-код
- Опубликовано: 12 дек 2019
- Buy the best budget 3D Printer of 2023 here: bit.ly/3oKdmpq (affiliate link) Here are some 3D Print TimeLapses / Octolapses off the Hictop D3 Hero as well as some of my thoughts on the machine. A 3d printer with two independant direct drive extruders and a large print volume! This printer has earned a permanent spot on my workbench due to its ability to print flexible materials with great results and multicolor prints with only the need for an ooze shield and not a purge tower.
You can follow me on social media and see what i'm printing and some behind the scenes stuff here:
instagram / wildrosebuilds
twitter / wildrosebuilds
twitch / wildrosebuilds
Models
Question block planter :www.thingiverse.com/thing:223...
Abra: www.myminifactory.com/object/...
Cat in box: www.thingiverse.com/thing:269...
panda / 2 color grizzly bear?: www.thingiverse.com/thing:640831
**Full disclosure: hictop sent me this printer in exchange for my honest opinion / review of the machine.
#3dprinting #3dprinter #pokemon 
Наука
What machines are you guys interested in? what was your favorite print from this episode?
Don't forget to follow me on instagram for some behind the scenes stuff! instagram.com/wildrosebuilds
They should pay you. Imagine what it would cost to have an ad made with octolapses like this.
haha yeah i wish! but then i probably wouldn't be able to share any of the negative aspects of the machines, although this one didn't have many!
My favorite print was winnie the pooh lol.
Cr 10 s
I ave
So glad to be able to put a face to a legend. I enjoyed listening to your honest review too!
thankyou!! and thanks for all you've done with octolapse! you are huge legend yourself!
Thats very nice prints!!
Liked the video keep it going man!
I would love to see a video comparing your experiences with the MMU2s to this dual drive machine. I can't help but what the pros and cons are for each. I love the videos- keep up the great work!
Nice video.
I have also a 3D-printer with dual extruder.
In the Gcode, there is mostly one command for the toolchange. I replace this command by the same command plus some others to
park the extruders on a place where towers will be build,
heat up the next extruder to 190,
cool down the last extruder to 200 and wait for that,
shut off the last extruder,
heat next extruder to 240, wait for that and then go on with printing.
In the STL-files, I add the towers (cilinders 1 cm across), height depends on the last layer with dual colours.
Congratulations! Your channel is a "obra prima", when talk about 3d Prints and time lapses in RUclips. Brasil, Paraná, Campo Largo, near Curitiba.
I'm waiting for you buddy thanks for some for the best vids it gives me good ideas for things to 3d print
Can't wait for it to drop already looks like a good video
awesome! glad these inspire you! :)
Very nice work and such clean videos. Been looking at this printer for the last few weeks as my entry into the 3d world thanks for the vid
awesome! glad you enjoyed and let me know if you have any questions!
@@WildRoseBuilds Cool and thanks again for being so helpful. Done a bit more research on the printer as it being my 1st. Can I ask are you able to tell if there is any thermal proctection on the hero d3 or are you able to test it many thanks again. peace.
@@peterwasere Yes, we have added this function to the firmware
Your videos and prints are amazing. I can watch it for hours. Thanks for taking the time to share.
I am really new to 3-D printing, so I am not understanding the cover around the panda etc. I understand supports, mostly. lol.
Does it have something to do with support?
this panda looks awesome!
yeah that lil guy turned out great!
I always enjoy your videos!
Thanks Michael!
Those awesome purge blocks are not plain blocks anymore. Hope they are not wasted. Nice printing of the models.
Yeah! these are also easier to shred up when it comes time to recycling them ;)
The 8bit abra scream was a perfect addition ✅✅
I have bought a Hictop D3 Hero, actually this video convinced me this was the right dual nozzle printer for me.
I have printed the box and the panda with an ooze shield, sliced in Cura 4.1.
I have added a brim, but in my prints the brim both attaches to the ooze shield as well as the printed model. In your video it looks like the brim only attaches to the shield, which I would prefer.
Have you used Cura or another slicer?
If it is Cura, how do I avoid the brim attaches to the model?
I love dual extruader :D
is the thing around the print only for changing the extruder?
I love the Abra and the pink cat in the box.
23 hours ! cant wait
Your work is so awesome.
thanks Mary!
Your welcome. Merry Christmas and Happy new year.
Very Cool!!
Excelente trabajo amigo, podrías decirme cómo se llaman las paredes que hace al rededor del modelo?
De antemano muchas gracias.
Hello, which printer or profile did you choose in S3D ?
I cannot find a Hictop / Tenlog in my S3D
Greetings
Bernhard
hi! Can you say, what the board inside? And firmware is a marlin or something proprietary?
can you please share your settings for the slicer?
hi, can you tell me, please, which video camera do you use?
Joel, what slicer do u use?
Hi Joel.
Brilliant video as always.
I really like that printer 😀
I love my d3 hero too ♥️ may i ask which filament the pink glitter (from the cat) is? It looks amazing!
its 3djake glitter pink i believe! :) happy printing!
Awesome
I really like your channel, the builds, and how you link to the models. It would be even cooler if there was text in the video naming the models as you print them. (So for this video, I guess the text would go "Question Block Planter," "Abra," "Cat in box," and "panda / 2 color grizzly bear?"
How do you print in two colors?
What's the wham bam thing? Link to this specific model to purchase? Awesome video, thanks so much!
I'll throw a link in the description real quick!
What layer height did you print? 0,1mm?
Awesome quality and beautiful timelapses!
Thanks so much! i usually use between .15mm and .2mm layer height depending on the size and detail of the model!
Nice Video. I have the same printer. It prints two-colors nicely. Are you having any success printing supports with PVA or HIPS?
not yet! i will have a video about that eventually!
