Hi finally someone got and test my idea :) I just want to know if it is safe? 18650 batteries are known to explode on vapes so I wonder how safe they are? also can you try that on 2 18650 to double the capacity? thanks man !
It takes 8-9 hrs to charge Cell. 2pcs won't charge ,current from capacitor charge is only 80 to 100 mA. if you want to connect two in parallel you will need to charge the battery with external charger.
If you want to use lithium-ion battery make sure you use tp4056 circuit with auto cut off.Without tp4056 its dangerous to use this battery as there is a risk of explosion if battery is over charged.The circuit which comes with such rackets is not suitable for lithium-ion batteries.
if hissing noise is coming from bat net mesh, then it is working as good as new and net clean. 😃 if it coming from some part of circut or battery , you may leaked components.
positive goes to the switch, there should be a small + and - sign on the board printed. if you +,- not printed then you will need to check the bridge rectifier output to find the +ve and -ve terminals.
For safety you should connect lithium battery with tp4056 charger because of lithium explosive nature
No tp4056? Is it safe?
how about if i use 2000mah 18650 battery how many hours to make it fully charge?
Hi finally someone got and test my idea :) I just want to know if it is safe? 18650 batteries are known to explode on vapes so I wonder how safe they are? also can you try that on 2 18650 to double the capacity? thanks man !
It takes 8-9 hrs to charge Cell.
2pcs won't charge ,current from capacitor charge is only 80 to 100 mA. if you want to connect two in parallel you will need to charge the battery with external charger.
If you want to use lithium-ion battery make sure you use tp4056 circuit with auto cut off.Without tp4056 its dangerous to use this battery as there is a risk of explosion if battery is over charged.The circuit which comes with such rackets is not suitable for lithium-ion batteries.
Now also can we charge the bat as usual? Please reply.
yes
Does it have a charging protection like bms or something?
no, for Bms charging check my other video ruclips.net/video/dCl3T_SGPw8/видео.html
why other video they put a tp4056 for charging..
can u explain it?
it will protect battery from overcharging.
No BMS. No charging plug.
Very unsafe design.
Charg ho sakata hai us bridg rectifier se ye battery ya dusara charger lagana padega kya sir
Plz batao sir
yes it will charge.
How to protect from over charging. How many hours have to keep charging. Reply
if you are worried about overcharging you can use the method in this video.
ruclips.net/video/dCl3T_SGPw8/видео.html
Can we charge with ac adaptor cable
check this video for adapter charging. ruclips.net/video/dCl3T_SGPw8/видео.html
Sir when we connect 18650 /3.7v /2000 mah battery button dbatte hai tou suuu suuu ki awaj atti hai ... Spark sahi karta hai awaj kyo atti hai
if hissing noise is coming from bat net mesh, then it is working as good as new and net clean. 😃
if it coming from some part of circut or battery , you may leaked components.
Isme Kitana time lagta hai 1200 mah ki bettery ko charge hone hai
5-6 hrs
श्रीमान जी क्या आप बता सकते हैं कि इस बल्ले का नेट कौन बनाता है या कहाँ मिलता है। उसके बारे मे जानकारी देने की कृपा करें
I have tried this but the power is not strong like the default battery.
if it not sparking with good battery , your bat may have other defective part like the transistor , or the 2000V capacitor, so check these too.
Can we use 9v battery
no, only 4-4.5v max.
sir...successfully teek hua hai lekin ye battery risk hai kya aur ye battery kitne der charging kar ne se accha rahega
hi , if you have used 2000 mah battery once fully charged it can work for many days. you can put in charge for 2 hr after full usage for 1-2 days.
@@thevideostudeo ok thank you
how to protect from over charging. how much time should i charge the lithium battery?
check description.
@@thevideostudeo1:01 1:03
Full Charging time kya he 18650 ka
plz check description.
1.2 volt 1000 mah work karegi kya bat me
yes it can work, but at least 3v needed for circuit to work properly . so you need 2 cell in series.
@@thevideostudeo can you suggest me another battery which work better or provide any link to buy because I didn't find in near market
@@GauravYadav-qx4cn we can use Nicd cells in series.
Laptop ki battery lagane ke bad meri charging light ki LED nahi jal rahi hai jab ki LED light new and thik hai
what voltage is battery showing in multi-meter if tested in open circuit.
also check if you connected battery in correct polarity.
Bolo mere bhai bolo nuban bolne me liye di he koi andha huva to sunke tik karlega bat ko koi bbera huva to dekh me shi kar lega bolna jrori he
Battery ka prove kitna hh sir please bataiye
100 to 200 /-
Bina charging module ke jugad se lithium ion battery blast ho sakti hai bro Aisa jugad mt sikhao
Nice
Thanks
Battery lng ba ang gagalawin, wala nang iba?
?? english please
Sir kitne volt ki battery hai
4.0v li-ion.
Mere Bhai lithium battery ko acid circuit se charge karoge... Wrong connection hai don't try
hi
you can use this method instead.
ruclips.net/video/dCl3T_SGPw8/видео.html
Sir after replacing the battery can it be recharge using the built in charging terminal?
yes
No it wouldn't
ye 4V Li-ion battery kahan milta hai aur kitne ko milta hai?
you can find it on shopping websites, I took out 1 piece from power bank.
Cutting the wire of mosquito bat one end and connecting wire with ac adaptor
for charging with adapter use this method
ruclips.net/video/dCl3T_SGPw8/видео.html
Is it 18650 battery?
yes
sirip dikhane se kuch nahi hogi , har kisi ko batana vi hoga ok tab tumara vdo dekhigi or like kare gi ok
Charging hoti hai kya
yes
My battery wire not connected to circuit board it’s broken both +ve and -ve so tell me how to connect if I give wrong connection then it’s a big prblm
positive goes to the switch, there should be a small + and - sign on the board printed. if you +,- not printed then you will need to check the bridge rectifier output to find the +ve and -ve terminals.
Lama bgt ...
Aap video me bolo
Garibi me kaam dikhra bhai
H
Mera Bar Pe Spark Ho Raha Hai Phir Bhi Machhar Nhi Marta Kyun
dirty net , battery low, transistor or capacitor defective.
Spark ho raha hai battery maine badla hai 3.7 ka lithium ion battery or net ko kaise saaf kare
@@Urlipumallik if you have metal polish or
WD 40, or you can use kerosen oil.