IS that a layer shift near the bottom of the cat in a box? (on the cat where the box lids start)
yep :(
Awesome prints!
Do you know if this is a rebranded Tenlog D3 printer?
Does it work with Win10 (Tenlog only writes winXP and Win7)?
I have asked the engineer and was told that it works with windows 10
Hi, which cam do you use?
I love your videos! Keep up the good work! =)
Just out of curiosity, as I'm recently learning about 3D printing, why does these multicolor models require that "support/wall" around the model itself? Is it something necessary and, if so, does it waste a lot of material in the process?
Thankyou so much! That's an ooze shield that catches anything that oozes from the parked extruder as it returns to the print. it also acts as a skirt for each layer to purge the nozzle ;)
@@WildRoseBuilds Awesome. Thanks for the tip! =)
Not to mention a fun little reveal at the ended up of each build
So cool!!!!,
It builds the ooze shield all the way to the top, even after color changes have stopped? Weird.
What filaments are the glittery ones?
3d jake ecoPLA! they have a whole bunch of sparkle colors! :)
Thanks for this nice video. Did you have experience with pva for support with this printer?
not yet, i will do a video on this in the future i'm sure!
@@WildRoseBuilds because PVA is very expensive, I am thinking about a support from current filament and only one or two layers PVA on top of the support to clear dividing support and model
When I seen the thumbnail I was like that Is a messed up looking winnie the pooh, then I realized it was a pokemon
haha yeah i got that comment a lot on instagram. maybe i should do winnie the poo! ;)
@@WildRoseBuilds yeah....maybe do all the characters from the show.
Do you know if your printer has the A4988 drivers or the TMC drivers (2130/2208/2209)?
4988
You can change the drives to TMC2208 by yourself
No, unfortunately not. The drivers are soldered on the board.
@@prebenhansen9846 Sorry, we tried to make some of the soldered mainboards and changed it back to the separate one after we know that people may need to change the drives if they want
Thats very cool and awesome quality. I have this printer too, but im miles away from your quality ! can you share your settings with me, which slicer do you use ?
Hope u can give me some Tipps for this printer ! Im working with Cura !
Greetings from Germany !
You can write to our aftersales team, and show us your setting and the photos of your prints, then we will offer suggestions to you accordingly
@@hictop8293 cool, that will i do !
DROP THIS
Круто ! (хотя из сказанного я ничего не понял, но изделия хорошие получились и принтер крутой, и не такой дорогой по сравнению с некоторыми но вреде бы ничем не уступает)
🔥 saludos desde Colombia, crack
i fell asleep i video back and your song was in my dream
Could you please share the settings?
i didnt have to tune this guy at all! i used the default printer profile in simplify for this machine!
Oh, thanks never had these results that you got, maybe i should try your filament. Thanks :)
Hello, which printer or profile did you choose?
I cannot find a Hictop / Tenlog in my S3D
why the walls..? it doesnt provide any support and consumes tons of filament....unless your room is super windy???
its an ooze shield, it catches any of the material that oozes from the parked extruder. its essentially a skirt except for the whole z height
I wander what his house looks like with all the 3D prints in it.🤔
yeah i have a lot of prints in my house haha
That overhang on Abras chin...
Very good quality, but this printer is too expensive for me.
Music?
Panel its alüminyum?
spring steel!
*А зачем по краям заборчик печатается????*
Je suis français si tu comprends bien jouer
Why not create a car model ?
not much of a car guy but i will add a few to the print queue!
@@WildRoseBuilds thanks ♥️🌹
Hi. I guess Artillery Genius was best.
yeah i really like the genius!
Привет из России. Ты печатаешь все слоем 0.1? Какая скорость печати?
I had never seen your face before
I remember an old video of yours that had you printing tunnels and plugs and I kinda wonder why don't you wear generic or 3d printed tunnels/plugs and leave your loabs to just hang there
woah an OG subscriber!! i spend a lot of time with headphones or ear protection on and having tunnels or plugs in breaks the seal of the earcups around my ears so i've left them out for quite some time now!
@@WildRoseBuilds love your work. Got me into 3d printing
Ave me cr 10 s
It is kinda stupid it keeps printing the purge tower till the end even if no color swaps remain
You should make transformers
i really should!! ;)
WildRoseBuilds like some how make it a foldable print that would be cool
Gg man
sif not install ur ear gauges D: or 3d print some sick ones :|
like comment and surprise :P
haha yeah after 15 years of wearing them they've gotten a little annoying ;)
@@WildRoseBuilds yea fair- just looks a bit grody having them hang loose for the video :P but yeah good work showing ur face! lots of courage especially with a face like th.... nah joking u look great hahaha ^_^ but yeah lots of courage putting yourself out there and speaking publically ^_^ good work. i wouldent have the guts to do public speaking like that. looking forward to more CNC content and reviews - hopefully you get more nice bots to share ^_^ - and ignore all the sellout comments they're just jelly
😊😊😊😊💓👍✌
schrodinger's cat
Thats a ton of waste from that weird raft around the prints.
It's a draft shield. It's better than a simple purge tower since you can keep drafts out and control ambient temp better... Especially for something like ABS without a chamber.
@@3dPrintingMillennial oh neat.
yeah draft and ooze shield. it grabs anything that oozes out of the parked extruder as it returns to the print ;)
@@WildRoseBuilds oh guess thats needed doing 2 nozzles eh?
G
Did you sell your soul to the devil in order to get such great quality prints???
hahaha maybe...
больше не показывать это длиноволосого парня
Nice prints and Printer, but to much material waste
Hmmm... You seem to have a ton... Like a ridiculous amount of filament waste... There are so many better ways to print than to waste all that filament. but hey... If you can afford it...